• 제목/요약/키워드: swing leg

검색결과 77건 처리시간 0.025초

4족 보행 로봇의 착지점 선정에 관한 연구 (A Study on the Footholds Selection for Quadruped Walking Vehicle)

  • 정경민;박윤창
    • 한국정밀공학회:학술대회논문집
    • /
    • 한국정밀공학회 2000년도 추계학술대회 논문집
    • /
    • pp.7-10
    • /
    • 2000
  • Inadequate footholds selection may result in deadlock state where the walking vehicle can not anymore to the desired direction. This paper concerns about the footholds selection for quadruped v, vehicle to walk with the leg lifting sequence of crawl gait which is desired for straight motion. supporting states for lifting a leg are defined and the proper supporting condition for quadruped c: also proposed. When selecting a footholds of swing leg within the proposed footholds searching are; supporting states after the swing legs are placed, satisfy the proper supporting condition. So it can I for quadruped to execute continuous walking with the lifting sequence of crawl gait.

  • PDF

필라테스 운동의 경험에 따른 엉덩관절 벌림, 리프트, 레그스윙 동작 동안의 몸통 안정화 근육 활성도에 미치는 효과 비교 (Comparative Study on Trunk Stabilizers Activity between Experienced Pilates Exercise during Hip abduction, Lift, Leg Swing Motion)

  • 이영진;추연기;오태영
    • 대한통합의학회지
    • /
    • 제6권4호
    • /
    • pp.91-100
    • /
    • 2018
  • Purpose : The study investigated the effects of Pilates exercise on strengthening trunk muscles of females who perform such exercise for the purpose of comparing activation of trunk muscles that contact while performing Pilates motions between females with or without at least 8 weeks of Pilates experience. Methods : The study investigated 10 females with at least 8 weeks of Pilates experience in the past 6 months (experienced group) and 10 healthy females without Pilates experience (non-experienced group). The study used basic Pilates postures involving hip abduction, lift, and leg swing motions as the measurement postures in comparing the activation of muscles used for stabilization, such as the rectus abdominis, external oblique abdominal, and transverse abdominis & internal oblique abdominal muscles. Surface electromyography was used for measuring muscle activation, and the measurements targeted activation of the rectus abdominis, external oblique abdominal, transversus abdominis, and internal oblique abdominal muscles. Results : The study results showed that, as compared to the non-experienced group, the experienced group had significantly higher muscle activation in the transverse abdominis and internal oblique abdominal muscles during hip abduction (p<.05) and significantly higher muscle activation in the rectus abdominis, external oblique abdominal, and transverse abdominis & internal oblique abdominal muscles during lift and leg swing motions (p<.05). Conclusion : Pilates exercise performed over a long period can be recommended as an effective exercise method that can increase the activation of trunk muscle, and especially, repeated performance of highly difficult motions can increase muscle activation even more, which can help promote spinal stabilization, prevent pain, and improve performance of activities of daily living.

입각기.유각기 동시제어식 대퇴의지의 개발 (Development of a Stance and Swing Phase Control Transfemoral Prosthesis)

  • 김신기;김경훈;문무성;이순걸;백영남
    • 대한기계학회논문집A
    • /
    • 제25권4호
    • /
    • pp.685-694
    • /
    • 2001
  • In this study, a transfemoral prosthesis system of which both stance phase and swing phase are controllable has been developed for the recovery of the biomechanical function of the amputated leg. It consists of a 5 bar link mechanism, a hydraulic-rubber knee damper for stance phase control and a pneumatic cylinder controlled via a microprocessor for stance phase control. The mechanical characteristics of the knee damper which absorbs the impact energy generated at the heel contact were investigated. The characteristics of the pneumatic cylinder essential for the speed adaptation of the prosthesis during swing phase were also studied for its mechanical characteristics. The prosthesis was subject to the clinical tests, and the gait characteristics obtained were very close to those of normal subjects. The stance and swing controlled prosthesis that were developed in this study showed good stability during the stance phase and showed good controllability during the swing phase.

입각기와 유각기 제어 대퇴의지의 개발 (Development of a Stance & Swing Phase Control Transfemoral Prosthesis)

  • 김신기;김종권;홍정화;김경훈;문무성;이순걸;백영남
    • 대한기계학회:학술대회논문집
    • /
    • 대한기계학회 2000년도 추계학술대회논문집A
    • /
    • pp.504-509
    • /
    • 2000
  • In this study, a transfemoral prosthesis system of which stance phase and swing phase are controlled during walking has been developed for the recovery of the biomechanical function of the amputated leg. It consists of a 5 bar link mechanism, a hydraulic-rubber knee damper for stance phase control and a pneumatic cylinder controlled via a microprocessor for stance phase control. The mechanical characteristics and behaviour of the knee damper which absorbs the impact energy generated at the heel contact was investigated. The characteristics of the pneumatic cylinder essential for the speed adaptation of the prosthesis during swing phase was also studied for its mechanical characteristics. The prosthesis was subject to the clinical test ant the gait characteristics obtained were very close to those of normal. The stance and swing controlled prosthesis that were developed in this study showed good stability during the stance phase and showed good controllability during the swing phase.

  • PDF

지면반력분석기를 이용한 골프 스윙의 분석 평가 방법 (A Method for Analyzing and Evaluating the Golf Swing Using the Force Platform Data)

  • 성낙준
    • 한국운동역학회지
    • /
    • 제20권2호
    • /
    • pp.213-219
    • /
    • 2010
  • The purpose of this study is developing a method to analyze and evaluate a golf swing motion using the ground reaction force (GRF) data. Proper weight shifting is essential for a successful shot in golf swing and this could be evaluated by means of the forces between the feet and ground. GRF during the swing were measured from 15 low-handicapped male golfers including professionals. Four clubs(driver, iron 3, iron 5, and iron 7) were selected to analyze the differences due to different characteristics of club. Swings of each subject were taken using a high speed video camera and GRF data were taken simultaneously by two AMTI force platforms. To simplify the GRF data, forces of the three major component of GRF(vertical, lateral, anterior-posterior force) at 10 predefined temporal events for each trial were selected and the mean of each event were calculated and evaluated. Analyzed vertical GRF (VGRF) data could be divided into two different styles, one-legged and two legged. One-legged style shows good weight transfer to the target leg and most of the previous study shows this style as a typical pattern of good players. Therefore the data from the iron 5 swing obtained from 10 one-legged style golfers are provided as criteria for the evaluation of a swing.

뇌졸중 환자의 직선보행과 곡선보행 시 시공간적 변수의 비교 (Comparison of Spatiotemporal Parameters during Straight and Curve Walking for Patients with Stroke)

  • 최보라;우영근;황수진
    • PNF and Movement
    • /
    • 제17권1호
    • /
    • pp.129-136
    • /
    • 2019
  • Purpose: This study is a comparison of spatiotemporal parameters between straight and curved walking in individuals with chronic hemiparetic stroke, investigating whether those patients can adapt their walking according to task demands and environmental changes. Methods: Twenty-eight patients who diagnosed with their first stroke at least six months prior to this study were recruited. They were measured for spatiotemporal parameters in three different walking conditions: straight walking, walking with an inner curve to the more-affected leg, and walking with an inner curve to the less-affected leg. This study also measured secondary clinical factors, such as the timed up-and-go test, the trunk impairment scale, and the dynamic gait index. The statistical methods for the three different walking conditions, using the averaged value of each condition, was repeated measures ANOVA. Results: The difference in cadence was statistically significant when comparing straight walking, walking with an inner curve to the more-affected leg, and walking with an inner curve to the less-affected leg. Swing duration (%) was also a statistically significant difference between straight walking and walking with an inner curve to the more-affected leg. However, differences in other spatiotemporal parameters were not statistically significant among the three conditions. Conclusion: The results of this study suggest that stroke survivors could adapt their walking according to straight and curved walking conditions, although cadence and swing duration were different between straight and curved walking groups.

소형 곤충형 지상 이동 로봇 주행 메커니즘의 다리 기구 설계 및 분석 (Design and Analysis of Leg Linkage of Small-scale Insect-inspired Ground Mobile Robot)

  • 임소정;이성준;백상민;허석행;유재관;조규진
    • 로봇학회논문지
    • /
    • 제18권3호
    • /
    • pp.285-292
    • /
    • 2023
  • Small-scale ground mobile robots can access confined spaces where people or larger robots are unable. As the scale of the robot decreases, the relative size of the environment increases; therefore, maintaining the mobility of the small-scale robot is required. However, small-scale robots have limitations in using a large number of high-performance actuators, powerful computational devices, and a power source. Insects can effectively navigate various terrains in nature with their legged motion. Discrete contact with the ground and the foot enables creatures to traverse irregular surfaces. Inspired by the leg motion of the insect, researchers have developed small-scale robots and they implemented swing and lifting motions of the leg by designing leg linkages that can be adapted to small-scale robots. In this paper, we propose a leg linkage design for insect-inspired small-scale ground mobile robots. To use minimal actuation and reduce the control complexity, we designed a 1-DOF 3-dimensional leg linkage that can generate a proper leg trajectory using one continuous rotational input. We analyzed the kinematics of the proposed leg linkage to investigate the effect of link parameters on the foot trajectory.

라그랑지 방법을 이용할 철봉 몸굽혀 휘돌기 동작의 시뮬레이션 (Simulation of Scooped Swing in High Bar Using Lagrange's Method : A Case Study)

  • 하종규
    • 한국콘텐츠학회논문지
    • /
    • 제7권4호
    • /
    • pp.234-240
    • /
    • 2007
  • 이 연구는 철봉 몸굽혀 휘돌기 동작의 최적 모델을 구축하는 것이다. 연구 대상자는 국가대표 남자체조선수(나이 18세, 신장 153cm, 질량 48kg) 1명을 선정하였고, K대학교 체조장에 기 설치된 Spieth사의 철봉을 이용하여 실험하였다. 먼저 대상자에게 연구의 목적과 주의 사항을 주지시키고 사전 서면동의를 받은 후 실험을 실시하였다. 인체를 2분절로 모형화한 몸 굽혀 휘돌기 동작의 영상분석을 위하여 Qualisys사의 카메라(MCU-240) 6대와 소프트웨어인 QTM(Qualisys Track Mannager)을 사용하였다. 이 동작을 이중진자(HAT/total leg)로 모형화하고 라그랑지 운동방정식의 파라메터에 실험에서 획득한 수치를 입력하여 시뮬레이션하였다. 데이터 처리와 모델(미분 연립 방정식)의 해는 Mathematicas5.0으로 프로그래밍하여 구하였다. 분석변인에 대한 모델치와 실험치의 비교 결과는 첫째, 철봉의 최대변위는 모델치(약 0.18 m)가 실험치(약 0.16 m)보다 약 0.02m 더 크게 나타났다. 둘째, 분절1(HAT)의 각변위 패턴은 모두 증가곡선을 보였으나 변곡점의 차이가 나타났다. 셋째, 분절2(total leg)의 각변위 패턴은 전반적으로 유사하게 나타났으나 최대 각은 약 $4^{\circ}$ 차이를 보였다. 결론적으로 실험치와 일치하는 최적모델을 도출하지는 못하였지만 라그랑지 모델을 통한 시뮬레이션의 가능성을 제시하였다. 향후 제한된 2분절 모형을 3, 4분절 모델로 확장하고 생체물성(근골격계)을 정확하게 표현하는 물리적 도구를 개발하는 연구와 인체시스템을 근골격계와 근신경계을 통합한 모델구축이 이루어져야 하겠다.

Walking Features Detection for Human Recognition

  • Viet, Nguyen Anh;Lee, Eung-Joo
    • 한국멀티미디어학회논문지
    • /
    • 제11권6호
    • /
    • pp.787-795
    • /
    • 2008
  • Human recognition on camera is an interesting topic in computer vision. While fingerprint and face recognition have been become common, gait is considered as a new biometric feature for distance recognition. In this paper, we propose a gait recognition algorithm based on the knee angle, 2 feet distance, walking velocity and head direction of a person who appear in camera view on one gait cycle. The background subtraction method firstly use for binary moving object extraction and then base on it we continue detect the leg region, head region and get gait features (leg angle, leg swing amplitude). Another feature, walking speed, also can be detected after a gait cycle finished. And then, we compute the errors between calculated features and stored features for recognition. This method gives good results when we performed testing using indoor and outdoor landscape in both lateral, oblique view.

  • PDF