• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08a
• /
• pp.564-566
• /
• 2007

Synthesis of two photoactive compounds containing core imide moiety was carried out for an application to interdielectric layer in TFTLCD array. An aqueous alkaline developable polymer matrix was synthesized by free radical copolymerization. A positive photoresist formulation was developed utilizing synthesized UV monomers, photoactive compound, binder polymer, sulfactant and alkali developable polymer matrix. It was found that via-holes with good resolution, high transmittance and thermal resistance could be obtained by photolithographic process utilizing the new positive interdielectric material with high thermal stability.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2006.09a
• /
• pp.631-632
• /
• 2006

Cr-C-Ni composites were synthesized in situ from elemental powders of Cr, Ni and C by high energy milling followed by reactive sintering. The milled powders with the grain size in nano-scale were pressed to compacts and sintered. During the following thermal treatment at first the chromium carbide was formed and then the $Cr_3C_2-Ni$ cermets were sintered in one cycle. The interface between the binder phase and the carbide grains of the in situ composite has a good bonding strength as it is not contaminated with oxidation films or other detrimental surface reactions.

• Bulletin of the Korean Chemical Society
• /
• v.35 no.8
• /
• pp.2453-2459
• /
• 2014

Five novel cyanine dyes containing julolidine and indole moieties were synthesized. Several color compensating films for plasma display panels (PDP) were prepared using these dyes. The spectroscopic and physicochemical properties of the synthesized dyes in both solution and film state were evaluated. For each color compensating film, the optimum ratio of dye to binder was determined on the basis of transmittance, half band width, and photo-stability of the color compensating film. The five synthesized dyes showed sharp absorption peaks near 590 nm (orange light) and had molar extinction coefficients above $1{\times}10^5M^{-1}cm^{-1}$. The melting point of the dyes was above $200^{\circ}C$ and photo-stability of the color compensating films was improved by introducing substituents at the 5th position on the indole derivatives.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2008.11a
• /
• pp.231-236
• /
• 2008

The well-defined copolymers derived from Epichlorohydrin(ECH), Tetrahydrofuran(THF) were synthesized by Cationic ring-opening polymerization(CROP) with 1,4-Butandiol, a initiator, and $BF_3THF$ Complex, a catalyst via Activated monomer mechanism, which could lead to hydroxyl-terminated polyethers. The molecular weight of polymers were dependant on the ratio of [monomer]/[diol], Copolymer structures were controlled by monomers feed ratio, ECH and THF added. This polymers were functionalized from Chlorine group to Azide group using $S_N2$ reaction. Synthesized polymers were found to be as the prepolymer for polyurethane. Polyurethane was synthesized in the presence of N-100/IPDI mixture, a curing agent, and TPB(triphenyl bismuth)/MA(Maleic anhydride) mixture, a catalyst system. The curing behavior and mechanical properties of polyurethane after mixing with various prepolymer’s composition and the molecular weight were studied.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.22 no.5
• /
• pp.5-12
• /
• 2014

Weatherstrip coatings of urethane and silicon type which are fit to EPDM and thermoplastic materials are used in sealing systems for automotive applications for noise reduction and high slip characteristics for external applications, respectively. Polyurethane binder was successfully synthesized from poly(butyladiphate)diol (PBAD), poly(tetramethylene)glycol (PTMG) and isocyanate as starting materials. Then, polyurethane coating agents were prepared by using various additives. To investigate effects of segment types on the abrasion resistance of polyurethane coating agents, thin films based on polyurethane coating materials were fabricated. With increasing the amount of hard segment in the coating agent, abrasion resistance, modulus and tensile strength of the coating films were improved, but the elongation of the coating films was decreased.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.22 no.3
• /
• pp.399-407
• /
• 1998

The infrared reflection coatings with pigment can be used to protect the surfaces of combustible materials exposed to fire. To obtain high reflectivities in the infrared range (0.5-10.mu.m) important to fire, several dielectric pigments, such as titanium dioxide, iron oxide, and silicon, can be synthesized to polymer coatings. The theoretical analysis shows that the coating design with particles diameter in the 1.5 to 2.5.mu.m range and volume fraction in the 0.1 to 0.2 range is estimated to be optimal. In the analysis of the radiation, the dependent scattering, absorption by polymeric binder, and the internal interface reflection are considered. In addition, the temperature distribution in the semi-transparent coating layer and an opaque substrate (PMMA) is also presented.

• Tribology and Lubricants
• /
• v.18 no.5
• /
• pp.324-332
• /
• 2002

In order to enhance the thermal stability of binder materials of bonded type solid lubricants, several metal-alkoxide based sol-gel materials such as methyltrimethoxysilane(MTMOS), titaniumisopropoxide$(Ti(Opr^i)_4),$ zirconiumisopropoxide $(Zr(Opr^i)_4)$ and aluminumbutoxide$(Al(Obu^t)_4)$ were chemically modified by epoxy-, acrylic- and fluoro-silane compounds, respectively. Friction and wear characteristics of these hybrid ceramic materials were tested with a micro tribo-tester, and evaluated with respect to both heat-curing temperature and the time. Test results generally showed that hybrid ceramic materials modified by epoxy-silane compounds had a low friction compared to others. And the higher het-curing temperature and the longer heat treatment time resulted in the higher friction and the lower wear. IR spectroscopic analyses revealed that these results were caused mainly by the increased metal oxide content in hybrid ceramics when the heat-curing temperature was over $320^{\circ}C.$

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.381-381
• /
• 2011

In this study, a TiO2 colloidal sol was synthesized by sol-gel process, which was used as a "glue" agent to enhance interconnection of TiO2 particles in low temperature process for plastic dye sensitized solar cell. The crystalline phase of this TiO2 glue is pure anatase with average particles size of 5 nm, which was characterized by powder X-ray diffraction and high revolution-TEM. The viscous alcoholic paste without any organic binder was prepared from the mixture of commercial P25 powder and glue. Paste composition and sintering process parameters were optimized for high photovoltaic performance based on low temperature process. The electrochemical impedance spectroscopy and photocurrent-photovoltage transient spectroscopy were also employed to investigate the mechanism of electron transport in this binder free TiO2 film system.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.26 no.2
• /
• pp.31-43
• /
• 2008

The functional dyes, which has various optical characteristics that can be applicable to field of electronic, photo electronic, such as sensor or electrode, were synthesized. Physical property and optical stability was studied with preparation of conductive type film as a kind of optical filter of plasma display panel, by adapting neon cut off dye, which can selectively absorbing between 580 and 610nm wavelength. The filter was prepared with PSA resin, which has functional group of - COOH and - OH, as binder. And the characters such as spectroscopy, heat-proof / wet-proof, thermal stability and commerciality, which must be held by functional dyes, were examined. Conductive type film is the kind of film includes only neon cut off dyes. For the neon cut off dyes, cyanine dyes can be applied. And it is observed that spectrum of before and after the durability test are not changed due to stability of dyes, as the result of coating on the mesh film with PSA binder.

• Korean Journal of Materials Research
• /
• v.30 no.5
• /
• pp.217-222
• /
• 2020

The design and fabrication of catalysts with low-cost and high electrocatalytic activity for the oxygen evolution reaction (OER) have remained challenging because of the sluggish kinetics of this reaction. The key to the pursuit of efficient electrocatalysts is to design them with high surface area and more active sites. In this work, we have successfully synthesized a highly stable and active NiCo₂S₄ nanowire array on a Ni-foam substrate (NiCo₂S₄ NW/NF) via a two-step hydrothermal synthesis approach. This NiCo₂S₄ NW/NF exhibits overpotential as low as 275 mV, delivering a current density of 20 mA cm^-2 (versus reversible hydrogen electrode) with a low Tafel slope of 89 mV dec^-1 and superior long-term stability for 20 h in 1 M KOH electrolyte. The outstanding performance is ascribed to the inherent activity of the binder-free deposited, vertically aligned nanowire structure, which provides a large number of electrochemically active surface sites, accelerating electron transfer, and simultaneously enhancing the diffusion of electrolyte.