• Geophysics and Geophysical Exploration
• /
• v.8 no.1
• /
• pp.67-72
• /
• 2005

To investigate the feasibility of a new concept of storing Liquefied Natural Gas (LNG) in a lined hard rock cavern, and to develop essential technologies for constructing underground LNG storage facilities, a small pilot plant storing liquid nitrogen (LN2) has been constructed at the Korea Institute of Geoscience and Mineral Resources (KIGAM). The LN2 stored in the cavern will subject the host rock around the cavern to very low temperatures, which is expected to cause the development of an ice ring and the change of ground condition around the storage cavern. To investigate and monitor changes in ground conditions at this pilot plant site, geophysical, hydrogeological, and rock mechanical investigations were carried out. In particular, geophysical methods including borehole radar and three-dimensional (3D) resistivity surveys were used to identify and monitor the development of an ice ring, and other possible changes in ground conditions resulting from the very low temperature of LN2 in the storage tank. We acquired 3D resistivity data before and after storing the LN2, and the results were compared. From the 3D images obtained during the three phases of the resistivity monitoring survey, we delineated zones of distinct resistivity changes that are closely related to the storage of LN2. In these results, we observed a decrease in resistivity at the eastern part of the storage cavern. Comparing the hydrogeological data and Joint patterns around the storage cavern, we interpret this change in resistivity to result from changes in the groundwater flow pattern. Freezing of the host rock by the very low temperature of LN2 causes a drastic change in the hydrogeological conditions and groundwater flow patterns in this pilot plant.

• Geophysics and Geophysical Exploration
• /
• v.14 no.1
• /
• pp.80-87
• /
• 2011

Autonomous underwater vehicles (AUVs) present the important advantage of being able to approach the seafloor more closely than surface vessel surveys can. To collect bathymetric data, bottom material information, and sub-surface images, multibeam echosounder, sidescan sonar (SSS) and subbottom profiler (SBP) equipment mounted on an AUV are powerful tools. The 3000m class AUV URASHIMA was developed by the Japan Agency for Marine-Earth Science and Technology (JAMSTEC). After finishing the engineering development and examination phase of a fuel-cell system used for the vehicle's power supply system, a renovated lithium-ion battery power system was installed in URASHIMA. The AUV was redeployed from its prior engineering tasks to scientific use. Various scientific instruments were loaded on the vehicle, and experimental dives for science-oriented missions conducted from 2006. During the experimental cruise of 2007, high-resolution acoustic images were obtained by SSS and SBP on the URASHIMA around the northern Kumano Basin off Japan's Kii Peninsula. The map of backscatter intensity data revealed many debris objects, and SBP images revealed the subsurface structure around the north-eastern end of our study area. These features suggest a structure related to the formation of the latest submarine fan. However, a strong reflection layer exists below ~20 ms below the seafloor in the south-western area, which we interpret as a denudation feature, now covered with younger surface sediments. We continue to improve the vehicle's performance, and expect that many fruitful results will be obtained using URASHIMA.

• Geophysics and Geophysical Exploration
• /
• v.11 no.1
• /
• pp.1-14
• /
• 2008

We present a method for interpreting seismic records with arrivals and waveforms having characteristics which could be generated by extremely inhomogeneous velocity structures, such as non-typical oceanic crust, decollement at subduction zones, and seamounts in oceanic regions, by comparing them with synthetic waveforms. Recent extensive refraction and wide-angle reflection surveys in oceanic regions have provided us with a huge number of high-resolution and high-quality seismic records containing characteristic arrivals and waveforms, besides first arrivals and major reflected phases such as PmP. Some characteristic waveforms, with significant later reflected phases or anomalous amplitude decay with offset distance, are difficult to interpret using only a conventional interpretation method such as the traveltime tomographic inversion method. We find the best process for investigating such characteristic phases is to use an interactive interpretation method to compare observed data with synthetic waveforms, and calculate raypaths and traveltimes. This approach enables us to construct a reasonable structural model that includes all of the major characteristics of the observed waveforms. We present results here with some actual observed examples that might be of great help in the interpretation of such problematic phases. Our approach to the analysis of waveform characteristics is endorsed as an innovative method for constructing high-resolution and high-quality crustal structure models, not only in oceanic regions, but also in the continental regions.

• Geophysics and Geophysical Exploration
• /
• v.8 no.3
• /
• pp.224-231
• /
• 2005

In geophysical field surveys, commercial equipments often fail to resolve the subsurface target or even sometimes fail to be applied because they do not fit to the various field situations or the physical properties of the medium or target. We developed a geophysical measurement system, which can be easily adapted for the various field situations and targets. The system based on PXI with A/D converter and some stand alone equipment such as Network Analyzer was applied to borehole radar survey, borehole sonic measurement and electromagnetic noise measurement. The system for borehole radar survey consists of PXI, Network Analyzer, dipole antennas, GPIB interface is used for PXI to control Network Analyzer. The system for borehole sonic measurement consists of PXI, 24 Bit A/D converter, high voltage pulse generator, transmitting and receiving piezoelectric sensors. The electromagnetic noise measurement system consists of PXI, 24 Bit A/D converter, 2 horizontal component electric field sensors and 2 horizontal and 1 vertical component magnetic filed sensors. The borehole radar system has been successfully applied to detect the width of the artificial tunnel through which the borehole pass and to image buried steel pipe, while the commercial borehole radar equipment failed. The borehole sonic system was tested to detect the width of artificial tunnel and showed a reasonable result. The characteristic of electromagnetic noise was grasped at an urban area with the data from the electromagnetic noise measurement system. The system is also applied to characterize the signal distortion by induction between the electric cables in resistivity survey. The system can be applied various geophysical problems with a simple modification of the system and sensors.

• Journal of the Korean earth science society
• /
• v.21 no.4
• /
• pp.408-422
• /
• 2000

Multiple geophysical methods were applied over the Manjang cave area in Cheju Island to compare and contrast the effectiveness of each method for exploration of underground cavities. The used methods are gravity, magnetic, electrical resistivity and GPR(Ground Pentrating Radar) survey, of which instruments are portable and operations are relatively economical. We have chosen seven survey lines and applied appropriate multiple surveys depending on the field conditions. In the case of magnetic method. two-dimensional grid-type surveys were carried out to cover the survey area. The geophysical survey results reveal the characteristic responses of each method relatively well. Among the applied methods, the electric resistivity methods appeared to be the most effective ones in detecting the Manjang Cave and surrounding miscellaneous cavities. Especially, on the inverted resistivity section obtained from the dipole-dipole array data, the two-dimensional distribution of high resistivity cavities are revealed well. The gravity and magnetic data are contaminated easily by various noises and do not show the definitive responses enough to locate and delineate the Manjang cave. But they provide useful information in verifying the dipole-dipole resistivity survey results. The grid-type 2-D magnetic survey data show the trend of cave development well, and it may be used as a reconnaissance regional survey for determining survey lines for further detailed explorations. The GPR data show very sensitive response to the various shallow volcanic structures such as thin spaces between lava flows and small cavities, so we cannot identify the response of the main cave. Although each geophysical method provides its own useful information, the integrated interpretation of multiple survey data is most effective for investigation of the underground caves.

• Journal of Global Scholars of Marketing Science
• /
• v.17 no.4
• /
• pp.1-22
• /
• 2007

Customer satisfaction is important in an increasingly competitive and global marketplace. This implies that customer service is a critical factor for many organizations. In service encounter context, customer satisfaction is affected by employees' attitudes and behaviors. Accordingly, service firms have been focusing on selecting high quality of service employees, which resulted the ability to identify and select quality service- or customer- oriented employees to become critical for an organization's success. It was suggested that customer service orientation links to performance and subsequent organizational revenue. Moreover, it was found that service encounter failures were among the major reasons for customers' service switch. Therefore, the selection of customer service oriented employees is a key factor in establishing customer service - a potential source of sustained competitive advantage. However, the measurement of employee service orientation is more confusing than that of definitive answers. The difficulty of measuring service orientation is attributed to the use of broad versus narrow measures of personality. Advocates for the broad perspective prefer using basic personality constructs, such as the Big Five personality traits. On the contrary, the latter prefer a construct-oriented approach of personality research that provides a better measure of job performance because it requires the specification of the relationship of the personality traits with multiple dimensions of job performance. The customer service orientation was defined as "a set of basic individual predispositions and an inclination to provide service, to be courteous and to be helpful in dealing with customers and associates." Similarly, it is a fact that the Big five personality traits are predictors of customer orientation, and employee's self- and supervisor performance. They propose that basic personality traits may be too far removed from focal service behaviors to be able to predict specific service behaviors (customer orientation) and service worker performance. Also, customer orientation is defined as "an employee's tendency or predisposition to meet customer needs in an on-the-job context." This means that people who have job-relevant personality traits such as concern, empathy, and conscientiousness will be more adept at customer service than people who do not possess these traits. However, little attention has been given to the exploration of the service orientation of customer-contact employees who play a key role in creating satisfactory service encounters in the hospitality industry except for Kim, McCahon, & Miller (2003)'s study, especially in family restaurants context. Thus, the purposes of this study are to examine and validate the customer service orientation of customer-contact employees using the instrument developed by Donavan (1999) in Korean family restaurants, because the scale was developed to measure the personality traits related job behaviors. And this study explores the relationships between customer service orientation, job satisfaction, organizational commitment, and self service performance using structural equation modeling (SEM). And this study explores the relationships between customer service orientation, job satisfaction, organizational commitment, and self service performance using structural equation modeling (SEM). For these purposes the author developed several hypotheses as follows: H1: Employee's service orientation is associated with service performance. H2: Employee's service orientation is positively associated with job satisfaction. H3: Employee's service orientation is positively associated with organizational commitment. H4: Service performance is positively associated with job satisfaction. H5: Service performance is positively associated with organizational commitment. H6: Job satisfaction is negatively associated with organizational commitment. The data were collected from 278 employees in 5 deluxe hotels located in Pusan, Korea. The researcher contacted the manager of the restaurants, and managers consented to administer surveys to their employees. The survey was executed during one month period in the October of 2007. The data were analyzed with structural equation modeling with LISREL 8.7 W. The result of the overall model analysis appeared as follows: $X^2$=122.638 (p = 0.00), df=59, GFI=.936, AGFI=.901, NFI=.948, CFI=.971, RMSEA=.0625. Since the result of the overall model analysis demonstrated a good fit, we could further analyze our data. The findings can be summarized as follows: First, the greater the employee service orientation, the greater the service performance. Second, the greater the employee service orientation, the greater the job satisfaction. Third, the greater the employee service orientation, the greater the organizational commitment. Fourth, the greater the service performance, the greater the job satisfaction. Fifth, the greater the service performance, the greater the organizational commitment. Finally, the greater the job satisfaction, the greater the organizational commitment. Seventh, the greater the customer satisfaction, the greater the customer loyalty.

• Economic and Environmental Geology
• /
• v.54 no.2
• /
• pp.177-186
• /
• 2021

For disaster management and mitigation of earthquakes in Korea Peninsula, active fault investigation has been conducted for the past 5 years. In particular, investigation of sediment-covered active faults integrates geomorphological analysis on airborne LiDAR data, surface geological survey, and geophysical exploration, and unearths subsurface active faults by trench survey. However, the fault traces revealed by trench surveys are only available for investigation during a limited time and restored to the previous condition. Thus, the geological data describing the fault trench sites remain as the qualitative data in terms of research articles and reports. To extend the limitations due to temporal nature of geological studies, we utilized a terrestrial LiDAR to produce 3D point clouds for the fault trench sites and restored them in a digital space. The terrestrial LiDAR scanning was conducted at two trench sites located near the Yangsan Fault and acquired amplitude and reflectance from the surveyed area as well as color information by combining photogrammetry with the LiDAR system. The scanned data were merged to form the 3D point clouds having the average geometric error of 0.003 m, which exhibited the sufficient accuracy to restore the details of the surveyed trench sites. However, we found more post-processing on the scanned data would be necessary because the amplitudes and reflectances of the point clouds varied depending on the scan positions and the colors of the trench surfaces were captured differently depending on the light exposures available at the time. Such point clouds are pretty large in size and visualized through a limited set of softwares, which limits data sharing among researchers. As an alternative, we suggested Potree, an open-source web-based platform, to visualize the point clouds of the trench sites. In this study, as a result, we identified that terrestrial LiDAR data can be practical to increase reproducibility of geological field studies and easily accessible by researchers and students in Earth Sciences.

• Korean Journal of Heritage: History & Science
• /
• v.51 no.2
• /
• pp.22-37
• /
• 2018

Unmanned aerial vehicles (UAV) have attracted considerable attention both at home and abroad. The UAV is equipped with a camera that shoots images, which is advantageous for access to areas where archaeological investigations are not possible. Moreover, it is possible to acquire three-dimensional spatial image information by modeling the terrain through aerial photographing, and it is possible to specify the interpretation of the terrain of the survey area. In addition, if we understand the change of the terrain through comparison with past aerial photographs, it will be very helpful to grasp the existence of the ruins. The terrain modeling for searching these remains can be divided into two parts. First, we acquire the aerial photographs of the current terrain using the drone. Then, using image registration and post-processing, we complete the image-joining and terrain-modeling using past aerial photographs. The completed modeled terrain can be used to derive several analytical results. In the present terrain modeling, terrain analysis such as DSM, DTM, and altitude analysis can be performed to roughly grasp the characteristics of the change in the form, quality, and micro-topography. Past terrain modeling of aerial photographs allows us to understand the shape of landforms and micro-topography in wetlands. When verified with actual findings and overlapping data on the modelling of each terrain, it is believed that changes in hill shapes and buried Microform can be identified as helpful when used in low-flying applications. Thus, modeling data using aerial photographs is useful for identifying the reasons for the inability to carry out archaeological surveys, the existence of terrain and ruins in a wide area, and to discuss the preservation process of the ruins. Furthermore, it is possible to provide various themes, such as cadastral maps and land use maps, through comparison of past and present topographical data. However, it is certain that it will function as a new investigation methodology for the exploration of ruins in order to discover archaeological cultural properties.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.36 no.3
• /
• pp.16-25
• /
• 2018

Initially from the Taoist scriptures, 'Dongcheon' is a term that can be regarded as a symbolic place in the real world for the enlightened ones who received relief and peace by restoring the human nature taught in the Confucian school. The long for an ideal world apart from the reality embodied as the labeling some places 'Dongcheon,' and the term was used to refer to a scenery where the ideal fairyland is reproduced. Besides, 'Dongcheon' was a term often used by Confucian scholars for various purposes including the attachment to the nearby landscapes, expressing homogeneity and superiority through placeness and the beautification of settlement spaces. This paper is the result of a field study on 'Dongcheon' in the Gyeongsang-Do. The research was conducted from March to August 2018, and we carried out firsthand location surveys on Dongcheons, of which some were lost, others were fairly preserved, and still others could not be located as only their existences were passed down orally. According to the field survey, there were total 111 inscriptions or engravings on the plates in Gyeongsang-Do that include the term 'Dongcheon.' There were 79 'Dongcheon' inscriptions confirmed in the Gyeongsangbuk-Do region: twenty in Yeongju-City, sixteen in Bonghwa-Gun, eleven in Andong-City and seven in Yeongyang-Gun and Ulgin-Gun. Among them, two were in the form of a wooden sign, and six were erected as rock signposts. Fourteen stops reported in the literature were lost or unidentified. Also, among the sixteen signs in Bonghwa-Gun, nine were cursive engravings. Meanwhile, there were 26 Dongcheon inscriptions in the Gyeongsangnam-Do region. Hamyang-Gun and Sancheong-Gun anf Hadong-Gun each housed three inscriptions, and seven places were in the form of rock signposts. 'Hwagaedongcheon' and 'Geumsandongcheon' could not be identified in inscriptions although they appear in Jibong Yuseol and Taengniji with stories of Choi Chiwon. The significance of this study is as a reference for future researches in traditional scenery, epigraphs, or as primary data that helps cultural exploration in the region.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2002.09a
• /
• pp.139-162
• /
• 2002

Since weak zones or geological lineaments are likely to be eroded, weak zones may develop beneath rivers, and a careful evaluation of ground condition is important to construct structures passing through a river. Dc resistivity surveys, however, have seldomly applied to the investigation of water-covered area, possibly because of difficulties in data aquisition and interpretation. The data aquisition having high quality may be the most important factor, and is more difficult than that in land survey, due to the water layer overlying the underground structure to be imaged. Through the numerical modeling and the analysis of case histories, we studied the method of resistivity survey at the water-covered area, starting from the characteristics of measured data, via data acquisition method, to the interpretation method. We unfolded our discussion according to the installed locations of electrodes, ie., floating them on the water surface, and installing at the water bottom, since the methods of data acquisition and interpretation vary depending on the electrode location. Through this study, we could confirm that the dc resistivity method can provide the fairly reasonable subsurface images. It was also shown that installing electrodes at the water bottom can give the subsurface image with much higher resolution than floating them on the water surface. Since the data acquired at the water-covered area have much lower sensitivity to the underground structure than those at the land, and can be contaminated by the higher noise, such as streaming potential, it would be very important to select the acquisition method and electrode array being able to provide the higher signal-to-noise ratio data as well as the high resolving power. The method installing electrodes at the water bottom is suitable to the detailed survey because of much higher resolving power, whereas the method floating them, especially streamer dc resistivity survey, is to the reconnaissance survey owing of very high speed of field work.