• 제목/요약/키워드: swept away

검색결과 28건 처리시간 0.048초

전향 스윕 프로펠러 홴의 성능 및 유동특성 (Performance and Flow Characteristics of a Forward Swept Propeller Fan)

  • 김진권;강신형
    • 대한기계학회논문집B
    • /
    • 제24권1호
    • /
    • pp.75-84
    • /
    • 2000
  • Performance and flow characteristics of a small forward swept propeller fan for home refrigerators are studied experimentally. An unusual discontinuity is observed in the performance curve of the fan. Mean flow fields measured with as-hole Pitot probe reveal that the flow is axial at the high flow rate and radial at the low flow rate. The flow structure changes abruptly across the discontinuity. Unsteady flow measurements with a set of hot-wire probes indicate that near the discontinuity a single-cell stall rotates at 40% speed of the fan speed, while away from the discontinuity the flow shows periodic variation corresponding to the blade passage frequency. Phase-lock averaged flow fields measured with a triple-sensor hot-wire probe show that there appears radially inward flow over the pressure side of the blade and the outward passage flow over the tip.

흙 지붕 경사면의 혼합종자 파종에 의한 식생분포 연구 (A Study of Vegetation Distribution due to Mixed Seeding on a Slanted, Soiled Roof)

  • 정동양
    • 한국환경복원기술학회지
    • /
    • 제12권5호
    • /
    • pp.110-120
    • /
    • 2009
  • The hipped roof on the research building, which was constructed 51.9m above sea level on a hillock by Korea National University of Education in June 1999, is composed of four inclined planes which are 12m in breadth, 8m in length and have a 30 degree gradient. For the roof vegetation, the yellow earth collected from around the building was laid on top. It was designed to supply the soil on the slope with water for a considerable period by making rainfall pool at the edges. In order to prevent the soil on the slope from being swept away, 31 sorts of grass seeds were imported from Germany and sown in the soil. At the present day, 10 years after the seeds began to sprout and inhabit the settled slope, 30 individual plant species were identified in the period between April 2008 and March 2009. Out of 31 species were seeded on the slanted, soiled roof, only 8 were still alive. It was confirmed that the Artemisia Princeps var, Chrysantheum, Prunella Vulgaris and Lespedeza Cuneata have been the major species inhabiting the east, west, south and north inclined planes respectively. The Phragmites Communis was inhabiting the edge of the roof where the water supply was adequate, while the Dianthus Barbatus was primarily inhabiting the south-east side of the roof. As a whole, 26 identifiable plants and 4 unidentified plants were observed on the inclined planes of the hipped roof. In consideration of the plant distribution on the slope, it was confirmed that the selection of seeds may have had an effect on the slope vegetation. As for the yellow earth laid on the roof, it was discovered that about 2~3cm thickness around the ridge was swept away, but the rest of the slope was in relatively good condition. Accordingly, it has been proven that vegetations can be applied to hipped roofs by using ordinary plants without any special structural measures.

초기 횡방향 유동이 존재하는 충돌제트/유출냉각에서 요철이 설치된 유출면에서의 열/물질전달 특성 (Heat/Mass Transfer Characteristics on Rib-roughened Surface for Impingement/Effusion Cooling System with Initial Crossflow)

  • 이동호;남용우;조형희
    • 대한기계학회논문집B
    • /
    • 제28권3호
    • /
    • pp.338-348
    • /
    • 2004
  • The present study is conducted to investigate the effect of rib arrangements on an impingement/effusion cooling system with initial crossflow. To simulate the impingement/effusion cooling system, two perforated plates are placed in parallel and staggered arrangements with a gap distance of 2 times of tile hole diameter. Initial crossflow passes between the injection and effusion plates, and the square ribs (3mm) are installed on the effusion plate. Both the injection and effusion hole diameters are 10mmand Reynolds number based on the hole diameter and hole-to-hole pitch are fixed to 10,000 and 6 times of the hole diameter, respectively. To investigate the effects of rib arrangements, various rib arrangements, such as 90$^{\circ}$transverse and 45$^{\circ}$angled rib arrangements, are used. Also, the effects of flow rate ratio of crossflow to impinging jets are investigated. With the initial crossflow, locally low transfer regions are formed because the wall jets are swept away, and level of heat transfer rate get decreased with increasing flow rate of crossflow. When the ribs are installed on the effusion plate, the local distributions of heat/mass transfer coefficients around the effusion holes are changed. The local heat/mass transfer around the stagnation regions and the effusion holes are affected by the rib positions, angle of attack and rib spacing. For low blowing ratio, the ribs have adverse effects on heat/mass transfer, but for higher blowing ratios, higher and more uniform heat transfer coefficient distributions are obtained than the case without ribs because the ribs prevent the wall jets from being swept away by the crossflow and increase local turbulence of the flow near the surface. Average heat transfer coefficients with rib turbulators are approximately 10% higher than that without ribs, and the higher values are obtained with small pitch of ribs. However, the attack angle of the rib has little influence on the average heat/mass transfer.

Weld Defect Formation Phenomena during High Frequency Electric Resistance Welding

  • Choi, Jae-Ho;Chang, Young-Seup;Kim, Yong-Seog
    • Journal of Welding and Joining
    • /
    • 제19권3호
    • /
    • pp.267-273
    • /
    • 2001
  • In this study, welding phenomena involved in formation of penetrators during high frequency electric resistance welding were investigated. High speed cinematography of the process revealer that a molten bridge between neighboring skelp edges forms at apex point and travels along narrow gap toward to welding point at a speed ranging from 100 to 400 m/min. The bridge while moving along the narrow gap swept away oxide containing molten metal from the gap, providing oxide-free surface for a forge-welding at upsetting stand frequency of the budge formation, travel distance and speed of the bridge were affected by the heat input rate into strip. The travel distance and its standard deviation were found to have a strong relationship with the weld defect density. Based on the observation, a new mechanism of the penetrator formation during HF ERW process is proposed.

  • PDF

강우로 유실된 철도노반 보수용 토목섬유 콘테이너의 상호마찰 특성 (Interface Frictional Characteristics of Geotextile Container for the Restoration of Roadbed swept away by Rainfall)

  • 황선근;최찬용;신은철;이명호
    • 한국철도학회:학술대회논문집
    • /
    • 한국철도학회 2002년도 추계학술대회 논문집(I)
    • /
    • pp.587-595
    • /
    • 2002
  • Geotextile containers for restoration of slopes form the interface between the containers during the restored to lost slopes, and therefore the relation displacements are developed including the sliding on the surface. Since, the shear strength on these interfaces is less than that of fill material in the container, the characteristics of shear strength on the interface governs the behavior of the restoration slopes. In general, a lot of natural properties of geotexiles is required to evaluate the safty of the geotextiles, Among the properties, the shear characteristics between geotextiles and soil is a important variable to assess the safety. From the results of full scale direct shear test, the residual shear strength is recommanded to use for design factors since a large deformation possibly occures on the geotextile containers.

  • PDF

도심하천 수생식물의 흐름에 대한 대응 분석 및 식재영역 결정 (Flow response and habitat region of aquatic plants in urban streams)

  • 김성환;최계운;김진홍
    • 한국습지학회지
    • /
    • 제20권1호
    • /
    • pp.35-42
    • /
    • 2018
  • 본 연구에서는 도심구간 하천의 수생식물을 대상으로 흐름에 대한 대응양상 판단 및 식재영역 결정을 목표로 하였다. 수생식물로서 달뿌리풀, 갈대, 물억새, 개여뀌 및 고마리를 선정하고 흐름의 유속과 수심 및 식생의 성장도에 대하여 대응 분석하여 상기 수생식물의 식재영역을 결정하였다. 수생식물의 대응은 일반적으로 흐름에 대하여 안정, 회복, 훼손 및 유실로 구분되었다. 현지 조사 결과 수생식물의 회복과 훼손 정도는 식생의 휘어짐 각도를 기준으로 대략 $30^{\circ}{\sim}50^{\circ}$의 범위에서 구분되었다. 식생은 달뿌리풀, 갈대, 물억새, 개여뀌 순으로 흐름에 대한 대응력이 컸다. 달뿌리풀은 뿌리의 강한 고착력으로 수심이 0.9 m에서 유속 1.5 m/s까지 대응력이 강했다. 갈대는 수심 1.0 m와 유속 0.9 m/s 범위 내에서 흐름에 대응 가능하였다. 물억새는 대체적으로 수심 1.0 m와 유속 0.6 m/s 이하가 식재 가능 영역으로 제한된 식재 범위를 나타내었다. 개여뀌나 고마리는 흐름에 대한 대응력이 보다 약하며, 수심이 1.0 m를 넘는 경우 유속이 조금만 커져도 생존이 어려웠다. 상기 결과를 이용하여 수생식물 각 수종별 식재영역을 제시하였다.

아동의 모래놀이치료에서 물(水)을 통한 연행의 상징 분석 (An Analysis of the Archetypical Symbols of Children's Performance with Water During Sandplay Therapy)

  • 고은경;정계숙
    • 아동학회지
    • /
    • 제32권3호
    • /
    • pp.185-202
    • /
    • 2011
  • The purpose of this study was to understand the archetypical symbols present when conducting sandplay therapy with water from a hermeneutic point of view. The research participants were 6 children aged 8~9 who experienced problems in parent-children relationships. The result were as follows : The nature of archetypical symbols of present when working with water can be structured along two themes, vertical movements and horizontal movements. In vertical movements with three sub-themes, the meaning of 'to put in and boil out' is interpreted as 'mother's feeding baby', the meaning of 'to sink and bring out of water' is interpreted as 'resource acquisition', 'to swamp and float on the water' represents 'death and rebirth'. In horizontal movements consisted of two sub- themes, the meaning of 'to be swept away' is interpreted as 'initiation and conversion', the meaning of 'to wave and fix' is interpreted as 'to overcome the difficulties and create stability'.

종자피복, 경사조절 및 토양멀칭 처리가 녹화식물의 발아와 생장에 미치는 영향 (Effects of Seed Coating, Slope Control and Soil Mulching on Seed Germination and Seedling Growth of Rehabilitation Plants)

  • 이병태;박종민
    • 한국환경복원기술학회지
    • /
    • 제9권6호
    • /
    • pp.38-51
    • /
    • 2006
  • This study was carried out to improve rehabilitation effect by hydro-seeding methods on denuded slopes. Lespedeza cyrtobotrya, Indigofera pseudotinctoria, Arudinella hirta, Poa pratensis, and Lolium perenne were used in this study. The results of the germination and growth characteristics by seed coating, slope control and soil mulching treatments are summarized here. Seed coating of those plants had an effect on germination ratio, germination force, $LD_{50}$, and seedling growth of stem, leaf and root. The seed coating effect was highest for I. pseudotinctoria while the seedling growth was best for L. cyrtobotrya. Vermiculite+Talcum was the best coating material for germination and seedling growth of the plants. As the slopes were steeper, germination ratio was lower and seedling growth of stem and root decreased. Lots of seeds and soils were swept away when the slope was steep. Soil mulching was effective for germination, seedling growth of stem and root, and soil stabilization. It was more effective when the slope was steeper. Coir net was the most effective soil mulching material n this study.

SBP를 이용한 해저 천부에 유실된 사석의 조사 (Mapping of the lost riprap in shallow marine sediments using SBP)

  • 신성렬;김찬수;여은민;김영준;하희상
    • 한국마린엔지니어링학회:학술대회논문집
    • /
    • 한국마린엔지니어링학회 2005년도 후기학술대회논문집
    • /
    • pp.220-221
    • /
    • 2005
  • Sub-bottom profiler(SBP) has been used extensively for the mapping of basement in the foundation design of offshore structure, for pre- and post-dredging operations within harbors and channels, for selection of pipeline routes, sitting of drilling platforms, and in the exploration for an aggregates such as sands and gravels. During the construction of Siwha embankment for irrigation water and the expansion of arable land, the breaking of an embankment unfortunately occurred so that a lot of riprap was swept away and widely dispersed by the tide and strong current. The feasibility study for the construction of the tidal-powered electric plant in Siwha embankment was performed quite recently. Therefore we made use of SBP survey to investigate the distribution of the lost riprap. We could successfully map out the distribution of the lost riprap from the reflection amplitude characteristics of the sediments in SBP data set. We demonstrated the variation of reflection amplitude versus the sediments with and/or without riprap by means of the numerical modeling of acoustic wave equation using finite difference method. Also we examined an amplitude anomaly of the ripraped area through the physical modeling using ultrasonic.

  • PDF

기류순환이 연기농도와 감지기 작동에 미치는 영향 (Smoke Density and Operation of Fire Detector Influenced by Air Stream)

  • 이복영;이병곤
    • 한국화재소방학회논문지
    • /
    • 제16권4호
    • /
    • pp.28-32
    • /
    • 2002
  • 성능위주의 화재감지설비 설계시 공조설비 또는 실내 온도조절장치에 의한 실내기류 순환으로 연기기류가 정상해석에 의한 연기분포, 연기농도가 형성되지 못하여 화재감지지연이 예상되는 것을 실험 및 분석을 통하여 성능위주의 예방설비 구현을 위한 연구를 수행하였다. 실험연구는 공조설비가 가동하고 있는 통신기계실의 화재시 화재감지기의 작동을 예측하고자 천장부의 연기농도분포를 측정·분석하는 실험을 수행하였으며, 그 결과 기류순환에 의해 기존 Passive Type의 화재감지장치는 감지불가 또는 감지지연이 예상되었으며, 조기화재감지를 위하여 방호공간의 공기를 강제로 흡입·분석하여 화재를 감지하는 Active Type의 Air Sampling Smoke Detection system의 적용이 필요한 것으로 나타났다.