• Korean Journal of Veterinary Research
• /
• v.39 no.6
• /
• pp.1119-1125
• /
• 1999

Since Robert Koch found tubercle bacilli in 1882, the studies on tubercle bacilli of human and animal had been carried out. Being old tuberculin(OT) introduced in 1890, the specificity of the diagnosis of tuberculosis has been improved by continual uses of heat concentrated synthetic medium(HCSM) and purified protein derivatives(PPD) tuberculin. Now, two types of tuberculin test are used worldwidly ; the single intradermal test(SIT) using bovine tuberculin and the single intradermal comparative tuberculin test(SICTT) using avian and bovine tuberculins. In the SICTT, each countries have used with different combination of both avian and bovine tuberculins' titers. However, this kinds of studies have not reported in Korea. Therefore, the studies on the combination of their tuberculins' titers were performed through intradermal test of guinea pigs sensitized with either Mycobacterium bovis or M avium and were examined in 10 cattles of SIT positive reactors. Also, IFN-${\gamma}$ assay, the latest diagnostic method of bovine tuberculosis, was experimentally applied to SIT positive reactors. For determining the optimal titers, sensitized guinea pigs with M bovis and M avium were intradermally injected avian and bovine tuberculin. In guinea pigs sensitized with M bovis, bovine tuberculin 50 T.U. showed significant difference from all tested concentrations of avian tuberculin(p < 0.05). In guinea pigs sensitized with M avium, there is significantly different between bovine tuberculin and avian tuberculin by 25 T.U.(p < 0.01). Therefore, optimal titers of bovine and avian PPD tuberculins' titers for the SICTT in Korea were 5,000 and 2,500 tuberculin units, respectively, and the swelling diffences between bovine and avian site in SIT positive reactors were above 3mm. Also, in IFN-${\gamma}$ assay, the 9 SIT positive reactors were showed all the positive reactions.

• Food Science of Animal Resources
• /
• v.33 no.2
• /
• pp.162-169
• /
• 2013

We determined the optimum pretreatment conditions such as pH and time for swelling duck feet and investigated the effects of the extracting method, such as water bath (WB), pressure cooker (PC), and microwave oven (MO), on quality characteristics of the duck feet gelatin for improving utilization of duck feet as a novel source of gelatin. The soaking solution of pH 1 among pH 1-14 with unit intervals was selected due to the highest yield. The quality characteristics of the gelatin tested were color, pH, gel strength, viscosity, and melting point. For the extracted gelatin with different methods, the CIE $L^*$, $a^*$ and $b^*$ values were in the following order: MO>PC>WB (p<0.05), WB>PC>MO (p<0.05) and PC>MO>WB (p<0.05), respectively. The gelatin extracted using WB showed the highest pH and that extracted using MO showed the lowest pH (p<0.05). The gel strength, viscosity, and melting point were the highest for MO (p<0.05). The gel strength and melting point were the lowest for PC (p<0.05). No significant difference was found in viscosity between the gelatins extracted using WB and PC (p>0.05). The quality characteristic of duck feet gelatin was affected by extracting methods, and MO extraction can be one of the effective methods for duck feet gelatin.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.40 no.9
• /
• pp.1300-1306
• /
• 2011

This study investigated the physicochemical characteristics of wet-milled rice flour treated with pectinase and cellulase in a steeping process. Enzyme treatments were used as follows: pectinase 0.05%, cellulase 0.05%, and mixed enzyme treatments 0.05~0.2%. For particle distribution, rice flour E-treated with mixed enzymes (pectinase 0.05% and cellulase 0.05%) was the finest at 48.3% particle distribution less than $53\;{\mu}m$. Protein contents and damaged starch were reduced by enzyme treatments. Damaged starch was the lowest (12.1%) in rice flour E compared with non-enzyme treatment (18.1%). Amylose content, water binding capacity, solubility, and swelling power all increased upon enzyme treatments, and their effects increased upon mixed enzyme treatment. For gelatinization characteristics of RVA, peak viscosity, final viscosity, breakdown, and total setback viscosity increased in rice flours treated with mixed enzymes. Especially, in steeping method with mixed enzyme treatment, pectinase 0.05% and cellulase 0.05% treatment was suitable for minimizing damaged starch and high fine particle distribution of rice flours compared with single enzyme treatment.

• Journal of Korean Academy of Oral and Maxillofacial Radiology
• /
• v.25 no.2
• /
• pp.399-408
• /
• 1995

The purpose of this study was to obtain information on the clinical and radiographic features of the dentigerous cysts in the jaws. For this study, the authors examined and analysed the clinical records and radiographs of 233 patients who had lesions of dentigerous cyst diagnosed by clinical and radiographic or histopathological examinations. And the obtained results were as follows: 1. Dentigerous cysts occurred the most frequently in the 2nd decade(38.2％) and occurred more frequently in males(67.4％) than in females(32.6％). 2. The most common clinical symptom was swelling of the jaw(33.9％), and the lesions were treated by the method of surgical removal. 3. The type of lesions was mainly observed as central type(72.5％), and size of the lesion was most frequently observed 2 - 2.9cm in the widest length. 4. The lesions were most frequently observed well-defined outline with hyperostotic border(49.8％), and smooth margin(73.4％), and homogeneous lesional radiolucency(79.4％). 5. Cortical thinning and expansion of the lesions(82.0％) were observed, and their direction were most frequently observed toward buccal side(64.0％). 6. The effect on the causative tooth were observed as tooth displacement(41.2％) and delayed root development(l9.3％), and the distance between cemento-enamel junction and lesional wall attachment of the causative tooth was mainly observed as below 2mm(79.6％). 7. The effect on the adjacent tooth were observed as loss of lamina dura(66.8％), root resorption(33.9％), and tooth displacement(31.5％). 8. The effects on the adjacent anatomic structures were observed as displacement of the mandibular canal(46.5％) and maxillary sinus or nasal cavity(72.2％).

• Tuberculosis and Respiratory Diseases
• /
• v.49 no.2
• /
• pp.162-168
• /
• 2000

Background : Joint symptoms frequently occur in the course of antituberculous chemotherapy and tend to be ignored and overlooked, but in some cases, they are often very troublesome in obstructing ordinary life. Joint symptoms that develop during antituberculous chemotherapy need to be understood, but there are few materials describing them systematically. Method : This study enrolled 33 patients with tuberculosis treated with first line antituberculous agents for more than 6months. In the course of treatment, joint symptoms not associated with specific cause, such as preexisting joint disease or trauma, were investigated and compared with thæe of the asymptomatic group. We confirmed the incidence of joint symptoms and factors associated with them. Results : Nineteen of 33 patients (58%) had joint symptoms. Joint symptoms developed 1.9$\pm$1.4 months after the beginning of chemotherapy and lasted for 3.6$\pm$2.5months. In 18 of 19 symptomatic patients, multiple joints were involved: shoulder (10 patients, 53%), knee (10, 53%), finger (6, 32 %). Joint symptoms were expressed as pain (19 patiens, 100%), stiffness (7, 37%) and/or swelling (3, 16%). Fourteen patients (74%) took analgesics to relieve their symptoms and in 2 patients, antituberculous agents were discontinued because of the severity of their symptoms. The symptoms seem to be caused by agents other than pyrazinamide, but it was very difficult to identify the definite causative agent. In age, sex, underlying disease and serum uric acid level, no significant differences were noted between the two groups. Conclusions : Although joint symptoms are common during antituberculous chemotherapy, their development is difficult to predict. Because some joint symptoms can become very bothersome, the physician should pay close attention to these symptoms.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.13 no.3
• /
• pp.322-327
• /
• 2003

The water level of a steam generator of pressurized light water nuclear Power generator is known as a subject whose control is difficult because of a shrinking and swelling effect that is been mutually contradictory in a variation of feed water. In this paper, a neural network model selects first coordinative controller by a inappropriate gain of two PI controllers and the selected controller＇s gain is tuned by a fuzzy self-tuner. Model inputs consist of the water level, the feed water, and the stream flow. One controller of both coupling controllers whose gain is handled firstly is decided based upon above data. The proposed method can analyze patterns of signals using the characteristic of neural networks and select one controller that needs to be tuned through the observed result in this paper. If one controller between both the water level controller and the feed water controller is selected by the neural network model then a gain of the PI controller is suitably tuned by the fuzzy self-tuner. Rules of the fuzzy self-tuner drew from the pattern of input and output data. In the summary, the goal of this Paper is to select the suitable controller and tune the control gain of the selected controller suitably through such two processes.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.33 no.5
• /
• pp.535-542
• /
• 2007

Ameloblastoma, a benign tumor of odontogenic type, represents 10% of all tumors of the jaw. It is localized in the mandible(80%) and in the maxilla(20%). In every case, the selection of the surgical treatment must consider some fundamental elements, including the age and general state of health the clinicopathological variant, and the localization and extent of the tumor. This study was invested the clinicopathological findings of 23 patients with ameloblastoma which had been diagnosed by biopsy during the period of 1987 to 2005 at Chonnam National University Hospital. And it contained the statistical analysis according to the treatment methods and the clinicopathological findings such as sex, age, location, chief complaints, duration, radiographic findings, histologic findings, treatment methods. The results obtained are were follows. The age of patient ranged from 10 to 91 years(means, 35.9 years) at biopsy. Thirteen(57%) of the 23 subjects were males, and 10(43%) were females. Twenty(87%) of the 23 ameloblastomas were located in the mandible. Swelling was the most common symptom and was experienced by 20(87%) patients. Radiographically, 11(48%) of the 23 tumors were unilocular with a well-demarcated border and 12(52%) were multilocular. The most common histologic pattern was plexiform and acanthomatous rather then follicular. Conservative treatment was performed 7 cases(30%), radical treatment 11 cases(48%), and combined treatment 5 cases(22%). Follow-up period ranged from 2.1 years to 22 years(mean 5.1 years). Based on the above results, surgical excision after marsupialization was found to be useful as a preliminary treatment of the large cystic ameloblastoma in children and adolescents. On the contrary, the lesion with a soap bubble appearance, the one with ineffective marsupialization was subjected to extensive excision of the tumor with a wide margin of normal bone.

• Journal of the Korean Geotechnical Society
• /
• v.34 no.12
• /
• pp.71-82
• /
• 2018

This study presents a reasonable and economical DCM reinforcement length for the various factors (the embankment height, the distance from the embankment to the underground structure, the depth of the soft ground, and the compression index and the swelling index of the soft ground) that affect the stability of the structure due to lateral movement. Based on these results, we analyzed each factor's degree of influence and figured out which factor influenced the lateral movement most. The cross section of the embankment on the soft ground was modeled by using the Finite Element Program and reinforced with DCM. The results show that the increase rate of the reinforcement length with the increase of the embankment height is about 9~50%, the increase rate of the reinforcement length with the depth of soft ground is about 13~30%, and the increase rate of the reinforcement length with increasing compression index is about 3~25%. In addition, the influence of each factor on each other was analyzed. As a result, among the separation distance, the compressive index and the maximum to minimum slope ratio of the reinforcement length of the embankment height, the separation distance was the largest for the depth of soft ground. As the depth of the soft ground increases, the ratio of the maximum to minimum slope of the reinforcement length according to the embankment height is 3.75, the ratio of the maximum to minimum slope of the reinforcement length according to the spacing distance is 4.3, and the ratio of maximum to minimum slope according to compression index is 2.5. From these results, it is confirmed that the three factors are greatly affected by the depth of soft ground.

• Journal of the Korean Wood Science and Technology
• /
• v.31 no.4
• /
• pp.24-30
• /
• 2003

In order to develop structural 'bamboo zephyr board', properties of boards produced by various methods making zephyr were estimated. All of boards were tested with KS(Korean Standards) F 3014 Particle board, and results were summarized as follow. The zephyr boards produced by final 1.5 mm roller space had the best properties(MOR, MOE and IB strength) among boards produced by different final roller space. Also, they had the best properties(MOR and MOE) in bending test after 1 hour soaking treatment after 2 hour-boiling in water, which were similar to properties of boards in dry-condition. Thickness swelling(TS) of all boards was less than 12% required to the Korean Standards A 3014. Zephyr boards produced by final 1.5 mm roller space also had the lowest values among all of boards. Boards produced by non-treatment (in green condition) had the better strength than those of boards produced by different pre-treatment methods(boiling in water and in 0.3% NaOH) in bending test.

• Journal of the Korean Wood Science and Technology
• /
• v.51 no.6
• /
• pp.431-446
• /
• 2023

Samama wood (Anthocephalus macrophyllus (Roxb) Havil) is a fast-growing and lesser-utilized wood species that has inferior properties; therefore, its quality needs to be improved. This research aimed to determine the effect of citric acid impregnation at high curing temperatures on the dimensional stability and mechanical properties of wood. Citric acid solution with 10% concentration (w/w) was impregnated into wood samples by vacuum-pressure method (-0.5 cmHg, 30 min; 0.7 MPa, 3 h), followed by curing process at 140℃, 160℃, and 180℃ of temperature for 1 h. In comparison, the other wood samples were heat treated at the same temperatures and time. The results showed that the increase in curing and heat temperatures for both treatments were directly proportional to the dimensional stability, but inversely proportional to the mechanical properties. Citric acid impregnated had higher density, dimensional stability, and mechanical properties, except for modulus of rupture, than that of heat treatment. The optimum temperature is suggested at 160℃ in both treatments.