• Journal of rehabilitation welfare engineering & assistive technology
• /
• v.7 no.2
• /
• pp.75-84
• /
• 2013

In this study, the patterns and characteristics according to gait cycle were analyzed using to EMG signals during walking, and analyzed in the time domain and frequency domain. The experiments was performed divide to level-ground walking and stair walking, and gait cycle was analysis by stance and swing. In the sagittal plane by using the tilt sensor measures the angle of the lower leg, and EMG was measured from the quadriceps and biceps femoris. The tilt of the lower leg was showed the biggest tilt at HS, and showed lowest value at TO. All in walking according to the gait cycle IEMG showed a specific pattern, and is expected useful to determine the gait cycle and kind. In the frequency domain analysis was using STFT on able to frequency analysis according to time, and using the tilt sensor was identify gait cycle. We analyzed also spectrum of the results of the STFT in all gait types, and recognized that stance had broad bandwidth than that of swing. Through this study, it was confirmed the possibility of judgment and analysis of the gait cycle using EMG and the tilt in the sagittal plane of the lower leg. When used it, can improve the quality of life of amputation patients

• Journal of The Korean Society of Integrative Medicine
• /
• v.2 no.3
• /
• pp.57-63
• /
• 2014

Purpose : The purpose of this study was to identify the muscle activity of leg during stair down in the subjects with flatfoot and normal foot. Methods : The fourteen subjects with the flatfoot group and the fifteen subjects with the normal foot group volunteered for this study. All subjects descended the stairs that the height was 20cm and consisted 25 stairs. The target muscles for recording muscle activity were posterior fiber of gluteus medius, vastus medialis and vastus lateralis oblique, semitendinosus and biceps femoris, tibialis anterior, and medial and lateral fiber of gastrocnemius muscles. The muscle activity was recorded using the wireless EMG system. Results : The flatfoot group had significantly lower the muscle activity of posterior fiber of gluteus medius than the normal foot group in stance phase during stair down(p<.05). The flatfoot group had significantly higher the muscle activity of biceps femoris and tibialis anterior than the normal foot group in swing phase during stair down(p<.05). Conclusions : This study proposed that the subject with flatfoot should train the strengthening exercise for posterior fiber of gluteus medius.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.43 no.5 s.311
• /
• pp.19-27
• /
• 2006

Improvement in gait stability of fault-tolerant gaits for quadruped robots is addressed in this paper. The previously developed fault-tolerant gait gives a quadruped robot the ability to continue its walk against the occurrence of a leg failure. But it has a drawback of having marginal gait stability, which may lead to tumbling when the robot body's center of gravity is perturbed. To overcome such a drawback, a novel fault-tolerant gait is presented in this paper that generates positive stability margin against a locked joint failure, in which a joint of a leg is locked in a known place. Positive stability margin is obtained by adjusting foot positions of supporting legs between leg swing sequences. The advantages of the proposed fault-tolerant gait are discussed by comparing with the previous gait in terms of gait stability, stride length and gait velocity.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.203-208
• /
• 2003

In this paper, gait generation algorithm based on Linear Inverted Pendulum Mode is extended considering that the terrain is uncertain and flexible. Deformation of the soft terrain by the weight of the biped robot is taken into account to design the desired motion of the swing leg. Landing time disagreement caused by dynamics of the robot is also considered and a method to adjust gait is proposed. Results of numerical simulation show the effectiveness of the proposed method.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.215-219
• /
• 2003

In this paper, we generate a trajectory minimized the energy gait of a biped robot for walking a staircase using genetic algorithms and apply to the computed torque controller for the stable dynamic biped locomotion. In the saggital plane, a 6 degree of freedom biped robot that model consists of seven links is used. In order to minimize the total energy efficiency, the Real-Coded Genetic Algorithm (RCGA) is used. Operators of genetic algorithms are composed of a reproduction, crossover and mutation. In order to approximate the walking gait, the each joint angle is defined as a 4-th order polynomial of which coefficients are chromosomes. Constraints are divided into equality and inequality. Firstly, equality constraints consist of position conditions at the end of stride period and each joint angle and angular velocity condition for periodic walking. On the other hand, inequality constraints include the knee joint conditions, the zero moment point conditions for the x-direction and the tip conditions of swing leg during the period of a stride for walking a staircase.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2000.05a
• /
• pp.566-569
• /
• 2000

This hybrid position/force control for the dynamic walking of the biped robot is performed in this paper. After the biped robot was modeled with 14 degrees of freedom of the multibody dynamics, the equations of motion are constructed using velocity transformation technique. Then the inverse dynamic analysis is performed for determining the driving torques and the ground reaction forces. From this analysis, obtains the maximum ground contact force at the moment of contacting which act on the rear of the sole of swing leg and the distribution curve of the ground reaction. Because these maximum force and distribution type acts an important role to the stability of the whole dynamic walking, they are reduced and distributed smoothly by means of the trajectory of the modified ground reaction force. This new trajectory is used to the reference input for more stable dynamic walking of the whole walking region.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.244-244
• /
• 2000

We proposed the above-knee prosthesis using rotary MR damper in which knee joint is semi-actively controlled by microprocessor. Dissipation torque in the knee joint can be controlled by the magnetic field which is induced by applying current to a solenoid, Tracking control of knee joint angle was tested by 3-DOF Leg simulator. The experimental results show that the proposed above-knee prosthesis system had good performance in swing phase tracking and repetitive controller in conjunction with a computed control law and PD control law, reduced RMS tracking error as the repetitions of tracking. Moreover, desired knee angle trajectory was generated based on the estimation of gait period with the gyro signal and the tracking control was performed.

• Proceedings of the KIEE Conference
• /
• 1998.07g
• /
• pp.2339-2341
• /
• 1998

This paper is concerned with an energy optimization for the walking of IWR biped robot. The movement of balancing joints are determined by ZMP(Zero Moment Point) and dynamic properties caused by motion of a swing leg. Therefore, ZMP positions have an important role in walking and guarnateeing the stability of a robot. A genetic algorithm is utilized for solving this problem and finding ZMP with a minimum energy at each sampling time during the walk. In this study, we performed an energy optimization with desired ZMP trajectories and motion of balancing joints.

• Proceedings of the KIEE Conference
• /
• 1998.07g
• /
• pp.2345-2347
• /
• 1998

This paper deals with the trajectory planning of IWR biped robot using genetic algorithm. The trajectory of a swing leg is generated by 5th order polynomial equation. Velocities and Acceleration properties on a viapoints are needed. These constants are given by heuristic method. The optimal values are determined by G.A to minimize the jerk of a trajectory. As a result, trajectory planning is implemented not on between two viapoints but on a whole interval. Efficient numerical calculation routines and walking algorithms for simulation are accomplished by MATLAB package.

• Korean Journal of Applied Biomechanics
• /
• v.21 no.5
• /
• pp.585-593
• /
• 2011

The purpose of this study was to analyze, from a kinematical point of view, the high jump techniques of three women's high jump winners at the IAAF World Championships, Daegu 2011. The trends for the techniques of the world's top high jumpers were examined, with a view toward adapting these techniques to the physical characteristics of Korean women's high jumpers. It was valuable that Di Martino, who was the shortest in height, was able to win a medal by using a single arm swing take-off technique, along with a half flexed leading leg swing to attain a deep arch and clear the bar. This showed that the world's top athletes used jumping techniques with no decrease in the run-up velocity at the take-off. Furthermore, It appeared that the knee joint angle at take-off had a direct effect on the body position at take-off (H1).