• Journal of Power Electronics
• /
• 제17권1호
• /
• pp.200-211
• /
• 2017

Conventional boost-full-bridge and boost-hybrid-bridge two-stage inverters are widely applied in order to adapt to the wide dc input voltage range of photovoltaic arrays. However, the efficiency of the conventional topology is not fully optimized because additional switching losses are generated in the voltage conversion so that the input voltage rises and then falls. Moreover, the electrolytic capacitors in a dc-link lead to a larger volume combined with increases in both weight and cost. This paper proposes a higher efficiency inverter with time-sharing synchronous modulation. The energy transmission paths, wheeling branches and switching losses for the high-frequency switches are optimized so that the overall efficiency is greatly improved. In this paper, a contrastive analysis of the component losses for the conventional and proposed inverter topologies is carried out in MATLAB. Finally, the high-efficiency under different switching frequencies and different input voltages is verified by a 3 kW prototype.

• 조명전기설비학회논문지
• /
• 제23권5호
• /
• pp.101-109
• /
• 2009

본 논문에서는 변압비가 다른 2개의 삼상 변압기를 이용한 새로운 방식의 cascade 3상 IHCML(Isolated H-bridge Cascade Multi-Level) 인버터 및 제어 방식을 제안한다. 또한 cascade 3상 IHCML 인버터를 제어하기 위해 최근접 벡터를 이용한 벡터제어 기법을 사용하였다. 이로 인해 많은 전력을 담당하는 대용량 H-bridge의 스위칭 주파수는 출력 기본주파수와 거의 동일하여 제어 스위치 손실이 작으며, 작은 전력을 담당하는 저용량 H-bridge의 스위칭 주파수는 높게 제어 하므로 출력전압의 품질이 향상되었다.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제53권1호
• /
• pp.47-54
• /
• 2004

A new high voltage DC power supply is proposed. The proposed power supply is constructed with several power converters connected in series. It is easy to obtain high DC voltage for the same structure of each power converter. The output DC power of the proposed power supply can be disconnected from the load within several hundred microseconds at the instant of a load short-circuit fault. The rising time of the output DC voltage is also as small as several hundred microseconds, and there is no overshoot of the voltage because all of the output filter capacitors keep undischarged state even in load short-circuit condition. Therefore, the proposed scheme is suitable for the protection of frequent output short-circuit and fast on/off switching of output DC voltage. The proposed power supply has improved features such as simple structure, high power factor, and reduced size and volume compared with the conventional schemes. The operating principle is described and the validity of the proposed scheme is proved through simulations and experiments.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2003년도 통신소사이어티 추계학술대회논문집
• /
• pp.353-356
• /
• 2003

As the wireless mobile telecommunication system has been developed with astonishment, its offering service has also widely been expanded including various data service. Currently, the wireless mobile telecommunication network presents voice service that covers for the most part of the whole service areas. For this reason, the availability of the switching capacity in the mobile switching center(MSC) is manipulated by the required volume of voice service. However, considering the increase of data service, it is desirable for the current switching method to be modified for more efficiency. In this Paper, we analyze the data traffic caused by providing data service in the wireless mobile telecommunication network. For this, we are firstly going to review the result of the analysis in the feature of the data traffic. Secondly, based on the review, we are also going to perform analyzing the other feature of the data traffic normally generated in the wireless mobile telecommunication network. We expect that this paper would be utilized as an elementary source for the feature of the SMS data .traffic and it will be an honour for ourselves to work on it.

• 항공우주시스템공학회지
• /
• 제15권1호
• /
• pp.32-39
• /
• 2021

전기추진 항공기는 기존 가스터빈 엔진에 의한 환경 및 소음 문제를 해결하기 위해 최근 항공분야에서 활발히 연구가 진행되고 있다. 특히 전기 동력추진 시스템의 핵심 구성품인 추력 모터와 이를 구동하기 위한 인버터에 대한 연구가 활발히 진행되고 있다. 이에 본 논문에서는 무게와 부피에 민감한 항공기 특성에 맞는 비출력이 높은 모터를 선정하고, 전력 소자에 따른 인버터 전력 손실을 시뮬레이션 하였다. 시뮬레이션은 전력전자 분석 툴인 PSIM을 이용하여 선정된 모터와 전력 소자를 모델링하여 스위칭 주파수에 따른 인버터 전력 손실을 분석 하였다.

• 조명전기설비학회논문지
• /
• 제29권6호
• /
• pp.96-108
• /
• 2015

his study deals with a power conversion unit of an anti-start air conditioner compressor system for the commercial vehicle. In case of converter, to reduce the switching losses and current stresses of the device, applies LLC resonant topology. Transformer leakage inductance in the full-bridge converter is used for making the resonance with the capacitor of the voltage-doubler. Through this method we can increase power and decrease volume of system. Both circuit analysis and design guideline are described. So in this paper, power conversion unit is designed. 2.5kW anti-start air conditioner compressor system was implemented, and system operation and stability was verified through experiment.

• 유공압시스템학회논문집
• /
• 제4권4호
• /
• pp.8-14
• /
• 2007

The electro-hydraulic pump is usually used in testing equipments which require one control function. But until now, it is not applied to industrial equipments which are exposed to severe working environment and require various control functions. This paper proposes a technique which controls continuously flow, pressure and power by utilizing switching control mode. Mathematical model is developed from the continuity equation for the pressurized control volume and the torque balance for the swash plate motion. To simplify the model we make the linear state equation by differentiating the nonlinear model. We analyze the stability and disturbance by using the state variable model. Finally, we review the control performances of flow, pressure and power by tests using PID controller.

• ETRI Journal
• /
• 제20권4호
• /
• pp.380-394
• /
• 1998

A numerical study has been performed to predict the characteristics on the transient operation of the heat pipe with multiple heaters for electronic cooling. The model of the heat pipe was composed of the evaporator section with four heaters, insulated transport section, and the condensor section with a conductor which is cooled with uniform heat flux condition to surrounding. The governing equations and the boundary conditions were solved by the generalized PHOENICS computational code employing the finite volume method. Two test cases are investigated in present study; Case 1 indicates that the 1st and 2nd heaters among four heating sources are heated off, while the 3rd and 4th heaters are heated on. Case 2 is the inverse situation switched from heating location of Case 1. The results show that the transient time to reach the steady state is shorter for Case 1 than for Case 2. Especially, the temperature difference of the heater during switching operation is relatively small compared to the maximum allowable operating temperature difference in electronic system. Hence, it is predicted that the heat pipe in present study operates with thermally good reliability even for switching the heaters.

• 전력전자학회논문지
• /
• 제19권6호
• /
• pp.557-563
• /
• 2014

This study deals with a resonant converter of an anti-start air conditioner compressor for commercial vehicles. The anti-start air conditioner compressor must generally have a high current, high efficiency, a low volume, and a low weight. To reduce the switching losses and voltage and current stresses of the device, the anti-start air conditioner compressor applies the full-bridge L-C resonant converter topology. Hardware parameters are designed to have a wide voltage range, and the switching frequency range of the L-C resonant converter is determined. Simulation is implemented using PSIM and an experiment is performed to verify the proposed converter.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 하계종합학술대회 논문집(1)
• /
• pp.409-412
• /
• 2002

The software complexity model makes an estimated of the product software. For a practice of software managed, need to guideline of the static analysis. Especially, Software complexity model introduced for the estimation of software quantity. In case of measurement the software matrices, its need for us to analysis of software qualify and products. In this paper, we represent that the analysis of function point, control structure and interface, volume matrices in various aspect of switching software. Others, their results utilized similar of project and system development.