• Spatial Information Research
• /
• v.20 no.3
• /
• pp.15-25
• /
• 2012

In order to resolve transportation system focused on vehicles which have led to all sorts of problems such as traffic congestion, air pollution and so on, Korea recently have tended to center around Transit Oriented Development(TOD) which is capable of initiating public traffic demands. It is imperative to develop objective evaluation method which is able to measure pedestrian environment and amenity in order to facilitate green transit. The purpose of this paper is to present evaluation indices and measurement framework of pedestrian environment by analyzing effect on TOD major planning factors such as diversity, density, design, and supply etc. For this, we applied evaluation index with regard to TOD planning factors, investigating connection to pedestrian and employed AHP (Analytic Hierarchy Process) so as to quantify the result of measurement in Jongro 3ga and Hangangjin station. As a result, we presented relationship between travel patterns of pedestrian and each TOD planning factor. More importantly, the proposed framework is expected to make the best of the visualization as well as evaluation method for the pedestrian accessibility, convenience of public transportation, and the mixed land-use patterns in subway area and transit center.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.20 no.4
• /
• pp.143-148
• /
• 2020

In the case of a system that detects and controls the phase of an alternating voltage, the analog control method compensates the phase offset part by filtering for the detected phase and applies it to the control. However, in the digital control method, precise control cannot be achieved due to an error between the operating frequency of the microprocessor or the microcontroller and the input phase time when controlled using such phase detection. In general, when the method used is a certain time, the accumulated error is compensated and adjusted at random. To solve this problem, a method of detecting a zero point in real time and compensating for the operating frequency of the microprocessor is needed. Therefore, the research to be performed in this paper to reduce these errors and apply them to precise digital control is as follows. 1) Research on how to implement Zero Crossing Detection algorithm through simulation modeling to compensate the zero point to match the operating frequency through detection. 2) A study on the method of detecting zero points in real time through the Zero Crossing Detection design using a microcontroller and compensating for the operating frequency of the microprocessor. 3) A study on the estimation of the rotor position of BLDC motors using the Zero Crossing Detection circuit.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.6 no.2
• /
• pp.63-71
• /
• 2002

This paper examines the ASCE first generation benchmark problem for a seismically excited cable-stayed bridge, and proposes a new semi-active control strategy focusing on inclusion of effects of control-structure interaction. This benchmark problem focuses on a cable-stayed bridge in Cope Girardeau, Missouri, USA, for which construction is expected to be completed in 2003. Seismic considerations were strongly considered in the design of this bridge due to the location of the bridge in the New Madrid seismic zone and its critical role as a principal crossing of the Mississippi River. In this paper, magnetorheological(MR) fluid dampers are proposed as the supplemental damping devices, and a clipped-optimal control algorithm is employed. Several types of dynamic models for MR fluid dampers, such as a Bingham model, a Bouc-Wen model, and a modified Bouc-Wen model, are considered, which are obtained from data based on experimental results for full-scale dampers. Because the MR fluid damper is a controllable energy-dissipation device that cannot add mechanical energy to the structural system, the proposed control strategy is fail-safe in that bounded-input, bounded-output stability of the controlled structure is guaranteed. Numerical simulation results show that the performance of the proposed semi-active control strategy using MR fluid dampers is quite effective.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.13 no.3
• /
• pp.11-19
• /
• 2009

Recently, concerns relating to the maintenance of large structures have been increased. In addition, the number of large structures that need to be evaluated for their structural safety due to natural disasters and structural deterioration has been rapidly increasing. It is common for the structural characteristics of an older large structure to differ from the characteristics in the initial design stage, and changes in dynamic characteristics may result from a reduction in stiffness due to cracks on the materials. The process of deterioration of such structures enables the detection of damaged locations, as well as a quantitative evaluation. One of the typical measuring instruments used for the monitoring of bridges and buildings is the dynamic measurement system. Conventional dynamic measurement systems require considerable cabling to facilitate a direct connection between sensor and DAQ logger. For this reason, a method of measuring structural responses from a remote distance without the mounted sensors is needed. In terms of non-contact methods that are applicable to dynamic response measurement, the methods using the doppler effect of a laser or a GPS are commonly used. However, such methods could not be generally applied to bridge structures because of their costs and inaccuracies. Alternatively, a method using a visual image can be economical as well as feasible for measuring vibration signals of inaccessible bridge structures and extracting their dynamic characteristics. Many studies have been conducted using camera visual signals instead of conventional mounted sensors. However, these studies have been focused on measuring displacement response by an image processing technique after recording a position of the target mounted on the structure, in which the number of measurement targets may be limited. Therefore, in this study, a model experiment was carried out to verify the measurement algorithm for measuring multi-point displacement responses by using a DIC (Digital Image Correlation) technique.

• Proceedings of the Korea Association of Information Systems Conference
• /
• 2004.11a
• /
• pp.349-365
• /
• 2004

기업의 또는 부문에서 구축된 각 정보시스템들은 시간이 지남에 따라 기업의 경쟁우위를 확보하기 위해 통합의 필요성이 증대하게 되었는데, 이러한 필요에 의해 제기된 것이 ERP(Enterprise Resource Planning: 전사적 자원관리)이다. 급변하는 기업의 내${\cdot}$외부 환경에 대해 신속하게 대응하기 위해 ERP 시스템을 도입하는 기업들의 수가 증가함에도 불구하고 ERP 원가관리시스템에 대한 연구는 아직까지 그 범위가 한정되었다고 할 수 있다. 본 논문은 ERP 도입 현황 및 원가관리시스템의 도입${\cdot}$설계현황자료를 바탕으로 하여, 중소기업의 ERP 원가관리시스템의 성공적 도입을 위한 방향을 제시하고자 한다. 중소기업에서 ERP 원가관리시스템을 도입할 때는, 원가관리시스템의 특성과 구축 목표, 구조 설계, 원가대상 설정 등과 관련된 다음과 같은 사항들을 고려하여야 성공적인 시스템을 구축할 수 있을 것이다. 첫째, ERP 원가관리시스템 특성 분석단계에서는 원가정보를 구성하는 내용의 충실성뿐만 아니라 정보가 전달${\cdot}$제공되는 범위와 대상의 적합성과 함께 그 표현의 형식 또한 고려되어야 한다. 둘째, ERP 원가관리시스템 구축목표 설정단계에서는 인가관리정보의 산출요건에 대한 명확한 이해와 목표설정을 기반으로 해야 한다. 셋째, ERP 원가 관리시스템 구조 분석 및 선계단계에서는 생산관리시스템 및 원가대상 설정 분석이 이루어져야 한다. 넷째, ERP 원가관리시스템 구현단계에서는 원가관리시스템과 타 계열시스템과의 인터페이스를 고려해야 한다. 따라서 원가관리시스템의 구현 시에는 관련시스템에서 어떠한 정보론 인터페이스 받을 것인가를 명확히 하여 시스템 가동 시에 타 관련시스템과 원활한 연계가 되도록 함으로써 전사적 종합시스템이 되도록 하여야 학 것이다.RS와 제진장치에 대한 전체적인 성능평가를 성공적으로 수행하였으며, 운전결과 및 경험은 향후 상용설비를 위한 기본자료로 활용할 것이다.X>, 그리고 입원기간은 $21.6\pm14.3일(13\~56)$이었다. 수술 후 평균 CK-MB는 $11.3\pm14.1ng/mL$였다. 수술 후 조기 혈관 개존율은 $100\% (24/24)$였다. 모든 환자에서 완전 추적이 가능하였으며 평균 추적기간은 $20.4\pm15.2개월(5\~43)$이었다. 이 기간 중 사망환자나 흉통이 재발한 환자는 없었다. 걸론: 80세 이상 고령의 환자에서 OPCAB은 수술 후 합병증을 줄이고 좋은 결과를 보여 주었다. 그러므로 고령의 환자에서도 관상동맥우회술의 적응증이 되면 적극적으로 수술을 시행할 필요가 있으며, 수술방법은 OPCAB이 좋을 것으로 생각한다서 실용적 개발의 가능성을 보였다.에 따라 현저한 차이가 있었으며 Dimethoate처리$(30^{\circ}C,\; 0.2\%$액에서 24시간)에 의하여 볍씨의 호흡량이 감소되었다. 9) 산소호흡량과 평균발아소요일수와는 $\gamma=-0.945$로 부의 유의한 상관을 보였는데 산소호흡량이 많은 품종은 평균발아소요일수가 짧은 경향을 보였다. 10) 볍씨의 산소호흡량과 Dimethoate 처리에 의한 볍씨의 발아저해도와는 $\gamma=-0,771$의 높은 부의 상관을 보였으며 산색호흡량이 많은 품종이 발아저해도가 낮고 적은 품종에서는 높았다. 현재까지는 그 활동이 11.2년의 주기성을 보여주지만 그 이전에 있어서는 그 활동이 극히 약화되었을 뿐만 아니라 매우 불규칙하다는 것이 Schneider와 Mass(1975)에 의해 밝혀졌다. 결국 1710년대부터 현재까지 우리나라에 있어서 벼멸구와 흰

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.35S no.10
• /
• pp.144-155
• /
• 1998

The array weights that will maximize the SNR for any type of noise environment are determined by the function of the antenna design configuration and the directions of receiving target and interference signals. The conventional SLCs(sidelobe cancellers) using the SNR maximization perform worst from the saturation of the receiving system of main channel when the main antenna has pattern with high gain at the arrival angle of strong interference. In this paper, the new SLC is accomplished by using two independent antenna architecture. Main antenna is implemented with adaptive nulling, which is used for rejecting high-power interference primarily. Auxiliary antenna is realized with adaptive array for receiving interference signal to be suppressed completely, which has a characteristics of sufficient gain for every direction. The new SLC is implemented with above both antennas. We show that the new SLC, which consists of the adaptive nulling main antenna and the adaptive array auxiliary antenna, is useful in reducing the effect of strong interference like jammer, because the adaptive nulling at main antenna prevents its receiver and signal processor for saturation by strong interference. The proposed SLC has improved SNR over the conventional SLCs. The improved SNR at sidelobe region is typically more than 7 dB for a given test signal. Moreover, it improves the SNR of about 20 dB under strong interference at mainlobe.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.5 no.3
• /
• pp.149-158
• /
• 2005

This paper describes design, fabrication, and application of the silicon based temperature controllable micro reactor. In order to achieve fast temperature variation and low energy consumption, reaction chamber of the micro reactor was thermally isolated by etching the highly conductive silicon around the reaction chamber. Compared with the model not having thermally isolated structure, the thermally isolated micro reactor showed enhanced thermal performances such as fast temperature variation and low energy consumption. The performance enhancements of the micro reactor due to etched holes were verified by thermal experiment and numerical analysis. Regarding to 42 percents reduction of the thermal mass achieved by the etched holes, approximately 4 times faster thermal variation and 5 times smaller energy consumption were acquired. The total size of the fabricated micro reactor was $37{\times}30{\times}1mm^{3}$. Microchannel and reaction chamber were formed on the silicon substrate. The openings of channel and chamber were covered by the glass substrate. The Pt electrodes for heater and sensor are fabricated on the backside of silicon substrate below the reaction chamber. The dimension of channel cross section was $200{\times}100{\mu}m^{2}$. The volume of reaction chamber was $4{\mu}l$. The temperature of the micro reactor was controlled and measured simultaneously with NI DAQ PCI-MIO-16E-l board and LabVIEW program. Finally, the fabricated micro reactor and the temperature control system were applied to the thermal denaturation and the trypsin digestion of protein. BSA(bovine serum albumin) was chosen for the test sample. It was successfully shown that BSA was successfully denatured at $75^{\circ}C$ for 1 min and digested by trypsin at $37^{\circ}C$ for 10 min.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.11
• /
• pp.226-233
• /
• 2013

In this study, In Laver's automatic drying device, laver thickness measurement and control devices that are associated with. Disconnect the water and steam, after put a certain amount of the mixture(water and laver) in the mold. In process, Laver of the size and thickness (weight) to determine, constant light source to detect and image LED Lamp occur Vision Sensor (Camera) prepare, then the values of these state of the image is transmitted in real time embedded computers. Built-in measurement and control with the purpose of the application of each of the channels separately provided measurements are displayed on a monitor, And servo signals sent to each of the channels and it become so set function should be. In this paper, the laver drying device, prior to the laver thickness measurement and control devices that rely on the experience of existing workers directly laver manually adjust the thickness of the lever, but the lever by each channel relative to the actuator by installing was to improve the quality. In addition, The effect of productivity gains and labor savings are.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.11
• /
• pp.206-216
• /
• 2013

The emotion plays a critical role in human's daily life including learning, action, decision and communication. In this paper, emotion discrimination classifier is designed to reduce system complexity through reduced selection of dominant features from biosignals. The photoplethysmography(PPG), skin temperature, skin conductance, fontal and parietal electroencephalography(EEG) signals were measured during 4 types of movie watching associated with the induction of neutral, sad, fear joy emotions. The genetic algorithm with support vector machine(SVM) based fitness function was designed to determine dominant features among 24 parameters extracted from measured biosignals. It shows maximum classification accuracy of 96.4%, which is 17% higher than that of SVM alone. The minimum error features selected are the mean and NN50 of heart rate variability from PPG signal, the mean of PPG induced pulse transit time, the mean of skin resistance, and ${\delta}$ and ${\beta}$ frequency band powers of parietal EEG. The combination of parietal EEG, PPG, and skin resistance is recommendable in high accuracy instrumentation, while the combinational use of PPG and skin conductance(79% accuracy) is affordable in simplified instrumentation.

• Journal of the Korea Concrete Institute
• /
• v.22 no.1
• /
• pp.113-122
• /
• 2010

Corrosion of prestressing tendons and wire fractures in grouted post-tensioned prestressed concrete bridges have been considered as a serious safety problem. In bridge evaluation the condition of prestressing tendons should be inspected, and if corroded tendons are found, the loss of tendon area should be included when we calculate the ultimate strength. In the previous study, it was evaluated that continuous acoustic monitoring techniques could be considered as a reliable non-destructive method for detecting wire fractures of fully grouted post-tensioned prestressing tendons. In the present study, an experimental test was performed for detecting wire fractures of post-tensioned prestressing tendons which are prestressed lower than current design level. A 10 m prestressed concrete beam was fabricated, which included two tendons prestressed 66 percentage and 40 percentage of tensile strength, respectively. The corrosion of two tendons was induced by an accelerated corrosion equipment and the test beam was monitored by using seven acoustic sensors and a continuous acoustic monitoring system. From each prestressing tendon, two acoustic signals of wire fractures were successfully detected and source locations were estimated within 20 mm error. Based on the test results, it is considered that continuous acoustic monitoring techniques can be applied to detect low-prestressed wire fracture in fully grouted post-tensioned prestressed concrete beams.