• Elastomers and Composites
• /
• 제49권2호
• /
• pp.134-143
• /
• 2014

자가치유형 아스팔트를 구현하기 위하여 분자간결합력이 큰 고분자를 아스팔트에 투입시켰다. 사용된 고분자는 셜린, 나일론 및 폴리에스터이다. 이 고분자들은 가공온도가 $200^{\circ}C$를 넘어 고체상태로는 투입이 어려워 용액상태로 첨가하였다. 고분자가 첨가된 아스팔트들은 우수한 개질효과와 치유효과를 나타내었다. 인장강도에서 고분자개질아스팔트들은 고분자가 5% 투입되었으나 강도는 18%이상 증가하였다. 고분자와 아스팔트분자 간에 상호작용이 있는 것으로 보인다. 특히 셜린과의 분자간결합력이 가장 큰 것으로 보인다. 셜린은 아스팔트와 수소결합 및 아스팔트내에 존재하는 금속들과 이온결합을 할 것이다. 치유성에 있어서는 인장강도 면에서 셜린이 가장 높은 138%의 치유능을 나타내었으며 복합모듈러스 면에서는 폴리에스터가 141%의 치유능을, 충격강도 면에서는 나일론이 131%의 치유능을 보였다. 이는 치유능 해석에서 고분자의 분자간결합력도 중요 사항이지만 고분자와 아스팔트간의 상호작용 또한 중요한 고려 사항이 되어야함을 의미한다.

• 한국섬유공학회:학술대회논문집
• /
• 한국섬유공학회 1992년도 제1차 학술발표초록집
• /
• pp.35-35
• /
• 1992

• 대한전기학회논문지
• /
• 제40권8호
• /
• pp.808-815
• /
• 1991

The behavior of space charge in PE/ionomer blends has been investigated using the thermally stimulated current (TSC) technique. In the blends, at least two TSC peaks over the temperature range from -50 to 100\ulcorner are observed, one at -5 ~ 10\ulcorner (a peak) and the others at above 60\ulcorner (a peak). The a peak is assigned as the orientation of dipoles from the ionomer component. Two a peaks seem to be related to the charge trapping at sites related to the crystalline phases. One a peak is associated with the ionic interfaces and the other with the ethylene chains without the ionic interfaces. The amount of charges stored in PE/Surlyn 1652 blends increases as the poling field increases over the field range of +8 ~ +30 kV/mm, whereas that in PE/Surlyn 1601 blends increases slightly at low poling fields and then decreases at high poling fields above +10 kV/mm. Exact reasons for such a dirrerence are not known at this point.

• 한국고분자학회:학술대회논문집
• /
• 한국고분자학회 2006년도 IUPAC International Symposium on Advanced Polymers for Emerging Technologies
• /
• pp.367-367
• /
• 2006

With poly (ethylene-co-methacrylic acid) ionomer (i.e. Surlyn) as a compatibilizer, PP/organoclay (Cloisite(R)20A) nanocomposites were prepared via melt compounding in a co-rotating twin-screw extruder. For comparison, the widely used PP-g-MA was also used as a reference. The content of organoclay was fixed at 5phr based on the total weight of polymer resins. The structures of nanocomposites were characterized by XRD, rheometry in small amplitude oscillatory shear, SEM, and TEM, respectively. It was found that PP/Surlyn/OMMT nanocomposites displayed higher intercalation degree and better dispersion effect than the corresponding PP/PP-g-MA/OMMT counterpart. Additionally, their mechanical properties and wettability were measured.

• 한국전기전자재료학회논문지
• /
• 제26권3호
• /
• pp.209-215
• /
• 2013

DSSCs electrical characteristics and efficiency fabricated with different tape casting thickness Pt counter electrodes and different thickness between $TiO_2$ photo electrode and Pt counter electrode substrate were studied. 1 layer Pt counter electrode shows 3.979% efficiency. Efficiency increased as tape casting thickness decreased. The lowest open-circuit voltage was a 0.726 V and the highest short-circuit current was a 2.188 mA on 1 layer Pt counter electrode. On the different thickness between two substrates, the lowest open-circuit voltage 0.712 V and the highest short-circuit current 2.787 mA was measured at $60{\mu}m$ surlyn film thickness and it shows the highest value of 5.067% efficiency.

• 한국고분자학회:학술대회논문집
• /
• 한국고분자학회 2006년도 IUPAC International Symposium on Advanced Polymers for Emerging Technologies
• /
• pp.280-280
• /
• 2006

Na-bentonite (local clay mineral) and Na-montmorillonite were treated with quaternary alkylammonium cations. The effect of the molecular structure and functional groups of the surfactants on the organoclays was investigated by X-ray diffraction (XRD). For the preparation of nanocomposites, organoclays were melt-blended with polypropylene in a twin screw extruder and $Surlyn^{(R)$. ionomer was used as a reactive compatibilizer. The clay dispersions in the composites were investigated by X-ray diffraction (XRD). XRD spectra showed no peak at low angle indicated that the silicate clay layer has a nearly exfoliated dispersion in the polymer matrix. Thermal and mechanical properties of nanocomposites were higher than those of PP.

• Macromolecular Research
• /
• 제12권1호
• /
• pp.53-62
• /
• 2004

We have prepared polymer composites of low-density polyethylene (LDPE) and ionomers (Surlyn 8940) containing polar segments and metal ions by melt blending with carbon black (CB) as a conductive filler. The resistivity and positive temperature coefficient (PTC) of the ionomer/LDPE/CB composites were investigated with respect to the CB content. The ionomer content has an effect on the resistivity and percolation threshold of the polymer composites; the percolation curve exhibits a plateau at low CB content. The PTC intensity of the crosslinked ionomer/LDPE/CB composite decreased slightly at low ionomer content, and increased significantly above a critical concentration of the ionomer. Irradiation-induced crosslinking could increase the PTC intensity and decrease the NTC effect of the polymer composites. The minimum switching current (Ι$\sub$trip/) of the polymer composites decreased with temperature; the ratio of Ι$\sub$trip/ for the ionomer/LDPE/CB composite decreased to a greater extent than that of the LDPE/CB composite. The average temperature coefficient of resistance (${\alpha}$$\sub$T/) for the polymer composites increased in the low-temperature region.

• 폴리머
• /
• 제25권5호
• /
• pp.671-678
• /
• 2001

Sodium 또는 zinc로 중화된 poly(ethylene-co-methacrylic acid)의 아이오노머는 ethylene 사슬 부분들로만 이루어진 결정상, acid 그룹이 존재하는 amorphous 영역, 그리고 ionic aggregate의 세 가지 상으로 나누어진다. Soaking에 의하여 흡수된 nonionic dye 분자들은 결정상을 제외한 amorphous 부분이나 ionic aggregate 분근에 존재하는데, 주위 사슬의 극성에 따라 dispersion force (ethylene 사슬 부분), polar force (acid 부분), ionic dipole (ionic aggregate 부분)의 세 가지 다른 힘의 영향 아래 놓이게 된다. 극성이 적은 ethylene 사슬부분의 dispersion force 영향 아래에 존재하는 Nile Red의 UV/Vis 흡수피크는 500nm 부근에서, polar한 acid 그룹의 영향을 받는 dye 피크는 525 nm, 그리고 ionic aggregate의 영향에 의한 dye는 Na+-아이오노머의 경우 550 nm, divalent이어서 더 큰 ionic dipole을 가지는 $Zn^{2+}$-아이오노머의 경우 610nm에서 각각 피크가 나타났다.