• Journal of the Korea Institute of Military Science and Technology
• /
• v.2 no.2
• /
• pp.30-39
• /
• 1999

In this paper, we have proposed a novel method which can compose a reflected signal of the underwater target. The synthesis of the reflected signal in the target, the synthesized signal being similar to the characteristics of the reflected signal in the real target, is used the highlight model at the specific points of the target. We suggest the synthesis method of the reflected signal of the target using the pulsewidth variation and each other doppler effect at the highlight point, and compare the composed signal by the proposed method with that by conventional one. Simulation results show that the composed signal using the proposed method and the reflected signal of the real target is similar to the spectral characteristics.

• Speech Sciences
• /
• v.4 no.1
• /
• pp.19-34
• /
• 1998

The author collected and compared midsagittal, coronal, coronal oblique, and transversal images of Korean monophthongs /a, i, e, o, u, i, v/ produced by a healthy male speaker using 1.5 T MR, VISION. Area was measured by computer software after tracing the cross-section at different points along the tract. Results showed that the width of the oral and pharyngeal cavities varied compensatorily from each other on the midsagittal dimension. Formant frequency values estimated from the area functions of the seven vowels showed a strong correlation (r=0.978) with those analyzed from the spoken vowels. Moreover, almost all of 35 students who listened to the synthesized vowels from area data perceived the synthesized vowels as equivalent to the spoken ones. Movement of constriction points of vowel /u/ with wider lip opening sounded /i/ and led to slight changes in vowel quality. Jaw and tongue movement led to major volume variation with an anatomical limitation. Each comer vowel varied systematically from a somewhat constant volume of the average area. Thus, the author proposed that any simulation studies related to vocal tract area variation should reflect its constant volume. The results may be helpful to verify exact measurement of the vocal tract area through vowel synthesis and a simulation study before having any operation of the vocal tract.

• Bulletin of the Korean Chemical Society
• /
• v.12 no.6
• /
• pp.666-673
• /
• 1991

The elongation of the chain length at 2'position of aminothiazolylacetamido group of cephalosporin antibiotics was achieved. The derivatives with elongated side chain at 2'position were successfully synthesis and their in vitro activities were evaluated. It is indicated that there is an optimum range of the chain length in order to exhibit higher biological activities. This result could open a possibility for the development of the cephalosporin antibiotics with higher activities by further variation of the substituents at other positions. The cephalosporin derivatives with a simple (relatively non-functionalized) side chain as well as with a linear extended side chain were also prepared. Low activities of these derivatives led to a conclusion that either simple (non-functionalized) change or linear elongation of the side chain does not enhance the antibacterial activities.

• The Transactions of the Korea Information Processing Society
• /
• v.5 no.3
• /
• pp.851-861
• /
• 1998

Korean language is to be characterized by the rich vocal sound variation. In order to increase the probability of vocal sound recognition and to provide a natural vocal sound synthesis, a systematic and thorough research into the characteristics of Korean language including its vocal sound changing rules is required. This paper addresses an effective way of vocal sound recognition and synthesis by providing the design and implementation of the Korean vocal sound variation rule. The regulation we followed for the design of the vocal sound variation rule is the Phonetic Standard(Section 30. Chapter 7) of the Korean Orthographic Standards. We have first factor out rules for each regulations, then grouped them into 27 groups for eaeh final-consonant. The Phonological Change Processing System suggested in the paper provides a fast processing ability for vocal sound variation by a single application of the rule. The contents of the process for information augmented to words or the stem of innected words are included in the rules. We believe that the Phonological Change Processing System will facilitate the vocal sound recognition and synthesis by the sentence. Also, this system may be referred as an example for similar research areas.

• Journal of the Korea Computer Graphics Society
• /
• v.15 no.1
• /
• pp.17-23
• /
• 2009

We present a simple new idea to improve the quality of exemplar based texture synthesis using multiple rotated input exemplars. Our algorithm successfully obtain rotational synthesis feature variations and manages to reduce the artifacts in the results, especially patch seams due to the structure of the exemplars provided which have been inappropriate for previous neighborhood matching synthesis algorithms. Our algorithm is parallel in nature, thus it is possible to implement our algorithm using GPU or multi-core CPU to accelerate synthesis process.

• The Korean Journal of Ceramics
• /
• v.2 no.4
• /
• pp.221-225
• /
• 1996

In diamond synthesis by metal film growth method under high pressure and high temperature, the nucleation and growth of diamond was observed dependent on the carbon source variation from graphite powder to the heat treated powders of lamp black carbon. At the low driving force condition near equilibrium pressure and temperature line, nucleation of diamond did not occur but growth of seed diamond appeared in the synthesis from lamp black carbon while both nucleation and growth of diamond took place in the synthesis from graphite. Growth morphology change of diamond occurred from cubo-octahedron to octahedron in the synthesis from graphite but very irregular growth of seed diamond occurred in the synthesis from lamp block carbon. Lamp black carbon transformed to recrystallized graphite first and very nucleation of diamond was observed on the recrystallized graphite surface. Growth morphology of diamond on the recrystallized graphite was clear cubo-octahedron even at higher pressure departure condition from equilibrium pressure and temperature line.

• Speech Sciences
• /
• v.8 no.1
• /
• pp.7-19
• /
• 2001

The acoustic parameters of nine Korean numbers were analyzed by Praat, a speech analysis software, and synthesized by SenSynPPC, a Klatt formant synthesizer. The overall intensity, pitch and formant values of the numbers were modified dynamically by a step of 1 dB, 1 Hz and 2.5% respectively. The study explored the sensitivity of listeners to changes in the three acoustic parameters. Twelve subjects (male and female) listened to 390 pairs of synthesized numbers and judged whether the given pair sounded the same or different. Results showed that subjects perceived the same sound quality within the range of 6.6 dB of intensity variation, 10.5 Hz of pitch variation and 5.9% of the first three formant variations. The male and female groups showed almost the same perceptual ranges. Also, an asymmetrical structure of high and low boundary was observed. The ranges may be applicable to the development of a speaker identification system while the method of synthesis modification may apply to its evaluation data.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.04b
• /
• pp.61-64
• /
• 2002

A novel ceramic synthesis technique, combustion synthesis, is explored to produce a orange-emitting $SnO_{2}:Eu^{3+}$ phosphors. This technique involves a reaction of metal salts with a citric acid as an organic fuel. The variation of the ratio of citric acid to metal introduces change in reaction temperature and atmosphere of the combustion reaction, which in turn influences crystallinity and luminescence properties of the final products seriously. And, the heat treatment of the as-synthesized product increases its luminescence intensity. Especially, the samples treated at above $1100^{\circ}C$ show a orange-emission peak, which is attributed to the formation of single phase and well-crystallized $SnO_{2}:Eu$ oxides in the rutile structure

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2010.05a
• /
• pp.11.1-11.1
• /
• 2010

As one of the non-vacuum, low temperature fabrication route, electrochemical synthesis has been focused for pursuing the cost-effective pathway to produce high efficiency photovoltaic devices. Especially the availability to form the thin film structure on flexible substrate would be the great advantage of electrochemical process. The successful synthesis of the most favorable absorber materials such as CdTe and CIGS has been reported by many researchers, however, the efficiency of electrochemically synthesized could not exceed that from vacuum process, because of microstructural controllability and compositional variation on devices. In this study, we represent the effect of process parameters on the microstructure and composition of compound semiconductor during the synthesis, and propose the photovoltaic characteristics of electrochemically synthesized solar cells.

• Journal of the Korean Ceramic Society
• /
• v.32 no.9
• /
• pp.1085-1091
• /
• 1995

Molybdenum disilicide (MoSi2) was synthesized from Mo, MoO3, Si and Al powders by self-propagating high temperature synthesis (SHS). The effect of processing parameters such as Mo/MoO3 molar ratio, Ar gas pressure in the reactor and pressing pressure of compacts in synthesis of MoSi2 were investigated. h-MoSi2 was transformed into t-MoSi2 with increasing the Mo/MoO3 mole ratio, and only t-MoSi2 phase was identified above 3.5 : 1 (molar ratio). The synthesized phases did not change with the variation of Ar gas pressure and pressing pressure of compacts. It was found that the combustion temperature was above 2,50$0^{\circ}C$. The products were separated into MoSi2 (s) and $\alpha$-Al2O3 by the difference of their specific grativities. Bending strength, hardness and density of sintered specimen exhibited 82 MPa, 5.368 GPa and 5.43 g/㎤, respectively.