• Journal of Electrical Engineering and Technology
• /
• 제8권3호
• /
• pp.472-477
• /
• 2013

An internet-based, real-time GPS synchronized wide-area power system frequency monitoring network(FNET) has been monitoring wide-area power system frequency in continuous time in the United States. This paper analyzes the FNET measurement to the verified disturbances in the US eastern interconnected power system and simulates it using the dynamic system model. By comparing the frequency measurements with its simulation results to the same disturbances in detail, this paper finds that the sequence of monitoring points to detect the frequency fluctuation caused by the disturbances is matched well in the measured data and the simulation results. The similarity comparison index is also proposed to quantify the similarity of the compared cases. The dynamic model based simulation result is expected to compensate for the lack of FNET measurement in its applications.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2003년도 추계종합학술대회
• /
• pp.394-397
• /
• 2003

최근의 system 내에서 동작속도가 급속히 증가함에 따라 단일 chip 내에서도 각부분의 clock 동기의 필요성이 요구되고 있다. 이러한 요구를 만족시키기 위해 PLL (Phase Locked Loop) 흑은 DLL (Delay Locked Loop)과 같은 clock를 동기 시켜 주는 회로가 사용되고 있다. PLL 내에서 주파수를 발생시키는 VCO (Voltage Controled Oscillator)는 jitter의 축적과 higher order system으로 인한 unstable한 특성과 설계하기 어렵다는 단점이 있다. 반면에 DLL에서 사용되는 VCDL (Voltage Controled Delay Line)은 first order system으로 동작이 stable하고 설계하기 쉬우며, no jitter의 장점을 가지고 있다. 본 연구에서는 기존의 VCDL의 단점을 개선하여 보다 안정적인 동작을 하는 VCDL을 제안하고자 한다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1998년도 Proceedings ICPE 98 1998 International Conference on Power Electronics
• /
• pp.547-553
• /
• 1998

In this paper, we composed of utility interactive pv generation system of voltage source inverter, and represented uninterrutible power supply (UPS) equipment maintaining constant voltage, using a pulse width modulation(PWM) voltage fed inverter, as power source disconnection, voltage variation and output current variation with load variation. This system is driven by being synchronized voltage fed inverter and AC source, and in the steady state of power source charge battery connected to dc side with solar cell using a photovoltaic (PV) that it was so called constant voltage charge. In addition, better output waveform was generated because of PWM method, and it was proved to test by experiment maintained constant output voltage regardless of AC source disconnection, load variation, and voltage variation of AC power source.

• 제어로봇시스템학회논문지
• /
• 제16권3호
• /
• pp.286-292
• /
• 2010

In this paper, we investigate the relationship between the performance of telerobotic systems and the two independent time-delay on different modality, which are haptic and video. Especially, we try to find some performance improvement when the amount of delay of haptic and video is synchronized. Experiments were conducted with 10 subjects by scanning the amount of video and haptic delay independently. It is rather interesting to note that the teleoperation performance was not that sensitive to video delay, and the synchronized video and haptic delay doesn't show better performance than the case when haptic delay is lower than video delay.

• 한국동물학회지
• /
• 제19권3호
• /
• pp.113-122
• /
• 1976

非同時化시킨 HeLa $S_3$ 細胞에 있어 MMS에 의한 $^3 H$-Thymidine Uptake率은 MMS의 頻度증가에 따라 직선적으로 감소하며, BUdR 혹은 IUdR과 二重處理할 경우 그 감소율은 더욱 증가한다. MMS에 의한 $^3 H$-Thymidine Uptake은 thymidine 二重 處理후 얻은 同時化된 HeLa $S_3$ 細胞의 $G_2$ 時期에서 檢出된다. BUdR과 IUdR은 MMS에 의한 $^3 H$-Thymidine Uptake率을 더욱 증가시키며 IUdR은 BUdR에 비해 더효과적인 感受性 物質로 판명되었다.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제15권3호
• /
• pp.319-325
• /
• 2015

This paper presents an efficient vibration energy harvester with a piezoelectric (PE) cantilever. The proposed PE energy harvester increases the efficiency through minimization of hardware complexity and hence reduction of power dissipation of the circuit. Two key features of the proposed energy harvester are (i) incorporation synchronized switches with a simple control circuit, and (ii) a feed-forward buck converter with a simple control circuit. The chip was fabricated in $0.18{\mu}m$ CMOS processing technology, and the measured results indicate that the proposed rectifier achieves the efficiency of 77%. The core area of the chip is 0.2 mm2.

• 한국정보과학회:학술대회논문집
• /
• 한국정보과학회 2001년도 봄 학술발표논문집 Vol.28 No.1 (A)
• /
• pp.142-144
• /
• 2001

인터넷과 통합된 멀티미디어 기술의 발전 및 초고속 통신망의 보편적인 사용으로 인해 유기적으로 통합된 멀티미디어 컨텐츠에 대한 웹 서비스의 필요성이 대두되었다. 이에 따라 1998년 W3C(World Wide Web Consortium)에서 제안된 XML(eXtensible markup Language) 기반의 통합 멀티미디어 표현 언어인 SMIL(Synchronized Multimedia Integration Language) 1.0이 발표되었고, 기능이 확장되어 2000년 9월 SMIL 2.0으로 최종 Working Draft안이 발표되었다. 본 논문에서는 웹 컨텐츠 제공자 및 개인 사용자에게 SMIL 컨텐츠 저작을 위한 자동 생성 모듈 및 전용 저작 도구를 제공하고, SMIL 컨텐츠 데이터베이스 서버 및 재생기와의 통합으로 원활한 SMIL 컨텐츠 서비스 환경을 제공하는 통합 멀티미디어 시스템의 설계 및 구현을 제시하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 하계학술대회 논문집 B
• /
• pp.1229-1231
• /
• 2003

We considered of the efficiency for the Buck+Half bridge converter, this converter has advantages of applications for a low output voltage, a high output current and a wide input voltage. Developed the Buck+Half Bridge converter ratings are of $36{\sim}72V$ input and 3.3V/30A output. In Half Bridge converter the $86{\sim}96.4%$ of the efficiency is measured at 100kHz switching frequency with PQI core. In the case of synchronized the Buck+Half Bridge converter, the measured efficiency is higher than the unsynchronized converter. In the synchronized Buck+Half Bridge, the maximum efficiency is up to 92.3% with PQI core at 100kHz, 7A output.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2017년도 추계학술대회
• /
• pp.522-523
• /
• 2017

전류컨베이어 회로와 시간-디지털 변화기를 이용하여 아날로그-디지털 변환기를 설계하였다. 전류컨베이어 회로를 이용하여 아날로그 전압의 크기를 샘플링한 다음, 전류원을 이용하여 샘플링 전압을 방전하면서 아날로그 전압을 시간정보로 변환하였다. 시간정보는 카운터 타입의 시간-디지털 변환기를 이용하여 디지털 값으로 변환되는데 이때 변환 에러를 감소시키기 위해 시간정보 펄스와 동기화된 클록을 생성하여 사용하였다.

• 한국정밀공학회지
• /
• 제20권3호
• /
• pp.74-81
• /
• 2003

This paper introduces that the turning center optimizes main and sub spindle's synchronized controller in Open-CNC. In view of optimal design, the mathematical modeling and the frequency domain analysis of spindle's system are simulated. For the minimizing of synchronized error in each spindle's speed, the study of control method and the related control parameter is proposed. By the experiment in prototype machines using the server/client program, the validity of the proposed synchronous error's compensation method is verified.