• Membrane and Water Treatment
• /
• 제6권4호
• /
• pp.339-349
• /
• 2015

Experiments were carried out using granular activated carbon (GAC) adsorption techniques to treat wastewater contaminated with organic compounds caused by diverse human activities. Two techniques were assessed: adsorbent GAC prepared from coconut shell (GACC) and adsorbent GAC from palm shell (GACP). A comparison of these two techniques was undertaken to identify ways to improve the efficiency of the treatment process. Analysis of the processed wastewater showed that with GACC the removal efficiency of biochemical oxygen demand (BOD), chemical oxygen demand (COD), turbidity, total suspended solids (TSS) and total dissolved solids (TDS) was 65, 60, 82, 82 and 8.7%, respectively, while in the case of GACP, the removal efficiency was 55, 60, 81, 91 and 22%, respectively. It can therefore be concluded that GACC is more effective than GACP for BOD removal, while GACP is better than GACC for TSS and TDS removal. It was also found that for COD and turbidity almost the same results were achieved by the two techniques. In addition, it was observed that both GACC and GACP reduced pH value to 7.9 after 24 hrs. Moreover, the optimal time period for removal of BOD and TDS was 1 hr and 3 hrs, respectively, for both techniques.

• Membrane and Water Treatment
• /
• 제10권1호
• /
• pp.67-74
• /
• 2019

Apparent changes in the natural hydrologic cycle causing more frequent floods in urban areas and surface water quality impairment have led stormwater management solutions towards the use of green and sustainable practices that aims to replicate pre-urbanization hydrology. Among the widely documented applications are infiltration techniques that temporarily store rainfall runoff while promoting evapotranspiration, groundwater recharge through infiltration, and diffuse pollutant reduction. In this study, a laboratory-scale infiltration device was built to be able to observe and determine the factors affecting flow variations and corresponding solids removal through a series of experiments employing semi-synthetic stormwater runoff. Results reveal that runoff and solids reduction is greatly influenced by the infiltration capability of the underlying soil which is also affected by rainfall intensity and the available depth for water storage. For gravel-filled structures, a depth of at least 1 m and subsoil infiltration rates of not more than 200 mm/h are suggested for optimum volume reduction and pollutant removal. Moreover, it was found that the length of the structure is more critical than the depth for applications in low infiltration soils. These findings provide a contribution to existing guidelines and current understanding in design and applicability of infiltration systems.

• 생명과학회지
• /
• 제28권4호
• /
• pp.496-507
• /
• 2018

톡소이드는 독성은 제거되고 항원성은 유지시킨 독소 단백질로써, 다양한 병원체의 감염 및 질병 예방을 위해 지속적으로 연구 되었다. 그러나, 톡소이드의 활성 감소 및 이와 함께 사용하는 어쥬번트의 부작용 등이 지속적으로 보고되면서, 면역성은 강화하고 어쥬번트의 사용은 줄일 수 있는 톡소이드 항원 전달 시스템이 필요하게 되었다. 따라서, 이러한 단점을 개선하고자 최근 새로운 백신과 약물 전달수송을 위해 다양한 분야에서 활용하고 있는 마이크로/나노 운반체를 톡소이드 항원에 도입하고 있다. 이와 같은 마이크로/나노 운반체는 미생물 자체를 이용하거나 미생물을 통해 생산해 낼 수도 있으며, 더 나아가 다양한 소재의 폴리머를 이용하여 제작할 수 있다. 본 총설에서는 톡소이드 항원 전달을 위한 마이크로/나노 운반체를 미생물 유래의 ghost cells (GCs), 그람 음성 세균이 분비하는 outer membrane vesicles (OMVs) 및 고분자 폴리머로 구성된 nanoparticles (NPs)으로 분류하였다. 마지막으로 각 운반체에 대한 톡소이드 항원의 전달 방식 및 이를 적용하였을 때 일어나는 면역반응에 대하여 서술하였으며, 이를 통해 향후 톡소이드의 효율 및 부작용이 개선되기를 기대한다.

• Environmental Engineering Research
• /
• 제25권3호
• /
• pp.299-308
• /
• 2020

Composting is among the most effective integrated waste management strategies used to recycle sewage sludge (SS) waste and generate a useful product. An encapsulated lifting system is a relatively new industrial-scale composting technology. The objective of this study was to evaluate the effectiveness of composting dewatered stabilized SS mixed with green waste using this new technology. The composting process was monitored by changes in the physico-chemical properties, UV-visible spectra, and fourier transform infrared (FTIR) spectra. The composting temperature was steady in the thermophilic range for 24 and 12 d in the intensive and maturation phases, respectively, which fulfilled the disinfection requirement. Moreover, the temperature increased rapidly to 76.8℃ within three days, and the thermophilic temperatures peaked twice and lasted longer than in traditional composting, which accelerated SS degradation and decreased the composting period necessary to obtain mature compost. FTIR spectroscopic analysis showed a diminished in methyl group derived from methylene C-H aliphatic groups because of organic matter degradation by microorganisms and an increased number of aromatic chains. The new technology may be a viable and sustainable alternative for SS management that converts waste into compost that is useful as a soil amendment.

• 한국수소및신에너지학회논문집
• /
• 제24권1호
• /
• pp.12-19
• /
• 2013

A gasification process with pre-combustion $CO_2$ capture process, which converts coal into environment-friendly synthetic gas, might be promising option for sustainable energy conversion. In the coal gasification for power generation, coal is converted into $H_2$, CO and $CO_2$. To reduce the cost of $CO_2$ capture and to maximize hydrogen production, the removal of CO and the additional production of hydrogen might be needed. In this study, a 2l/min water gas shift system for a coal gasifier has been studied. To control the concentration of major components such as $H_2$, CO, and $CO_2$, MFCs were used in experimental apparatus. The gas concentration in these experiments was equal with syngas concentration from dry coal gasifiers ($H_2$: 25-35, CO: 60-65, $CO_2$: 5-15 vol%). The operation conditions of the WGS system were $200-400^{\circ}C$, 1-10bar. Steam/Carbon ratios were between 2.0 and 5.0. The commercial catalysts were used in the high temperature shift reactor and the low temperature shift reactor. As steam/carbon ratio increased, the conversion (1-$CO_{out}/CO_{in}$) increased from 93% to 97% at the condition of CO: 65, $H_2$: 30, $CO_2$: 5%. However the conversion decreased with increasing of gas flow and temperature. The gas concentration from LTS was $H_2$: 54.7-60.0, $CO_2$: 38.8-44.9, CO: 0.3-1%.

• Korean Chemical Engineering Research
• /
• 제46권1호
• /
• pp.131-136
• /
• 2008

용매 N-methyl-2-pyrrolidone(NMP)과 dimethyl acetamide(DMAc)를 각각 사용하고 물을 비용매로 사용하는 상반전 기법에 의해, 실리카($SiO_2$)와 티타니아($TiO_2$) 나노입자가 각각 충진된 poly(vinylidene fluoride-co-hexafluoropropylene) (PVdF-HFP) 고분자 전해질을 제조하고, 이를 고용량 양극재료인 $Li[Ni_{0.15}Co_{0.10}Li_{0.20}Mn_{0.55}]O_2$를 주성분으로 하는 양전극과 리튬금속 음전극 사이에 채용하는 리튬금속 고분자 2차전지를 제작하여 그 충방전 특성을 조사하였다. 고분자 전해질 제조에 사용한 용매에 상관없이 실리카 충진재의 함량이 40~50 wt%인 상반전막을 고분자 전해질로 적용하였을 때 가장 높은 방전용량(180 mAh/g)을 나타내었으며, 이 경우 대개 80 사이클까지 초기용량의 99% 정도의 지속성을 보이다가 그 이후 급격한 용량 감소를 보였다. 이 용량 감소는 상반전막이 보장하는 용량 유지능력이 더이상 발휘될 수 없는 상태로 고분자 전해질에 리튬 dendrite가 침적되었기 때문이라 생각된다.

• 생명과학회지
• /
• 제31권10호
• /
• pp.954-959
• /
• 2021

세포 사멸은 항상성을 유지하기 위해 세포군을 조절하는 중요한 메커니즘이며 시스테인 단백질분해효소 중 하나인 카스파제는 세포 사멸 경로의 중요한 중재자이다. Caspase-8은 세포외 자극에 의해 시작되는 외인성 세포자멸 경로의 개시자 카스파제이다. Caspase-8에는 보존된 도메인인 N-말단의 두개의 죽음 이펙터 도메인(DED)과 C-말단의 2개의 촉매 도메인을 가지며, 이는 이러한 외인성 세포자멸 경로에 중요하게 작용한다. 외인성 세포멸사 경로에서, TNF 슈퍼패밀리인 죽음 수용체는 세포 외부로부터의 죽음 수용체 특이적 리간드의 결합에 의해 활성화된다. 활성화된 죽음 수용체가 어댑터 단백질인 Fas-associated death domain 단백질(FADD)을 모집한 후, 죽음 수용체와 FADD의 죽음 도메인(DD)이 서로 결합하고 죽음 수용체와 결합한 FADD가 caspase-8의 전구체 형태인 procaspase-8을 모집한다. FADD와 procaspase-8의 죽음 이펙터 도메인은 서로 결합하고 FADD에 결합된 procaspase-8은 prodomain의 절단에 의해 활성화된다. 이 죽음 수용체-FADD-caspase-8 복합체는 세포사멸 유도 신호복합체(DISC)라고 한다. 세포 FLICE 억제 단백질(c-FLIPs)은 세포사멸을 억제하는 역할과 촉진하는 역할을 모두 수행하여 caspase-8의 활성화를 조절하고 caspase-8 활성화는 caspase-3와 같은 작동자 카스파제를 활성화를 시킨다. 마지막으로 활성화된 작동자 카스파제는 DNA 분해, 핵 응축, 세포막 수포 및 카스파제 기질의 단백질 분해에 작용하여 세포사멸을 완료한다.

• Journal of Periodontal and Implant Science
• /
• 제33권3호
• /
• pp.457-474
• /
• 2003

The ultimate objective of periodontal treatment is to get rid of an on-going periodontal disease and further regenerate the supporting tissue, which is already destroyed, functionally. Currently, the bone grafting operation using various kinds of bone grafting materials and the operation for induced regeneration of periodontal tissue using the blocking membrane are performed for regeneration of the destroyed periodontal tissue. However, there are respective limitations Galenical preparations, which are used for regeneration of periodontal of tissue, has less risk of rejective reaction or toxicity that may be incidental to degradation and their effect is sustainable. Thus, in case they are applicable to a clinic, they can he used economically. Chitosan has such compatibility, biological actions including antibacterial activity, acceleration of wound treatment, etc., and excellent mechanical characteristics, which has recently aroused more interest in it. Also, it has been reported that it promotes osteogenesis directly or indirectly by functioning as a matrix to promote migration and differentiation of a specific precussor cell (for example, osteoblast) and further inhibiting the function of such a cell as fibroblast to prevent osteogenesis. In this study, the pure chitosan solution, which was obtained by purifying chitosan, was used. However, since this chitosan is of a liquiform, it is difficult to sustain it in a defective region. It is, therefore, essential to use a carrier for delivering chitosan to, and sustaining it gradually in the defective region. In the calvarial defect model of the Sprague-Dawley rat, it is relatively easy to maintain a space. Therefore, in this study, the chitosan solution with which ACS was wetted was grafted onto the defective region, For an experimental model, a calvarial defect of rat m s selected, and a critical size of the defective region was a circular defect with a diameter of 8 mm. A group in which no treatment was conducted for the calvarial defect was set as a negative control group. Another group in which treatment was conducted with ACS only was set as a positive control group (ACS group). And another group in which treatment was conducted was conducted with by grafting the pure chitosan solution onto the defective region through ACS which was wetted with the chitosan solution was set an experimental group (Chitosan/ACS group). Chitosan was applied to the Sprague-Dawley rat's calvarial bone by applying ACS which was wetted with the chitosan solution, and each Sprague-Dawley rat was sacrificed respectively 2 weeks and 8 weeks after the operation for such application. Then, the treatment results were compared and observed histologically and his tometrically. Thereby, the following conclusions were obtained. 1. In the experimental group, a pattern was shown that from 2 weeks after the operation, vascular proliferation proceeded and osteogenesis proceeded through osteoblast infiltration, and at 8 week after the operation, ACS was almost absorbed, the amount of osteogensis was increased and many osteoid tissue layers were observed. 2. At 2 weeks after the operation, each amount of osteogenesis appeared to be 8.70.8 %, 13.62.3 % and 4.80.7 % respectively in the experimental group, the positive control group and the negative control group. Accordingly, it appeared to be higher in the Experimental group and the positive control group than in the negative control group, but there was no significant difference statistically (p<0.01). 3. At 8 weeks after the operation, each amount of osteogenesis appeared to be 62.26.1%, 17.42.5 % and 8.21.4 % respectively in the experimental group, the positive control group and the negative control group. Accordingly, it appeared to be substantially higher in the experimental group than in the positive control group and the negative control group, and there was a significant difference statistically (p<0.01). As a result of conducting the experiment, when ACS was used as a carrier for chitosan, chitosan showed effective osteogenesis in the perforated defective region of the Sprague-Dawley rat's calvarial bone.