• Magazine of the Korean Society of Agricultural Engineers
• /
• v.31 no.4
• /
• pp.81-89
• /
• 1989

This study is to determine seasonal consumptive use of water of a design year during growing period (June-September) for paddy rice in Suwon. To obtain Dry flay Index which is defined as the number of probable dry days occurring at a design year, Slade Partly Un- symmetrical Distribution Function was adopted. Dry Day Index was analysed with 5, 10 and 30 day-term. And each of them was evaluated with recurrence intervals of 1, 3, 5, 10 and 20 year using 49 years daily rainfall data('35-'83). Their singnificance were tested at 1% level by X$^2$ test. On the basis of these values, Probable Evapotranspiration (ET) which is the daily average ET for the sum of both ET on dry days and ET on rainy days were esti- mated using 5 years daily actual ET data(' 82-' 86). Their Crop Coefficients were also de- termined by the modified Penman equation(1977) proposed by Doorenbos & Pruitt.

• Korean Journal of Plant Tissue Culture
• /
• v.28 no.5
• /
• pp.263-271
• /
• 2001

Inoculated anthers of Capsicum annuum L. were subjected to 4 and 32$^{\circ}C$ pretreatment and their influence on the microspore viability, early cytological changes and the induction frequency of microspore embryo was investigated. Viability of freshly isolated microspores was between 62 and 64%. During temperature pretreatment, microspore viability showed a rapid decrease and this tendency enhanced with the 32$^{\circ}C$ pretreatment. Irrespective of temperature pretreatment, microspore viability declined to nearly zero after nine days. Before temperature pretreatment, most of the microspores in anthers were at late uninucleate stage. Several types of multinuclear microspores appeared from the 2 day after culture onwards, together with many degenerated and non-induced microspores. The 32$^{\circ}C$ pretreatment gave higher proportions of embryogenic microspore than other treatment. However, the temperature pretreatment had no clear effect on the frequencies of symmetrical binucleate rnicrospore. The multinucleate grains might originate either by symmetrical or asymmetrical division. After 2 days of pretreatment at 25 and 32$^{\circ}C$ , degenerated microspore increased above 50%. In contrast, during 4$^{\circ}C$ treatment, nucleus of most microspores remained intact for 14 days. The 32$^{\circ}C$ pretreatment produced more embryos than 4$^{\circ}C$ treatment. The most effective period of 32$^{\circ}C$ pretreatment was 4 days. In contrast, effective period of 4$^{\circ}C$ pretreatment was 2 days and longer time had deleterious effect on induction of microspore embryo.

• Korean Journal of Animal Reproduction
• /
• v.9 no.2
• /
• pp.140-147
• /
• 1985

Seventy four Holstein heifers were randomly assigned over three trials to PRID-7+PG-6 and Synchromate B-9 regimens to synchronize estrus cycle for embryo transfer. Sexual behaviors; moounting, standing, orientation, chin-resting, sniffing, licking, rubbing and butting, vaginal swelling and mucus discharge were observed between 06-08, 12-14 and 18-20 h on 1st day and 00-02, 06-08, 12-14 and 18-20 h on 2nd day after removal of hormones. Synchromate-B treatment (81.6%) showed higher synchronized estrus rate than PRID treatment (77.8%) during observation period. Standing estrus was observed within 74 h after PG injection in PRID and within 52 h after removal of implant in Synchromate-B. About 68% of heifers in PRID and 74% of heifers in Synchromate-B showed standing estrus between 0-14 h on 2nd day after removal of the hormones. Synchromate-B resulted in a tighter synchrony of standing estrus than PRID. Incidence of average mounting and standing per head during observation period was 22.3 and 16.6 in PRID and 28.1 and 13.6 in Synchromate-B. The PRID showed peak in active mounting at 18-20 h on 1st day, however, the Synchromate-B showed at 0-2 h on 2nd day after removal of hormone. Active standing was shown between 18 h on 1st day to 20h on 2nd day in PRID, however, between 0-14 h on 2nd day after removal of hormone is Synchromate-B. There was slight difference in pattern of active mounting and standing during estrus between PRID and Synchromate-B. Conception rate of synchronized heifers transferred with fresh and frozen embryos by non-surgical and surgical methods was higher in synchromate-B (62.5%) than in PRID (38.5%). Chin-resting showed highest incidence among 6 sexual behavioral components in the both treatments. Synchromate-B showed higher incidence of chin-resting (16.6) than PRID (10.7). Synchromate-B group showed also higher incidence of orientation, sniffing and butting than PRID group. Synchromate-B resulted in more active sexual behaviors than PRID. The pattern of incidence of chin-resting, licking and butting was almost symmetrical in PRID with their peak values at 6-8 h on 2nd day, however in Synchromate-B chin-resting and sniffing was symmetrical with their peak values at 12-14 h on 2nd day after removal of hormone. There was tendency to increase vaginal swelling according to time passage of synchronized estrus in the both treatments. Incidence of mucus discharge in Synchromate-B was slightly higher than in PRID. Twenty to 40% was false negative in conception rate by tall painting before re-estrus day as judged by rectal palpation.

• The Journal of the Acoustical Society of Korea
• /
• v.40 no.3
• /
• pp.192-200
• /
• 2021

Korean bell is a macroscopically axi-symmetrical structure, but has a slight asymmetry due to complex patterns and casting irregularity. Small asymmetry separates one vibration mode into a mode pair with slight frequency difference. The mode pair interferes and creates a beat. The vivid beat with an appropriate period makes the bell sound magnificent and lively feeling. In this study, we propose a method to make the vivid beat using artificial dumshoi. This method creates the vivid beat by designing artificial dumshoi that overwhelms the bell asymmetry. To this end, the asymmetry of Korean bell is quantified by analyzing the beat period data of a number of Korean bells cast in modern times. Based on the measured beat period data, the magnitude of asymmetry is quantified using an equivalent bell model and artificial dumshoi is applied. The movement of mode pair by dumshoi is predicted through finite element analysis. Finally, a design example of the artificial dumshoi for clear beat is introduced.

• Transactions on Electrical and Electronic Materials
• /
• v.7 no.1
• /
• pp.36-41
• /
• 2006

In this paper, the time evolution of undoped GaN epilayers on a low-temperature GaN buffer layer grown on c-plane sapphire at a low pressure of 300 Torr was studied via a two-step growth condition in a horizontal MOCVD reactor. As a function of the growth time at a high-temperature, the surface morphology, structural quality, and optical and electrical properties were investigated using atomic force microscopy, high-resolution x-ray diffraction, photoluminescence, and Hall effect measurement, respectively. The root-mean-square roughness showed a drastic decrease after a certain period of surface roughening probably due to the initial island growth. The surface morphology also showed the island coalescence and the subsequent suppression of three-dimensional island nucleation. The structural quality of the GaN epilayer was improved with increasing growth time considering the symmetrical (002) and asymmetrical (102) rocking curves. The variations of room-temperature photoluminescence, background carrier concentration, and Hall mobility were measured and discussed.

• Journal of Power Electronics
• /
• v.16 no.4
• /
• pp.1306-1315
• /
• 2016

Modern power systems driven by high-power converters have become inevitable in view of the ever increasing demand for electric power. The total power loss can be reduced by limiting the switching losses in such power converters; increased power efficiency can thus be achieved. A reduced switching frequency that is less than a few hundreds of hertz is applied to power converters that produce output waveforms with high distortion. Selective harmonic elimination pulse width modulation (SHEPWM) is an optimized low switching frequency pulse width modulation method that is based on offline estimation. This method can pre-program the harmonic profile of the output waveform over a range of modulation indices to eliminate low-order harmonics. In this paper, a SHEPWM scheme for three-phase three-leg neutral point clamped inverter is proposed. Aside from eliminating the selected harmonics, the DC capacitor voltages at the DC bus are also balanced because of the symmetrical pulse pattern over a quarter cycle of the period. The technique utilized in the estimation of switching angles involves the firefly algorithm (FA). Compared with other techniques, FA is more robust and entails less computation time. Simulation in the MATLAB/SIMULINK environment and experimental verification in the very large scale integration platform with Spartan 6A DSP are performed to prove the validity of the proposed technique.

• Archives of Plastic Surgery
• /
• v.45 no.5
• /
• pp.484-489
• /
• 2018

Large and ptotic breast reconstruction in patients who are not candidates for a transverse rectus abdominalis myocutaneous flap and revision surgery for the contralateral breast remains challenging. We developed a novel breast reconstruction technique using a latissimus dorsi myocutaneous (LD m-c) flap set at the posterior aspect of the reconstructed breast, combined with an anatomical silicone breast implant (SBI), following tissue expander surgery. We performed the proposed technique in four patients, in whom the weight of the resected tissue during mastectomy was >500 g and the depth of the inframammary fold (IMF) was >3 cm. After over-expansion of the lower portion of the skin envelope by a tissue expander, the LD m-c flap was transferred to cover the lower portion of the breast defect and to achieve a ptotic contour, with the skin paddle set at the posterior aspect of the reconstructed breast. An SBI was then placed in the rest of the breast defect after setting the LD m-c flap. No major complications were observed during the follow-up period. The proposed technique resulted in symmetrical and aesthetically satisfactory breasts with deep IMFs, which allowed proper fitting of the brassiere, following large and ptotic breast reconstruction.

• Archives of Plastic Surgery
• /
• v.35 no.5
• /
• pp.545-552
• /
• 2008

Purpose: The transaxillary approach for breast augmentation has been advocated for patients and surgeons for several decades. However, this blind technique had many disadvantages including, traumatic dissection, difficult hemostasis, displacement of implants, and ill-defined asymmetrical location of inframammary crease. In the present study, the precise endoscopic electrocautery dissection was applied to eliminate the limits of blunt dissection throughout the procedures. Methods: From December 2006 to December 2007, a total of 103 patients with an average age of 29.5 years underwent endoscopic assisted transaxillary dual plane augmentation mammoplasty. The mean implant size was 243 cc with the range between 150 and 350 cc. Through a 4 cm axillary incision, electrocautery dissection for submuscular pockets was carried out under the endoscopic control. The costal origin of pectoralis muscle was completely divided to expose subcutaneous tissue and to make type I dual plane. Results: Using the endoscopic dissection, we achieved good aesthetic results including a short recovery period, less morbidity, and symmetrical well-defined inframammary crease. Type I dual plane procedure could support the consistent inframammary fold shape and be applied to most patients without breast ptosis. Minor complications did not occur, however, four major complications of capsular contracture occurred. Conclusion: In contrast to the era of the blind techniques, endoscopic assisted transaxillary dual plane breast augmentation can now be performed effectively and reproducibly. With Its advantage, the axillary application of endoscopy for augmentation mammaplasty is useful to achieve the optimal cosmetic outcomes.

• Journal of Chest Surgery
• /
• v.25 no.3
• /
• pp.276-282
• /
• 1992

From Jan. 1981 to Dec. 1989 eleven cases of Funnel Chest, ten were males and one was female, were underwent an operation at the Department of Thoracic and Cardiovascular Surgery. Cheonbuk National University Hospital. The age of patients ranged from 3 to 29 years old. They all had symptoms of feeling inferiority about chest deformity. The degree of concavity on the funnel chest varied in extent, and the severity which was measured by water volume filled into it varied from 20 ml to 140 ml. Nine patients were corrected by Ravitch method and two patients were corrected by the Modified sternal turnover method. The Ravitch method was more effective in asymmetrical, severe depression deformity and in children. On the other hand the Modified sternal turnover method with preservation of vascular supply of repair was more simple and more effective in case of relatively less severe, wide symmetrical depression deformity of the chest and in case of associated with congenital or acquired heart disease and disease of the ascending aorta. This method has the advantage of maintaining chest wall stability in postoperative period.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.17 no.4
• /
• pp.187-192
• /
• 2017

Rigorous longitudinal modal transmission-line theory (L-MTLT) is applied to analyze maximum power transfer in asymmetric grating-assisted directional couplers(A-GADC). By defining a coupling efficiency amenable to rigorous analytical solutions and interference between symmetric and asymmetric supermodes, the power exchange of TE modes as a function of propagation distance is numerically evaluated. The numerical result reveals that maximum power transfer occurs at a grating period ${\Lambda}_{eq}$, in which the insertion loss of supermodes is equal to each other. That is, it is generally different from conventional phase-matching condition of GADC. Furthermore, as the asymmetric profile of grating change to symmetrical profile, the coupling length decreases and the coupling efficiency for power transmission increases.