• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 B
• /
• pp.811-812
• /
• 2006

본 논문은 부하상태에 따른 매입형 영구자석 전동기에서의 역기전력 파형을 제시하였다. 유한요소해석에 기초한 고정투자율법을 사용하여 무부하 상태뿐만 아니라 부하상태에 따른 역기전력 파형을 해석하였고, 매입형 영구자석 전동기의 설계변수가 역기전력 파형의 고조파 성분에 미치는 영향을 조사하였다.

• Journal of Electrical Engineering and Technology
• /
• 제13권2호
• /
• pp.849-857
• /
• 2018

This paper aims is to study the effect of photovoltaic generation penetration and STATCOM on the transient stability of a single machine infinite bus (SMIB) system based on the rotor angle stability. The influence of STATCOM and PV penetration can be seen through damping oscillations, so that the generator remains stable with the rest of the system for various fault conditions. The simulation results obtained make it possible to efficient identify harmful and beneficial impact of increasing the PV penetration and the existence of STATCOM capability. The system model is created in MATLAB/ SIMULINK software.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2018년도 전력전자학술대회
• /
• pp.66-68
• /
• 2018

6상 전동기는 높은 신뢰성과 토크 리플의 저감 등의 성능 이점으로 인해 다양한 산업 분야에서 고려되고 있다. 6상 전동기는 일반적으로 두 3상 권선의 형태로 모델링할 수 있으며, 독립된 두 개의 전류 제어기를 사용하는 경우, 두 3상 권선 간의 상호 간섭 인덕턴스의 영향으로 인하여 불안정해지는 특성이 있다. 안정적인 전동기 구동을 위하여, 비대칭 6상 전동기의 상호 간섭 영향을 최소화하는 전류 제어기가 필요하다. 이를 위해, 본 연구에서는 이산 영역에서의 6상 전동기의 전류 제어 폐루프 응답 특성을 분석하고 비간섭 (Decoupling) 전류 제어기 구조를 제시한다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2008년도 하계학술대회 논문집
• /
• pp.292-294
• /
• 2008

최근 환경 파괴와 에너지 고갈에 대한 문제들이 사회의 큰 문제로 대두 되면서 풍력발전의 중요성이 증가하고 있다. 본 논문에서는 LabVIEW를 이용하여 이더넷(Ethernet) 환경에서의 풍력발전 원격감시 제어시스템을 구현하였다. 제안된 원격감시 제어시스템은 풍력발전 시스템의 MCU와 W5100의 SPI(Serial Peripheral Interface)를 통한 이더넷 통신용 하드웨어를 구축하였으며, NI사의 LabVIEW를 이용하여 서버상의 HMI(Human Machine Interface) 소프트웨어를 구현하였다. 본 연구의 실험을 위해 영구자석형 동기 발전기(PMSG:Permanent Magnet Synchronous Generator)를 이용하여 풍력발전 시스템 모델을 구현하고 이를 이용하여 원격감시 제어시스템의 성능을 검증하였다.

• Journal of international Conference on Electrical Machines and Systems
• /
• 제1권3호
• /
• pp.274-281
• /
• 2012

This paper discusses the issues associated with the design of high speed machines for applications with a wide constant-power region requirement. Using described multi-domain design environments which put equal weight on the electromagnetic, thermal and mechanical considerations, the suitability and power density achievable using Induction Machines (IM) and Permanent Magnet Synchronous Machines (PMSM) are compared.

• 대한전기학회논문지
• /
• 제43권3호
• /
• pp.372-380
• /
• 1994

A systematic procedure for the elements of system state matrix in multimachine systems with loads and eigenvalue technique which utilize stage matrix have widespread application in the analysis of small signal stability. Synchronous machines are represented by either a two-axis model or classical model. The interrelationship of submatrices of system matrix is investigated. Once elements of one submatrix are determined, they can be used to calculate the elements of the other submatrix. The approach is useful in the eigenvalue sensitivity analysis for various initial conditions and for the adjustment of generator controller parameters. It is illustrated for a three-machine and nine-bus multimachine system(WSCC system) with constant impedance loads.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 A
• /
• pp.85-87
• /
• 1998

In general, we apply the 2 dimensional method to analyze the characteristic of electric machinery. But it is very difficult to analyze the air-cored machine like as superconducting generator, because it have 3 dimensional flux distribution. In this paper, we compare the analysis r between 2D and 3D. 3D Finite Element Meth applied to the superconducting generator at n condition. And we studied the characteristic acc to the axial length of magnetic shield.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2005년도 춘계학술대회 논문집
• /
• pp.97-102
• /
• 2005

This paper presents feed rate optimizaton of a PMLSM driven feed-slide for mininum vibrations by smoothing velocity curve with finite jerk. First of all, the PMLSM was designed and made to reduce detent force. Next, a PMLSM driven feed-slide system was mathematically modeled as a 4-degree-of-freedom lumped parameter model. The key idea of our vibration minimization method is to find out the most appropriate smooth velocity curve with finite jerk. The validity of our proposed method has been verified by comparing computer simulation results of the feed-slide model with experimental ones.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제51권2호
• /
• pp.83-91
• /
• 2002

This paper presents a new speed and position sensorless control method of permanent magnet synchronous motors based on the sliding mode observer. Since the parameter of the dynamic equation such as machine inertia or viscosity friction coefficient are not well known and these values can be easily changed generally during normal operation, there are many restrictions in the actual implementation. The proposed adaptive sliding mode observer applies adaptive scheme so that observer may overcome the problem caused by using the dynamic equation. Furthermore, using the Lyapunov Function, the adaptive sliding mode observer can estimate rotor speed as well as stator resistance. The feasibility of the Proposed observer is verified cia the experiments.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제51권12호
• /
• pp.697-703
• /
• 2002

Interior permanent magnet synchronous motor(IPMSM) is widely used in many applications such as an electric vehicle, compressor drives of air conditioner and machine tool spindle drives. In order to maximize the efficiency in such applications, this paper is proposed the optimal control method of the armature current. The controllable electrical loss which consists of the copper loss and the iron loss can be minimized by the optimal control of the armature current. The minimization of loss is possible to realize efficiency optimization control for the proposed IPMSM The optimal current can be decided according to the operating speed and the load conditions. The proposed control algorithm is applied to IPMSM drive system, the operating characteristics controlled by efficiency optimization control are examined in detail by simulation.