• Geomechanics and Engineering
• /
• 제15권6호
• /
• pp.1135-1141
• /
• 2018

Volume changes of soils induced by inorganic acids cause severe foundation and superstructure failures in industrial buildings. This study aimed to assess the potential of fly ash to control volume changes in soils under acidic environment. Two soils such as black cotton soil predominant with montmorillonite and kaolin clay predominant with kaolinite were used for the present investigation. Both soils exhibited an increase in swelling subjected to phosphoric acid contamination. Ion exchange reactions and mineralogical transformations lead to an increase in swelling and a decrease in compressibility in black cotton soil, whereas phosphate adsorption and mineral dissolution lead to an increase in swelling and compressibility in case of kaolin clay. Different percentages of Class F fly ash obtained from Ramagundam national thermal power station were used for soil treatment. Fly ash treatment leads to significant reduction in swelling and compressibility, which is attributed to the formation of aluminum phosphate cements in the presence of phosphoric acid.

• Nuclear Engineering and Technology
• /
• 제46권2호
• /
• pp.159-168
• /
• 2014

In order to advance understanding of the breakaway swelling behavior of U-Mo/Al dispersion fuel under a high-power irradiation condition, the effects of fuel-matrix interaction on the fuel performance of U-Mo/Al dispersion fuel were investigated. Fission gas release into large interfacial pores between interaction layers and the Al matrix was analyzed using both mechanistic models and observations of the post-irradiation examination results of U-Mo dispersion fuels. Using the model predictions, advantageous fuel design parameters are recommended to prevent breakaway swelling.

• Nuclear Engineering and Technology
• /
• 제52권2호
• /
• pp.344-351
• /
• 2020

AgInCd alloy is widely used as neutron absorber in nuclear reactors. However, the AgInCd control rods may fail during service due to the irradiation swelling. In the present study, a calculational method is proposed to calculate the composition change of the AgInCd absorber. Calculated results show that neutron fluence has significant impact on the chemical compositions. Ag and In contents gradually decrease while Cd and Sn conversely increases from the center to the rim of AgInCd absorber due to the depression of neutron flux. The composition change at the surface is higher almost two times than that at the center. Based on the calculated compositions, six simulated AgInCdSn alloys were prepared and examined. With the increase of Cd and Sn, the simulated AgInCdSn alloys transform from a single fcc phase into the mixed fcc and hcp phases, and finally into the single hcp phase. The atomic volume of the hcp phase is obviously larger than the fcc phase. The fcc-hcp transformation results in considerable volume swelling of the AgInCd absorber. Moreover, the lattice parameters of the fcc and hcp phases gradually increase with Cd and Sn contents, which also can induce small volume swelling.

• Nuclear Engineering and Technology
• /
• 제48권2호
• /
• pp.330-338
• /
• 2016

The U-Zr or U-TRU-Zr cylindrical metallic fuel slug used in fast reactors is known to swell significantly and to grow during irradiation. In neutronics simulations of metallic-fueled fast reactors, it is assumed that the slug has swollen and contacted cladding, and the bonding sodium has been removed from the fuel region. In this research, a realistic burnup-dependent fuel-swelling simulation was performed using Monte Carlo code McCARD for a single-batch compact sodium-cooled breed-and-burn reactor by considering the fuel-swelling behavior reported from the irradiation test results in EBR-II. The impacts of the realistic burnup-dependent fuel swelling are identified in terms of the reactor neutronics performance, such as core lifetime, conversion ratio, axial power distribution, and local burnup distributions. It was found that axial fuel growth significantly deteriorated the neutron economy of a breed-and-burn reactor and consequently impaired its neutronics performance. The bonding sodium also impaired neutron economy, because it stayed longer in the blanket region until the fuel slug reached 2% burnup.

• Nuclear Engineering and Technology
• /
• 제55권1호
• /
• pp.80-99
• /
• 2023

This paper presents the results of investigating the change in welding residual stresses of the core shroud, which is one of subcomponents in reactor vessel internals, performing finite element analysis. First, the welding residual stresses of the core shroud were calculated by applying the heat conduction based lumped pass technique and finite element elastic-plastic stress analysis. Second, the temperature distribution of the core shroud during the normal operation was calculated by performing finite element temperature analysis considering gamma heating. Third, through the finite element viscoelastic-plastic stress analysis using the calculated temperature distribution and setting the calculated residual stresses as the initial stress state, the variation of the welding residual stresses was derived according to repeating the normal operation. In the viscoelastic-plastic stress analysis, the effects of neutron irradiation on mechanical properties during the cyclic normal operations were considered by using the previously developed user subroutines for the irradiation agings such as irradiation hardening/embrittlement, irradiation-induced creep, and void swelling. Finally, the effect of neutron irradiation on the welding residual stresses was analysed for each irradiation aging. As a result, it is found that as the normal operation is repeated, the welding residual stresses decrease and show insignificant magnitudes after the 10^th refueling cycle. In addition, the irradiation-induced creep/void swelling has significant mitigation effect on the residual stresses whereas the irradiation hardening/embrittlement has no effect on those.

• 한국에너지공학회:학술대회논문집
• /
• 한국에너지공학회 1995년도 춘계학술발표회 초록집
• /
• pp.158-162
• /
• 1995

Synergistic effects of mixed solvents, especially with mixtures of CS$_2$ with electron donor solvents, in inducing desired structural changes in coals were studied by solvent swelling techniques in addition to differential scanning calorimetric analyses. Mixed solvents exhibit significant synergistic efficacy in swelling the coal structure of medium bituminous rank. This synergy effect appears to be physical origin that is closely related to matching solubility parameters. Since the swollen coal structure can be obtained by mixed solvents with CS$_2$ at room temperature instead of high temperature, many possible technological pathways for economical utilization of coal might be sought.

• Nuclear Engineering and Technology
• /
• 제24권1호
• /
• pp.40-51
• /
• 1992

연구용 원자로의 분산형 핵연료에 대한 노내 조사 거동의 주요 특성중의 하나는 핵연료심 팽윤에 기인된 핵연료봉 직경 증가이다. 본 논문에서는 분산형 우라늄실리사이드 핵연료에 대한 노내 조사거 동과 실험 증거들을 분석함으로써 그 핵연료의 팽윤에 대한 물리적 해석 모형인, DFSWELL 전산 모형을 개발하였다. 문헌에 보고된 실험 증거들로부터 노내에서 U$_3$Si-Al 핵연료심의 부피변화는 온도와 핵분열율에 따라 크게 영향을 받는 것으로 나타났다. 분산형 우라늄 실리사이드 핵연료에 대한 정량적 팽윤량은 주어진 온도, 핵분열율, 핵분열고체생성물 측적 및 핵분열기체 기포거동을 고려함으로써 평가될 수 있다. 연구로의 분산형 우라늄실리사이드 핵연료의 팽윤 현상은 다음과 같은 세 가지 현상으로 귀결된다. i ) 핵분열기체생성물 기포 생성/축적에 치한 부피변화 ii ) 고체 핵분열생성물의 축적 및 상 변화에 의한 부피변화 iii ) 핵연료 입자와 기지 사이의 공유층에 대한 부피변화 상기 세 가지의 물리 적 현상을 고려하는 본 DFSWELL 전산 모형의 출력이력 조건에 따른 절대 예측치들은 실행 결과와 비교할 때 분산형 우라윰실리 사이드 핵연료의 조사추 팽윤 실측치와 잘 일치한다.

• 한국농촌생활과학회지
• /
• 제8권2호
• /
• pp.125-129
• /
• 1997

The effect of mugwort powder on some physicochemical properties of rice flour, the viscosity of rice flour pastes and the degree of gelatinization of pastes and gels were investigated. By addition of mugwort, water binding capacity, swelling power, and solubility of rice flour were increased, also the viscosity and, the degree of gelatinization of rice flour pastes and gels were increased. Generally wet rice flour-mugwort pastes and gels were better than those of dry rice flour-mugwort. And viscosity and gelatinization of the rice-mugwort pastes and gels were decreased slightly during storage at $20^{\circ}C$ for 7 days.

• Food Science and Biotechnology
• /
• 제18권1호
• /
• pp.118-123
• /
• 2009

In order to find out the effect of low level of starch acetylation on physicochemical properties of potato starch, amylose content, digestibility of raw and gelatinized starch, thermal properties, pasting properties, and the swelling power of native and acetylated potato starches were measured. The amylose content was significantly lower in acetylated starch than in their counterpart native starches. Though a tendency in the decrease in digestibility of raw starch was observed with starch acetylation, acetylation did not alter the proportion of readily digestible starch (RDS), slowly digestible starch (SDS), and resistant starch (RS) of both raw and gelatinized potato starches. No clear increase in the swelling power was observed, however, the peak and onset gelatinization temperatures and the enthalpy required for starch gelatinization decreased with starch acetylation. Peak and breakdown viscosities were reduced due to acetylation of potato starch while final viscosity and set back were increased.

• 멤브레인
• /
• 제14권1호
• /
• pp.53-56
• /
• 2004

Direct Methanol Fuel Cell (DMFC) is considered as a candidate technology for applications in stationary, transportation as well as electronic power generation purposes. To develop a high performance direct methanol fuel cell(DMFC), a competent electrolyte membrane is needed. The electrolyte membrane should be durable and methanol crossover must be low. One of the approaches to increase the stability of generally used polymer electrolyte membranes such as Nafion against swelling or thermal degradation is to bond it with an inorganic material physically or chemically. In Noritake Company, we have developed a novel method of reinforcing the polymer electrolyte matrix with inorganic fibers. Methanol crossover values measured were significantly lower than the original polymer electrolyte membranes. These fiber reinforced electrolyte membranes (FREM) were used for DMFC study and stable power output values as high 160 mW/$\textrm{cm}^2$ were measured. The details of the characteristics of the membranes as well as I-V data of fuel cell stacks are detailed in the paper.