• Journal of the Korea Concrete Institute
• /
• v.14 no.4
• /
• pp.474-482
• /
• 2002

The purpose of the study is to establish an optimum geometry and optimum geometry factor through bond test of a structural synthetic fiber, which fully utilizes matrix anchoring without fiber fracturing with the maximum pullout resistance. Seven deformed structural synthetic fibers with widely different geometries were investigated and pullout test was conducted. Included parameters are seven different types of fiber and two of mortar matrixes. The test result shows that the crimped type structural synthetic fiber is significant improvement in the interface toughness(pullout energy) and pullout load. The pullout test was performed with various size of crimped type structural synthetic fiber in order to invest optimum geometry factor, In the basis of the test results, optimum geometry factor is established such as D=b$^{{\alpha}0{\alpha}}$h$^{λ{\beta}}$.

• Journal for History of Mathematics
• /
• v.15 no.2
• /
• pp.15-32
• /
• 2002

The first part of this thesis gives some brief explanation of the theory and history of imaginary elements in analytic geometry in the 19th century. The second part of this thesis discusses the theory of imaginary elements of synthetic geometry in the first half of the 19th century. Then the next part mentions the theory of imaginary elements of geometry in the second half of that same century. Particularly Christian von Staudt's and Felix Klein's theories are handled in this part. Von Staudt, who has completed the system of the synthetic projective geometry, used ‘involution’ in order to introduce a new concept ‘imaginary elements’- imaginary points, imaginary lines and imaginary plane-in synthetic geometry. Klein applied von Staudt's theory as he convey the result of the research in algebraic geometry in a picture. Von Staudt's and Klein's research may be regarded as the top of the effort to investigate possible relationship between real and imaginary structures.

• 한국전산유체공학회:학술대회논문집
• /
• 2007.04a
• /
• pp.72-78
• /
• 2007

To develop the aerodynamic performance, there are widely two group of studies are achieved. The first one is about design of the vehicles geometry and the second one is about aerodynamic devices. Geometry design is highly credible and stable method. But it is not flexible and each parts are related interactively. So if one part geometry are modified, the other parts are required to be redesigned. The other hand, flow control by aerodynamic device is flexible and modulized method. Though it needs energy, relatively little input makes far advanced aerodynamic performance. Synthetic Jet is one of the second group method. The device repeats suction and blowing motion in constant frequency. According to the performance, the flow which are near the flight surface are served momentum. This mechanism can reduce the aerodynamic loss by boundary layer and separated flow. Synthetic jet actuator has several parameters, that influence the flow control. This study focus the parameters effects of the synthetic jet - orifice geometry, frequency, jet speed and etc.

• Communications of Mathematical Education
• /
• v.21 no.3
• /
• pp.451-466
• /
• 2007

Geometry in school mathematics is the field that has the possibility of diverse approach such as Synthetic Geometry and Analytic Geometry. Synthetic Geometry is handled in middle schools and Analytic Geometry in the first year of high schools. Therefore, this research show for the possibility of using Synthetic Geometry in high schools which was learned already in middle schools and the way of integrating both of them concretely. This is expected to help students understand the mathematical meaning of figures a lot.

• Journal for History of Mathematics
• /
• v.18 no.4
• /
• pp.29-38
• /
• 2005

This Paper discusses the history of the conflicts between synthesis and analysis, from those in heuristic and logic development style in ancient Greek to those in projective geometric methods. The two methods, which originally displayed difference in heuristic, offer the base for the two fields of geometry, the analytic geometry and the synthetic geometry in the 18th century as they originated from the field of geometry. As to the 19th century, they even display antagonistic aspects derived by having other perspectives about the true nature of mathematic but finally lose the reason of conflict as the ancient times when the dialectical sublation of both had been proposed.

• Journal of computational fluids engineering
• /
• v.12 no.2
• /
• pp.1-7
• /
• 2007

To develop an aerodynamic performance, two groups of studies have been achieved widely. One is about the geometric design of vehicles and the other is about aerodynamic devices. Geometric design is a credible and stable method. However, it is not flexible and each part is related interactively. Therefore, if one part of geometry is modified, the other part will be required to redesign. On the other hand, the flow control by aerodynamic devices is flexible and modulized method. Even though it needs some energy, a relatively small amount of input makes more advanced aerodynamic performance. Synthetic jet is one of the method in the second group. The device repeats suctions and blowing motions in constant frequency. According to the performance, the adjacent flow to flight surface are served momentum. This mechanism can reduce the aerodynamic loss of boundary layer and separated flow. A synthetic jet actuator has several parameters, which influences the flow control. This study focuses on the parameter effects of synthetic jet - orifice geometry, frequency, jet speed and etc.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2001.11a
• /
• pp.335-340
• /
• 2001

Recently in abroad, structural synthetic fiber developed, has been studied extensively as a substitute for steel fiber due to its properties such as corrosion-resistance, low density, good pumping, and in-place safety, etc. In this study, we conducted pull-out test, for seven different geometries of structural synthetic fibers and obtained optimum geometry for structural synthetic fiber which fully utilizes matrix anchoring without revealing fiber fracturing. According to pull-out test results, it was found that crimped type structural synthetic fiber give significant improvement in the interface toughness(roll-out enemy) and pull-out load.

• Journal of the Korea Concrete Institute
• /
• v.15 no.5
• /
• pp.643-649
• /
• 2003

The purpose of this study were evaluated to flexural and bond performance by sectional area and geometry change through bond and flexural test of a structural synthetic fiber. Six deformed structural synthetic fibers were investigated and pullout and flexural test was conducted. Included parameters is three different geometries of fiber and two of fiber sectional area. The test result shows that the cycles and amplitude of structural synthetic fiber increased, pullout load and pullout fracture energy decreased and flexural strength increased, if sectional area is same. The sectional area increased, pullout load and pullout fracture energy increased and flexural strength decreased, if cycles and amplitude of structural synthetic fiber is same. Based on test results, structural performance of the concrete could know that is influence by pullout performance of fiber as well as various factor (fiber number, material properties etc).

• Journal for History of Mathematics
• /
• v.15 no.1
• /
• pp.1-14
• /
• 2002

This paper treats the history of the fundament of projective geometry Especially we introduce the essence of the framework of Karl Chirstian von Staudt's ‘Geometrie der Lage’. Von Staudt used axiomatical method to bum the system of the projective geometry, and proved the fundamental theorem of projective geometry. And he handled imaginary elements (or the first time in synthetic projective geometry.

• Journal of Advanced Navigation Technology
• /
• v.15 no.4
• /
• pp.616-625
• /
• 2011

There are two representative geometry rendering methods. One is Geometry Clipmaps, another is ROAM 2.0. We propose an extended Geometry Clipmaps algorithm which does not focus on CPU operation but the GPU for faster and wider visibility area. The extended algorithm presents mesh configuration method of each level by LOD, how to configurate Mesh network between levels, mesh block method for rendering optimization using VFC, and image mapping method to get high resolution up to 1 m.