• Nuclear Engineering and Technology
• /
• v.51 no.1
• /
• pp.155-162
• /
• 2019

To reduce the secondary damage caused by leakage accidents in plant piping systems, a constant surveillance system is necessary. To ensure leaks are promptly addressed, the surveillance system should be able to detect not only the leak itself, but also the location of the leak. Recently, research to develop new methods has been conducted using cameras to detect leakage and to estimate the location of leakage. However, existing methods solely estimate whether a leak exists or not, or only provide two-dimensional coordinates of the leakage location. In this paper, a method using multiple cameras to detect leakage and estimate the three-dimensional coordinates of the leakage location is presented. Leakage is detected by each camera using MADI(Moving Average Differential Image) and histogram analysis. The two-dimensional leakage location is estimated using the detected leakage area. The three-dimensional leakage location is subsequently estimated based on the two-dimensional leakage location. To achieve this, the coordinates (x, z) for the leakage are calculated for a horizontal section (XZ plane) in the monitoring area. Then, the y-coordinate of leakage is calculated using a vertical section from each camera. The method proposed in this paper could accurately estimate the three-dimensional location of a leak using multiple cameras.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.32 no.2
• /
• pp.153-162
• /
• 2014

As CCTVs are widely utilized in diverse fields, many researchers have continuously studied to improve the surveillance performances of a CCTV system. However, an quantitative evaluation approach about the surveillance performance has rarely been researched. Therefore, we set up the research for suggesting a quantitative evaluation approach to determine the effectiveness of CCTV coverages. We firstly defined the surveillance resolution as that varies according to object's positions and orientations. Based on the definition, we computed surveillance resolution values at all three-dimensional positions with the orientations of interests in the specified space. By comparing these values to the required reasonable resolution, we determined the surveillance performance index indicating how well a CCTV system monitor a target space for specific surveillance objectives. This proposed approach evaluates the surveillance performance of a CCTV system quantitatively, so as examines the CCTV system design before its installation based on precise 3D spatial analysis.

• Journal of IKEEE
• /
• v.20 no.2
• /
• pp.128-135
• /
• 2016

Smart care surveillance system provides the services to track users automatically by using the nearest CCTV cameras which are capable of monitoring them after the system searches for CCTV cameras around them by using the GPS location information received from them. Because users send their GPS location information with using their smart device when they are in emergency situation or want to be cared for, they may expect quick response of helper in this system. However, in the previous system, the selection time of camera which is capable of monitoring is increased rapidly as the management area is expended because the area management server selects the camera by sorting the distance between all of CCTV cameras and users, and then monitors them whenever they send the location information. In this paper, we propose the method to reduce the selection time of the CCTV cameras for tracking the users by searching only the cameras near to the CCTV cameras used to track them.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.28 no.9
• /
• pp.99-104
• /
• 2014

This paper presents a unified live-streaming method based on Hypertext Mark-up Language 5(HTML5) for an IP camera which is independent of browsers of clients and is implemented with open-source libraries. Currently, conventional security systems based on analog CCTV cameras are being modified to newer surveillance systems utilizing IP cameras. These cameras offer remote surveillance and monitoring regardless of the device being used at any time, from any location. However, this approach needs live-streaming protocols to be implemented in order to verify real-time video streams and surveillance is possible after installation of separate plug-ins or special software. Recently, live streaming is being conducted through HTML5 using two different standard protocols: HLS and DASH, that works with Apple and Android products respectively. This paper proposes a live-streaming approach that is linked on either of the two protocols which makes the system independent with the browser or OS. The client is possible to monitor real-time video streams without the need of any additional plug-ins. Moreover, by implementing open source libraries, development costs and time were economized. We verified usefulness of the proposed approach through mobile devices and extendability to other various applications of the system.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.8 no.10
• /
• pp.3475-3489
• /
• 2014

Here we present a simple flame detection method for an infrared (IR) thermal camera based real-time fire surveillance digital signal processor (DSP) system. Infrared thermal cameras are especially advantageous for unattended fire surveillance. All-weather monitoring is possible, regardless of illumination and climate conditions, and the data quantity to be processed is one-third that of color videos. Conventional IR camera-based fire detection methods used mainly pixel-based temporal correlation functions. In the temporal correlation function-based methods, temporal changes in pixel intensity generated by the irregular motion and spreading of the flame pixels are measured using correlation functions. The correlation values of non-flame regions are uniform, but the flame regions have irregular temporal correlation values. To satisfy the requirement of early detection, all fire detection techniques should be practically applied within a very short period of time. The conventional pixel-based correlation function is computationally intensive. In this paper, we propose an IR camera-based simple flame detection algorithm optimized with a compact embedded DSP system to achieve early detection. To reduce the computational load, block-based calculations are used to select the candidate flame region and measure the temporal motion of flames. These functions are used together to obtain the early flame detection algorithm. The proposed simple algorithm was tested to verify the required function and performance in real-time using IR test videos and a real-time DSP system. The findings indicated that the system detected the flames within 5 to 20 seconds, and had a correct flame detection ratio of 100% with an acceptable false detection ratio in video sequence level.

• The Journal of Korean Institute for Practical Engineering Education
• /
• v.2 no.1
• /
• pp.84-88
• /
• 2010

Recently, it is essential to have the system which can track down and identity the random object in the space in which security is a high priority. Due to the fact that we mentioned above, in this paper. We suggest the intelligent video surveillance system effective image-process-education in this paper. The experiment was conducted to check and track down the entering vehicle. And, Pan-Tilt-Zoom camera was used to obtain the enlarged image of the object while a vehicle was making stop in target area. As a result, the experiment has shown the data as following. When the object is in motion, success rate is 97.4%, while success rate is 91% when the object is motionless. By using the suggested system, effective image-process-education is should be achieved because the students who participate in the class can have simultaneous access to the system for real time image data and camera control.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.45 no.10
• /
• pp.66-74
• /
• 2008

Surveillance system using active tracking camera has no distance limitation of surveillance range compared to supersonic or sound sensors. However, complex motion tracking algorithm requires huge amount of computation. Compared to conventional methods using DSPs or embedded processors, this paper proposes and implements a novel motion tracker unit that detects and extracts motion information of moving objects by using picture difference of consecutive frames. The proposed motion tracker unit was implemented in FPGA with about 13,000 gates. It processes NTSC format video and was verified by embedding it into the active surveillance camera system. We also propose and implements a motion estimator unit linkable to video codec by embedding the proposed motion tracker unit into ready-made motion estimator unit. The implemented motion estimator unit is about 17,000 gates in $0.35{\mu}m$ process.

• Journal of Digital Convergence
• /
• v.11 no.10
• /
• pp.359-366
• /
• 2013

Due to the development and market expansion of image analysis and recognition technology, video security such as CCTV cameras and digital storage devices, are required for real-time monitoring systems and intelligent video security systems. This includes the development of more advanced technologies. A rotatable PTZ camera, in a CCTV camera system, has a zoom function so you can acquire a precise picture. However it can cause blind spots, and can not monitor two or more moving objects at the same time. This study concerns, the intelligent tracking of multiple moving objects, CCTV systems, and methods of video surveillance. An intelligent video surveillance system is proposed. It can accurately shoot broad areas and track multiple objects at the same time, much more effectively than using one fixed camera for an entire area or two or more PTZ cameras.

• Journal of Broadcast Engineering
• /
• v.24 no.5
• /
• pp.802-812
• /
• 2019

With the rapid development in the field of unmanned aerial vehicles(UAVs) and drones, higher request to development of a surveillance system for a drone is putting forward. Since surveillance systems with fixed cameras have a limited range, a development of surveillance systems with a moving camera applicable to PTZ(Pan-Tilt-Zoom) cameras is required. Selecting the features for object plays a critical role in tracking, and the object has to be represented by their shapes or appearances. Considering these conditions, in this paper, an object tracking method with optical flow is introduced to track a tiny drone with a moving camera. In addition, a tracking method combined with kalman filter is proposed to track continuously even when tracking is failed. Experiments are tested on sequences which have a target from the minimal 12 pixels to the maximal 56337 pixels, the proposed method achieves average precision of 175% improvement. Also, experimental results show the proposed method tracks a target which has a size of 12pixels.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.23 no.9
• /
• pp.1060-1069
• /
• 2019

Pedestrian-based camera self-calibration methods are suitable for video surveillance systems since they do not require complex calibration devices or procedures. However, using arbitrary pedestrians as calibration targets may result in poor calibration accuracy due to the unknown height of each pedestrian. To solve this problem in the real surveillance environments, this paper proposes a novel Bayesian approach. By assuming known statistics on the height of pedestrians, we construct a probabilistic model that takes into account uncertainties in both the foot/head locations and the pedestrian heights, using foot-head homology. Since solving the model directly is infeasible, we use variational Bayesian inference, an approximate inference algorithm. Accordingly, this makes it possible to estimate the height of pedestrians and to obtain accurate camera parameters simultaneously. Experimental results show that the proposed algorithm is robust to noise and provides accurate confidence in the calibration.