• 한국지능시스템학회논문지
• /
• 제14권6호
• /
• pp.759-763
• /
• 2004

본 논문에서는 음성을 본인이 아닌 사람의 음성으로 변환시키기 위하여 피치 변환 기법을 사용한 실시간 음성 변환 방법을 제안하였다 이러한 목적을 위하여 DFT((Discrete Fourier Transform)를 사용한 표본화율 변환 방법과 SOLA(Synchronized Overlap and Add) 방법을 사용한 시간축 변환 방법을 결합하여 피치를 변환시켰다 제안된 방법의 성능을 평가하기 위하여 음성 변환 실험을 수행하였다. 실험 결과에서 원 음성 신호는 원 화자의 신원을 알기가 어려운 음성 신호로 바뀌는 것을 알 수 있었다. 제안된 시스템은 시스템의 실시간으로 구현될 수 있는지 확인하기 위하여 TI TMS320C6711DSK 보드를 사용하여 구현되었다.

• 전기학회논문지P
• /
• 제65권1호
• /
• pp.47-52
• /
• 2016

Fault location identification in the transmission line is an essential part of quick service restoration for maintaining a stable in power system. The application of digital schemes to protection IEDs has led to the development of digital fault locators. Normally, the impedance measurement had been used to for the location detection of transmission line faults. It is well known that the most accurate fault location scheme uses two-ended measurements. This paper deals with the complete design of a fault locator using GPS time-synchronized phasor for transmission line fault detection. The fault location algorithm uses the transmitted relaying signals from the two-ended terminal. The fault locator hardware consists of a Main Processor Unit, Analog Digital Processor Unit, Signal Interface Unit, and Power module. In this paper, sample real-time test cases using COMTRADE format of Omicron apparatus are included. We can see that the implemented fault locator identified all the test faults.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 추계학술대회 논문집
• /
• pp.304-307
• /
• 2002

High speed machining was accomplished. through the technological advances which covers the whole field of mechanical industry. But tapping have many troubles because of its complicate cutting mechanism, for example. tool damage, chip elimination and synchronization between spindle rotation and feed motion. But High speed tapping is so important that it marches in step with the flow of the times and make improvement in the productivity. In this paper we analyze mechanism of high speed synchronized tapping with the signal of tapping torque and spindle speed obtained through the newly developed high speed tapping machine(NTT-30B). We made an experiment with this machine on condition of various speed from 1000rpm to 10000rpm. As one complete thread is performed through the whole chamfer cutting, cutting torque increases highly in chamfer cutting, but smoothly in full thread cutting functioning of the threads guide. And the size of cutting torque according to spindle speed(rpm) was not enough of a difference to be conspicuous.

• 한국통신학회논문지
• /
• 제37권5B호
• /
• pp.338-347
• /
• 2012

본 논문에서는 OFDMA 기반의 기업형 펨토셀 네트워크 환경에서 펨토셀의 성능 향상을 위한 협력 통신 기법(cooperative transmission scheme; CTS)을 제안한다. 제안된 알고리즘에서 UE(user equipment)는 현재 접속 중인 fBS(serving femtocell base station)에서 뿐만 아니라 주변 fBS에서 원하는 신호(desired signal)를 받게 된다. 따라서 UE는 동기화된 두 개의 신호에 의해 향상된 신호 대 간섭 잡음 비(SINR)를 얻게 된다. 알고리즘의 성능 평가를 위해 콜 레벨 QoS(quality of service)와 패킷 레벨 QoS를 성능 지표로 나타낸다. 먼저 다양한 offered load에서 하향 링크 자원에 대한 호 차단 확률과 자원 사용률을 측정한다. 그리고 측정된 값을 사용하여 시스템의 outage 확률과 시스템 처리량(effective throughput)을 시뮬레이션 한다. 시뮬레이션 결과를 통해 제안된 알고리즘이 기존 시스템에 비해 시스템 처리량에서 향상된 성능을 가짐을 보인다.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2006년도 International Symposium on GPS/GNSS Vol.1
• /
• pp.309-314
• /
• 2006

In general DGPS system, the correction message is transferred to users by wireless modem. To cover wide area, many DGPS station should be needed. And DGPS users must have a wireless modem that is not necessary in standalone GPS. But SBAS users don't need a wireless modem to receive DGPS corrections because SBAS correction message is transmitted from the GEO satellite by L1 frequency band. SBAS signal is generated in the GUS(Geo Uplink Subsystem) and uplink to the GEO satellite. This uplink transmission process causes two problems that are not existed in GPS. The one is a time delay in the uplink signal. The other is an ionospheric problem on uplink signal, code delay and carrier phase advance. These two problems cause ranging error to user. Another critical ranging error factor is clock synchronization. SBAS reference clock must be synchronized with GPS clock for an accurate ranging service. The time delay can be removed by close loop control. We propose uplink ionospheric error correcting algorithm for C/A code and carrier. As a result, the ranging accuracy increased high. To synchronize SBAS reference clock with GPS clock, I reviewed synchronization algorithm. And I modified it because the algorithm didn't consider doppler that caused by satellites' dynamics. SBAS reference clock synchronized with GPS clock in high accuracy by modified algorithm. We think that this paper will contribute to basic research for constructing satellite based DGPS system.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2004년도 춘계학술대회논문집
• /
• pp.495-498
• /
• 2004

In the sound insulation measurements, the influence of background (extraneous) noise is often serious problem and how to reduce its effect and to improve the signal-to-noise(S/N) ratio is an important theme. As the background noise, such extraneous noises as road traffic noise and machine noise often disturb the measurement. In laboratory measurements on specimens with high sound insulation performances, even the internal noise of the measurement system can become a problem. To improve the signal-to-noise ratio and to improve the measurement accuracy, various kinds of digital signal processing techniques can be applied. In this paper, four kinds of digital signal processing techniques are applied and their effectiveness is examined by a simple sound insulation measurement.

• 제어로봇시스템학회논문지
• /
• 제14권9호
• /
• pp.963-968
• /
• 2008

A new method to deal with GPS indoor positioning by means of time synchronized switching GPS repeater has been developed by authors[1]. But the developed indoor positioning system has problems. Therefore, we proposed a method for indoor positioning using GNSS Repeater-Assisted. To solve the 3-dimensional user's position, the 4 or more retransmission antennas are needed in the previously proposed methods. If a GPS repeater periodically transmits the signal like as pseudollite, the information for assisting an acquisition and tracking can be informed to receiver. Then, the user position can be calculated using the induced weak signal. The advantage of the proposed algorithm is use of only 1 re-transmission antenna because the re-transmitted signal are not used for positioning but used for assisting an acquisition and tracking weak signals induced indoor. We analyze the propose algorithms through the experiment and performed the test of feasibility.

• 전력전자학회논문지
• /
• 제15권3호
• /
• pp.252-258
• /
• 2010

레졸버에 의한 속도 측정과 PWM 신호 발생을 하나의 마이크로콘트롤러를 이용하여 동시에 구현하면 시스템 비용을 줄일수 있을 뿐만 아니라 인버터의 스위칭 노이즈를 회피하는 것이 용이하다. 스위칭 노이즈를 회피하면서 동시에 속도측정 정밀도를 높이기 위하여 PWM 스위칭과 레졸버 신호의 A/D 변환 시점이 동기되어야 한다. 본 연구에서는 레졸버 여자신호의 위상을 단계적으로 변화시키면서 레졸버 출력신호를 측정하고, 측정된 데이터로부터 최소자승근사법을 이용하여 레졸버 여자신호의 최적 위상을 추정하였다.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제55권3호
• /
• pp.138-141
• /
• 2006

Blood flow is one of vital signals related to human physiological information. Photoplethysmograph (PPG) has been used to measure indirectly heart rate, blood oxygen saturation ($SpO_2$), and so on. Because PPG signal is weak and sensitive to motion artifacts, it is very important to continuously obtain stable PPG signal during free movement. In this study, we applied the scaled Fourier linear combiner (SFLC) using both the adaptive filter and FLC to remove effectively the motion artifacts as well as background noise in the real time without additional signal correlated with motion from a accelerometer. The proposed method would be useful to reduce the movement and background noise which are not synchronized with heart rate.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2004년도 추계학술대회논문집
• /
• pp.441-444
• /
• 2004

In the sound insulation measurements, the influence of background (extraneous) noise is often serious problem and how to reduce its effect and to improve the signal-to-noise(S/N) ratio is an important theme. As the background noise, such extraneous noises as road traffic noise and machine noise often disturb the measurement. In laboratory measurements on specimens with high sound insulation performances, even the internal noise of the measurement system can become a problem. To improve the signal-to-noise ratio and to improve the measurement accuracy, various kinds of digital signal processing techniques can be applied. In this paper, four kinds of digital signal processing techniques are applied and their effectiveness is examined through field measurements.