• 전기전자학회논문지
• /
• 제19권2호
• /
• pp.260-264
• /
• 2015

본 논문에서는 부하전류를 감지하여 스위칭 방식과 선형 방식의 레귤레이터를 동작하기 위한 mode selector를 제안한다. 제안된 mode selector는 선형 방식과 스위칭 방식으로의 모드 전환이 가능하며, 경부하 조건에서 낮은 효율을 갖는 스위칭 방식의 레귤레이터의 단점을 보완하고자 제안되었다. 경부하 조건에서는 선형 방식의 레귤레이터로 mode를 전환함으로써 경부하 상태에서도 높은 효율을 제공할 수 있다. 설계한 mode selector는 동부 하이텍의 $0.18{\mu}m$ CMOS 공정을 이용하였다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2001년도 Proceedings ICPE 01 2001 International Conference on Power Electronics
• /
• pp.212-216
• /
• 2001

Because conventional switching converters have been usually using unbalanced circuit topologies, parasitic capacitance between the drain/collector of an active switch and the frame ground through its heat sink may generate the common-mode conducted noise. We have proposed a balanced switching converter circuit, which is an effective way to reduce the common-mode conducted noise. As an example, a boost converter version of the balanced switching converter was presented and the mechanism of the common-mode noise reduction was explained using equivalent circuits. This paper extends the concept of the balanced switching converter circuit and presents a buck-boost converter version of the balanced switching converter. The feature of common-mode noise reduction is confirmed by experimental results and the mechanism of the common-mode noise reduction is explained using equivalent circuits.

• Journal of Power Electronics
• /
• 제2권2호
• /
• pp.139-145
• /
• 2002

Because conventional switching converters have been usually using unbalanced circuit topologies, parasitice between the drain/collertor of an active switch and frame ground through its heat sink may generate the commom-mode conducted noise. We have proposed a balanced switching converter circuit, whitch is an effective way to reduce the commom-mode converter version of the balanced switching converter was presented and the mechanism of the commom-mode noise reduction was explained using equivalent circuits. This paper extends the concept of the balanced switch converter circuit and presents a buck-boost converter version of the blanced switching converter. The feature of common-mode niose reduction is confirmed by experimental resuits and the mechanisem of the commom-mode niose reduction is explained using equivalent circuits.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1998년도 연구회 합동 학술발표회 논문집
• /
• pp.44-48
• /
• 1998

In the buck-boost DC-DC converter which is used at a certain situation such as in factories where loads often change a lot, the switches in the device make big energy loss in operating at Buck-Boost Mode due to hard switching and are affected by lots of stresses which decrease the efficiency rate of the converter. In order to improve this problem, to decrease the loss of snubber and switching, it has been investigated that zero voltage switching mode and zero current switching mode which make the operation of switches with soft switching. For the more sophisticated and advanced device, this paper is presented the Partial Resonant Soft Switching Mode Power Converter which is adapted the power converter having the partial resonant soft switching mode, that makes switches operate when the resonant current or voltage becomes zero by making the resonant circuit partially at turning on and off of the switches with suitable layout of the resonant elements and switch elements in the converter. Also, this paper includes the analysis and simulation of the Partial Resonant type Buck-Boost Chopper.

• 한국연소학회지
• /
• 제16권3호
• /
• pp.12-20
• /
• 2011

Oxy-coal combustion for $CO_2$ capture in coal power plants entails a mode switching from air-firing to oxyfiring. In this study, procedure of the mode switching was investigated and discussed through experiments in pilot scale facilities: (1) a 0.3 $MW_{th}$ furnace with a vertical single burner and a FGR(Flue Gas Recirculation) system (2) a 1 $MW_{th}$ furnace with horizontal 4 burners and a FGR system. Principle of the mode switching was established and performed with control of FD fan, FGR fan, ID fan and oxygen flow rates. We have found that equivalence ratio in the oxy-firing mode should be increased more than that in the air-firing to achieve stable mode switching. Control of FD, ID and FGR fans should be performed carefully in the mode switching, in the sense of complete combustion and flame attachment. Moisture contents in the ash and the flue gas recycled to the primary oxidizer stream should be removed to prevent condensation, corrosion and duct clogging.

• 대한의용생체공학회:의공학회지
• /
• 제16권3호
• /
• pp.265-270
• /
• 1995

An implementation scheme of the magnetic nerve stimulator using a switching mode power supply is proposed. By using a switching mode power supply rather than a conventional linear power supply for chArging high voltage cApacitors, the weight and size of the magnetic net've stimulator can be considerably reduced. Maximum output voltage of the developed magnetic nerve stimulator using the switching mode power supply is 3,000 volts and switching time is about 100 msec Experimental results of human nerve stimulations using the developed stimulator are presented.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 학술대회 논문집 정보 및 제어부문
• /
• pp.735-737
• /
• 2004

This paper proposes a method of fault diagnostics on switching mode power supply. When the error of switching mode power supply cannot be found when the conventional diagnostics is performed, this proposed method first performs diagnosis on the switching mode power supply strictly to judge the operating condition. This method analyzes the PWM wave which depends on the load change, to make sure the feedback control of the power supply to diagnosis the operation of the power supply system.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2003년도 International Meeting on Information Display
• /
• pp.1092-1095
• /
• 2003

A driving mechanism and excellent features for an in-plane switching twisted nematic liquid crystal mode (IT mode) that could possibly improve the viewing-angle and color shift characteristics and the cell gap error tolerance is proposed. .It is important that the surface azimuthal anchoring strength of the liquid crystal cell differs at the upper and lower substrates. Furthermore. as a rubbing-free LCD. amorphously aligned in-plane switching twisted nematic mode (a-IT mode) is also demonstrated.

• 대한전자공학회논문지SD
• /
• 제41권8호
• /
• pp.59-65
• /
• 2004

본 논문에서는 IT(In-plane switching foisted nematic) 모드를 기반으로 광 투과 특성을 개선시킨 Pseudo-TN IPS(Pseudo-Twisted Nematic In-Plane Switching) 모드를 새롭게 제안하고 그 광 투과 특성을 분석하였다. PTN-IPS 모드의 경우 개구율을 향상시켜 투과율 면적을 향상시킴으로써 종래의 IT 모드보다 약 25%정도의 높은 광 투과 특성을 나타내었으며, 전압인가에 따른 광 투과율의 변화가 선형적이므로, 광 투과율 조절을 위한 액정의 제어가 IT 모드에 비해 용이함을 확인하였다. 또한, IT 모드에 비해 수평방향 대비비는 약 8%정도 특성이 열화 되었으나 수직 방향에 있어서는 약 20%이상의 특성개선을 확인 할 수 있었다. 이와 더불어, 기존 IT 모드가 가지고 있는 샐 갭에 대한 특성 및 장점을 가지고 있어, 차세대 액정 셀을 개발하는데 유용하게 사용될 것이라 생각된다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 F
• /
• pp.2036-2038
• /
• 1998

In the buck-boost DC-DC chopper which is used at a certain situation such as in factories where loads often change a lot, the switches in the device make big energy loss in operating at Buck-Boost Mode due to hard switching and are affected by lots of stresses which decrease the efficiency rate of the converter. In order to improve this problem, to decrease the loss of snubber and switching, it has been investigated that zero voltage switching mode and zero current switching mode which make the operation of switches with soft switching. For the more sophisticated and advanced device, this paper is presented the Partial Resonant Soft Switching Mode Power Converter which is adapted the power converter having the partial resonant soft switching mode, that makes switches operate when the resonant current or voltage becomes zero by making the resonant circuit partially at turning on and off of the switches with suitable layout of the resonant elements and switch elements in the converter. Also, this paper includes the analysis and simulation of the Partial Resonant type Buck-Boost Chopper.