• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제48권8호
• /
• pp.440-447
• /
• 1999

This paper proposes a control method for three-phase PWM rectifier with only single current sensor in DC link side. A PWM modulation strategy for reconstructing three phase currents from the DC link current is given. The states of the retifier switch are modified so that all phase currents can be reconstructed in a switching period although one or two of active vectors is applied only for a short time. Therefore, a new current control using an adjustment scheme of the modulation signal for three-phase PWM rectifier will be discussed, and verified the experimental results.

• 대한전기학회논문지
• /
• 제41권8호
• /
• pp.883-892
• /
• 1992

In order to remove the assumption of full state availability which is one of the major difficulties with the practical realization of variable structure control system (VSCS), an output feedback variable structure control scheme for multivariable systems is proposed. The proposed output feedback VSCS is composed of a switching surfaces with dynamic structure and a new output feedback control input that can be constructed by using conventional output feedback control input design methodologies. With the proposed scheme, the practical realization of VSCS for the systems with unmeasurable states and for high order systems that conventional schemes cannot be applied is possible. Simulation results show that proposed scheme is a viable method to achieve the desired control performance, for example, good transient response, robustness against process parameter variations and external disturbance without measuring all the state variables.

• E2M - 전기 전자와 첨단 소재
• /
• 제7권3호
• /
• pp.213-219
• /
• 1994

Cu compensated Si doped GaAs (GaAs :Si:Cu has been chosen as the switch material. The GaAs material has been characterized by DLTS(Deep Level Transient Spectroscopy) technique and the obtained data were used in the computer simulation. Simulation studies are performed on several GaAs switch systems, composed of different densities of Cu, to investigate the influence of deep traps in the switch systems. The computed results demonstrates important aspect of the switch, the existence of two stable states and fast optical quenching. An important parameter optimum Cu density for the switch are also determined.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 하계학술대회 논문집 B
• /
• pp.757-759
• /
• 1996

This paper proposes an application of artificial neural networks to the bus-bar separation in a substation for radial network operation. For the effective bus-bar operation, the insecurity index of transmission line load is introduced. For the radial network operation. the constraints of bus-bar switch is formulated in the performance function with the insecurity index. The determination of bus-bar switching is to find the states of 0 or 1 in the circuit breakers. In this paper, it is tested that the bus-bar separation of binary optimization problem can be solved by Hopfield networks with adequate manipulations.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 하계학술대회 논문집 B
• /
• pp.1181-1183
• /
• 2003

Cold cathode fluorescent lamp(CCFL) are widely used to illuminate the liquid crystal display(LCD). Usually, CCFL dimming methods are used to lamp current regulation or average current adjust feeding the CCFL inverter. Switching frequency of inverter is higher than resonant frequency at stabile states. In this study, design of CCFL driving circuit by half-bridge type series and parallel resonant inverter that variable frequency modulation method to control the output power. This method has advantages such as low EMI and reduced harmonics. And it is easy to dimming control use microprocessor. The validity of this study is confirmed from the simulation and experimental results.

• Journal of Electrical Engineering and Technology
• /
• 제9권5호
• /
• pp.1569-1576
• /
• 2014

This paper mainly proposes a direct torque control strategy to minimize torque ripple in brushless DC (BLDC) motor. BLDC motor has large current and torque ripple when one voltage vector applied in one cycle due to its low inductance. Hence, this paper proposed a hysteresis torque control with PWM mode to control the resultant torque. Moreover, when the direct torque control system is operating during the two-phase half-bridge $120^{\circ}$ conduction mode, large torque ripple in commutation area appears every 120 electrical degree. Based on analyzing the root of torque ripple in detail, lookup tables of switching devices states for new half-bridge modulation mode in the positive and negative reference torque put forwarded. Finally, simulations by MATLAB software and experiment results from DSP are presented to verify the feasibility and effectiveness of the proposed strategy operating in four-quadrant operation.

• Journal of Power Electronics
• /
• 제19권5호
• /
• pp.1162-1170
• /
• 2019

Finite-control-set model predictive control (FCS-MPC) is a promising control scheme for two-level voltage-source inverters (TL-VSIs). However, two main issues arise in the classical FCS-MPC method: an exponentially-increasing computational time and a low steady-state performance. To solve these two issues, a novel FCS-MPC method has been proposed for n-phase TL-VSIs in this paper. The basic idea of the proposed method is to carry out the FCS-MPC scheme of TL-VSIs for one leg by one leg, like a "pipeline". Based on this idea, the calculations are reduced from exponential time to linear time and its current waveforms are improved by applying more switching states per sampling period. The cases of three-phase and five-phase TL-VSIs were tested to verify the effectiveness of proposed method.

• 전력전자학회논문지
• /
• 제24권4호
• /
• pp.229-236
• /
• 2019

This study proposes a DC-DC converter topology of solid-state transformer for low-voltage DC distribution. The proposed topology consists of a voltage balancer and bipolar DC-DC converter. The voltage and current equations are obtained on the basis of switching states to design the controller. The open-loop gain of the controller is achieved using the derived voltage and current equations. The controller gain is selected through the frequency analysis of the loop gain. The inductance and capacitance are calculated considering the voltage and current ripples. The prototype is fabricated in accordance with the designed system parameters. The proposed topology and designed controller are verified through simulation and experiment.

• 비교문화연구
• /
• 제46권
• /
• pp.85-112
• /
• 2017

미국의 제45대 대통령으로 취임한 도널드 트럼프는 선거캠페인이 시작된 이래로 '영어유일주의'를 천명해 왔다. 이 단일언어 정책은 세계화가 본격화된 1990년대 이후 미국의 인구학적, 문화적 변화에 직면하여 이민자와 다문화주의를 거부하고 토착주의를 강조하는 흐름의 연장선상에 놓여있다. 특히, 미국의 히스패닉화와 스페인어의 성장에 대한 반작용으로 백인중심의 문화와 가치를 고수하려는 시도와 연결되어 있다. 본 논문은 이러한 트럼프의 단일언어주의를 대표적인 라티나 작가인 글로리아 안살두아가 제안하는 '경계의 언어'와 대비시키면서 코드스위칭의 효과와 이중언어 공동체의 가능성을 탐구한다. "경계지대/국경"(1987)에서 안살두아는 하위언어인 스페인어를 텍스트에 포함시키며 자신의 언어적 현실을 드러냄과 동시에, 영어와 스페인어의 교차사용을 통한 번역작업을 시도한다. 다른 한편으로는 번역의 불가능성을 드러내면서 이중언어 사용의 불가피함을 암시하는 한편, 단일언어 독자들에게 타자의 언어와 문화를 이해하고 소통해야할 필요성에 대해 역설한다. 안살두아가 구현하는 '경계의 언어'는 이질적인 민족, 계급, 세대의 언어가 충돌하고 교섭하는 게임의 과정을 통해 생성된다. 고정되기보다는 계속적으로 변화하는 언어적 형태를 통해 안살두아는 단일 언어주의를 넘어서는 새로운 시각과 더불어 다양한 언어들 사이에서 대안적 소통방식의 필요성을 제기한다.

• 한국광학회지
• /
• 제22권1호
• /
• pp.23-29
• /
• 2011

쌍안정 카이랄 스플레이 네마틱 액정표시소자는 스플레이 상태와 $-\pi$ 꼬인 상태를 쌍안정 상태로 사용하는 메모리 액정표시소자이다. 셀 갭/피치의 값이 0.25일 경우 완전한 쌍안정 상태를 갖지만, $-\pi$ 꼬인 상태에서 스플레이 상태로 전이시키기 위하여 fringe 전계를 인가할 경우 픽셀영역은 전계의 왜곡에 의해서 완전한 스플레이 상태가 아니라 $-\pi$ 꼬인 상태를 부분적으로 유지하게 된다. 본 논문에서는 화소영역에서 두 안정한 상태가 공존하지 않는 $-\pi$ 꼬인 상태를 어두운 상태로 사용하는 반사형 쌍안정 카이랄 스플레이 네마틱 액정표시소자를 제안한다. 제작된 반사형 액정표시소자는 30:1의 고명암비를 나타냈으며, 응답속도는 수직전압 8 V, fringe 전압 12 V의 구동 전압으로 각각 쓰기 응답시간이 950 ms, 리셋 응답시간이 450 ms였다. 또한 제안된 셀은 +C 광학 보상 필름을 사용하여 좌우 방향에서 $180^{\circ}$의 광시야각을 나타냈다.