• The Transactions of the Korean Institute of Power Electronics
• /
• v.12 no.5
• /
• pp.394-399
• /
• 2007

In this paper, we study on a novel Buck-Boost converter of high efficiency by soft switching method. The proposed Buck-Boost converter is applied to new soft switching method in restraint of increment of switching power loss in the conventional Buck-Boost converter. The soft switching circuit is designed to modification of a energy storage inductor and a snubber circuit used by the conventional converter, and then the proposed converter is simplified. The controlling switches of the proposed converter is operated with soft switching by a partial resonance behavior. The output voltage of the converter is regulated by PWM control technique. The discontinuous mode action of current flowing into inductor makes to simplify control method and control components. The proposed Buck-Boost converter is compared with the conventional converter. Some computer simulative results and experimental results are confirmed to the validity of the analytical results.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.14 no.2
• /
• pp.120-127
• /
• 2009

This paper proposes a new Pulse Frequency Modulation(PFM)-Series Boost Capacitor(SBC) full bridge DC/DC Converter which features a high efficiency and high power density. The proposed converter controls the output voltage by varying the voltage across the series boost capacitor according to switching frequency and has no freewheeling period due to 50% fixed duty operation. As a result, its conduction loss is lower than that of the conventional phase shift full bridge converter. Moreover, ZVS of all power switches can be ensured along wide load ranges and output current ripple is very small. Therefore, it has very desirable merits such as a small output inductor, high efficiency, and improved heat generation. This paper performs a rationale and PSIM simulation of the proposed converter. Finally, experimental results from a 1.2kW(12V, 100A) prototype are presented to confirm the operation, validity and features of the proposed converter.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.18 no.2
• /
• pp.131-137
• /
• 2013

In this paper, the phase-shift full-bridge DC/DC converter with fixed-phase operation inverter is proposed. The proposed circuit consists of two full-bridge inverters which are connected in parallel. While one full-bridge inverter operates as the fixed-phase, it regulates the output voltage by adjusting the phase of the other inverter. During the normal operation period, the proposed circuit makes the less amount of conduction loss of the primary switches and secondary synchronous rectifiers, as well as the less amount of the current ripple of the output inductor, than the conventional phase-shift full-bridge DC/DC converter does. Also, it achieves high efficiency by reducing the snubber loss of the secondary synchronous rectifier. To sum up, the present inquiry analyzes the theoretical characteristics of the proposed circuit, and shows the experimental results from a prototype for 450W power supply.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.29 no.11
• /
• pp.696-701
• /
• 2016

In this study, to increase output of road piezoelectric energy harvester, it was made into rack type in which many piezoelectric materials can be installed and load transfer device of the leverage type to transfer vehicle load was made. By paving it in the road, the output characteristics depending on vehicle load and speed were evaluated. Changing vehicle load, harvester output characteristics depending on speed changes were evaluated at the interval of 10 km/h from 10 km/h to 100 km/h. Also, by making a wireless switch and sending wireless signal with output of rack type harvester, whether to receive it was evaluated by distance. It was checked that all switches work up to front-to-back 100 m from harvester.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.46 no.11
• /
• pp.16-23
• /
• 2009

A 12b 10MS/s pipelined ADC with low DC gain amplifiers is presented. The pipelined ADC using a reference scaling technique is proposed to compensate the gain error in MDACs due to a low DC gain amplifier. To minimize the performance degradation of the ADC due to amplifier offset, the proposed offset trimming circuit is employed m the first-stage MDAC amplifier. Additional reset switches are used in all MDACs to reduce the memory effect caused by the low DC gain amplifier. The measured differential and integral non-linearities of the prototype ADC with 45dB DC gain amplifiers are less than 0.7LSB and 3.1LSB, respectively. The prototype ADC is fabricated in a $0.35{\mu}m$ CMOS process and achieves 62dB SNDR and 72dB SFDR with 2.4V supply and 10MHz sampling frequency while consuming 19mW power.

• Journal of IKEEE
• /
• v.14 no.3
• /
• pp.232-235
• /
• 2010

A 60GHz active phase shifter with 65nm CMOS is presented by replacing passive switches in switched-line type phase shifter with active ones. Active-switch phase shifter is composed of active-switch blocks and passive delay network blocks. The active-switch phase shifter design is compact compare with the conventional vector-sum phase shifter. Active-switch blocks are designed to accomplish required input and output impedances whose requirements are different whether the switch is on or off. And passive delay network blocks are composed of lumped L,C instead of normal microstrip line to reduce the size of the circuit. An 1-bit phase shifter is fabricated by TSMC 65nm CMOS technology and measurement results present -4dB average insertion loss and 120 degree phase shift at 65GHz.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.40 no.1
• /
• pp.39-44
• /
• 2003

As the portable electronic equipments are developed and popularized, the batteies are more important. To prolong life of the equipments, engineers demand to have batteries of high-power density and they are used to use Li-ion batteries popularly Li-ion batteries are better than conventional batteries, Ni-cd, about power density per volume and weight, but they have a fault that discharge voltage of them goes down. In order to maximize life of the Li-ion batterries, we have to use a converter which is suitable for the characteristic of Li-ion batteries. Therefore, capacitive idling SEPIC(Single Ended Primary Inductance Converter) that is derived from the SEPIC topology is proposed as a source of the Portable low-power applications. The converter has characteristics of buck-boost porformance. Besides, that makes it possible to increase the switching frequency by partial soft commutation of power switches through adding a diode and a switch. This paper is presented the characteristics, DC voltage conversion ratio, circuits of operation modes, of the converter and it is analized and implemented.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.30 no.6 s.249
• /
• pp.670-677
• /
• 2006

Vacuum interrupters are used in various switch-gear components such as circuit breakers, distribution switches, contactors. The electrodes of a vacuum interrupter are manufactured of sinter-forged Cu-Cr material for good electrical and mechanical characteristics. Since the closing velocity is 1-2m/s and impact deformation of the electrode depends on the strain-rate at the given velocity, the dynamic material property of the sinter-forged Cu-Cr alloy is important to design the vacuum interrupter reliably and to identify the impact characteristics of a vacuum interrupter accurately. This paper is concerned with the dynamic material properties of sinter-forged Cu-Cr alloy for various strain rates. The amount of chrome is varied from 10 wt% to 30 wt% in order to investigate the influence of the chrome content on the dynamic material property. The high speed tensile test machine is utilized in order to identify the dynamic property of the Cu-Cr alloy at the intermediate strain-rate and the split Hopkinson pressure bar is used at the high strain-rate. Experimental results from both the quasi-static and the high strain-rate up to the 5000/sec are interpolated with respect to the amount of chrome in order to construct the Johnson-Cook and the modified Johnson-Cook model as the constitutive relation that should be applied to numerical simulation of the impact behavior of electrodes.

• Journal of Korea Society of Industrial Information Systems
• /
• v.17 no.1
• /
• pp.31-38
• /
• 2012

Next generation cellular applications and smart phone usage generate very heavy wireless data traffic. It becomes ineluctable for mobile network operators to have multiple core network entities such as Serving Gateway and Packet Data Network Gateway in 4G-LTE to share this high traffic generated. A typical configuration consists of multiple serving gateways behind a load-balancer which would determine which serving gateway would service a end-users'request. Such hardware is expensive, has a rigid policy set, and is a single point of failure. Another perspective of today's increasingly high data traffic is that besides it is being widely accepted that the high bandwidth L TE provides is creating bottlenecks for service providers by the increasing user bandwidth demands without creating any corresponding revenue improvements, a hidden problem that is also passively advancing on the newly emerging 4G-LTE that may need more immediate attention is the network signaling traffic, also known as the control-plane traffic that is generated by the applications developed for smartphones and tablets. With this as starting point, in this paper, we propose a solution, by a new approach considering OpenFlow switch connected to a controller, which gains flexibility in policy, costs less, and has the potential to be more robust to failure with future generations of switches. This also solves the problem of scaling the control-plane traffic that is imperative to preserve revenue and ensure customer satisfaction. Thus, with the proposed architecture with OpenFlow, mobile network operators could manipulate the traffic generated by the control-plane signaling separated from the data-plane, besides also reducing the cost in installing multiple core-network entities.

• The Journal of Society for e-Business Studies
• /
• v.7 no.1
• /
• pp.87-106
• /
• 2002

The behavioral and dynamic implications of an ERP implementation/installation are, to say the least, not well understood. Getting the switches set to enable the ERP software to go live is becoming straightforward. The really difficult part is understanding all of the dynamic interactions that accrue as a consequence. Dynamic causal and connectionist models are employed to facilitate an understanding of the dynamics and to enable control of the information-enhanced processes to take place. The connectionist model ran be analyzing (behind the scenes) the information accesses and transfers and coming If some conclusions about strong linkages that are getting established and what the behavioral implications of those new linkages and information accesses we. Ultimately, the connectionist model will come to an understanding of the dynamic, behavioral implications of the larger ERP implementation/installation per se. The underlying connectionist model will determine information transfers and workflow. Once a map of these two infrastructures is determined by the model, it becomes a relatively easy job for an analyst to suggest improvements in both. Connectionist models start with analog object structures and then use learning to produce mechanisms for managerial problem diagnoses. These mechanisms are neural models with multiple-layer structures that support continuous input/output. Based on earlier work performed and published by the author[10][11], a Connectionist ReasOning and LEarning System(CROLES) is developed that mimics the real-world reasoning infrastructure. Coupled with an explanation subsystem, this system can provide explanations as to why a particular reasoning structure behaved the way it did. Such a system operates in the backgmund, observing what is happening as every information access, every information response coming from each and every intelligent node (whether natural or artificial) operating within the ERP infrastructure is recorded and encoded. The CROLES is also able to transfer all workflows and map these onto the decision-making nodes of the organization.