• Journal of the Korea institute for structural maintenance and inspection
• /
• v.13 no.5 s.57
• /
• pp.169-179
• /
• 2009

The purpose of this paper is to find an efficient heat source to amplify the surface temperature of damaged concrete structures for infrared thermography. we compare two different heat sources of far-infrared lamp and halogen lamp each other for their efficiency. The two heat sources were applied to the concrete specimens. Two different concrete specimens were used: one was the concrete containing internal void and the other was wrapped with partially unbonded fiber reinforced polymer sheet. it was found that the far-infrared lamp was more efficient than the halogen lamp. In addition, we propose a new algorithm to make the damage zone displayed clear in the image obtained from the thermographic operation. The algorithm is a combination of Gauss filtering process and the Prewitt mask operation.

• Korean Journal of Heritage: History & Science
• /
• v.56 no.3
• /
• pp.138-156
• /
• 2023

Some of the metal cultural heritage that make up a considerable proportion of Korea's cultural heritage have been installed and displayed outdoors due to their own functions, roles, and scale. Therefore, more diverse and complex damages can occur outdoors than they are in a stable environment. Therefore, it is necessary to combine accurate diagnosis and systematic survey methods in order to utilize basic data obtained from research results as data for the long-term and continuous conservation management as well as to do the research to diagnose the conservation status of outdoor cultural heritage. The clepsydra(hereinafter referred to as Jagyeongnu) of Changgyeonggung Palace, the National Treasure has been installed and displayed outdoors since it was manufactured. Though regular conservation and maintenance of the Jagyeongnu have been carried out, damage still occurred. Therefore, the scientific research on Jagyeongnu to diagnose the state of conservation was conducted prior to the full-scale conservation treatment. First, the state of conservation was investigated with an examination of basic data, macroscopic inspections and past records of repair history according to the purpose of the research. More detailed examinations were also conducted through the 3D scan, surface pattern investigation, and color difference analysis, and the analysis on materials and contaminants were conducted through P-XRF, FT-IR, and Py-GC/MS. The scientific research reveals that squalane and silicone oil have been applied in the past for conservation treatment and directly exposed to outdoor environmental factors, which caused damage to Jagyeongnu and contaminants such as dust adhered thickly to its surface, accelerating severe damage. A greater incidence of damage was found around the part with relatively high exposure effect, which corresponded with the tendency identified by grouping color difference data. As a result of integrating various research methodologies to diagnose the state of conservation and secure basic data, the causes and types of damage were identified. Furthermore, the process of obtaining digital data to be utilized in various ways, and the color difference analysis presenting visible damage as scientific data and identifying the tendency of damage patterns were confirmed to have been effective.

• Applied Chemistry for Engineering
• /
• v.18 no.3
• /
• pp.262-266
• /
• 2007

The effect of the presence of magnesium ions in the preparation of calcium phosphate (CP) thin films on the physicochemical and biological properties of the films has been investigated in this study. Five different surfaces were used and the culture plate (CTL) and CP film prepared in the absence of magnesium (CaP) were used for the comparison. Three different films were prepared at different magnesium concentrations. CP films prepared at the Mg concentrations of 0.1, 1, and 10 mM were designated as CaPL, CaPM, and CaPH, respectively. The observation of surface morphology of the CP films using scanning electron microscopy (SEM) displayed that the presence of magnesium affected considerably the morphology of the films including a decrease of surface porosity. X-ray diffraction (XRD) analysis for the determination of the crystallinity of the CP films showed that the structure of the films was amorphous. Examination using X-ray photoelectron spectroscopy (XPS) confirmed the prepared films consisted of calcium, phophorus, and magnesium. Cell adhesion assays elucidated that cell adhered less as the magnesium concentration increased. However, cell proliferation assays demonstrated that the cells proliferated more actively on the films prepared at the higher magnesium concentration. These results suggest that the presence of magnesium may promote the biocompatibility of CP films.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.23 no.4
• /
• pp.334-341
• /
• 2003

When the pressure tubes(f are in contact with the calandria tube(CT) in the pressurized heavy water reactor(PHWR), the temperature difference between inner and outer wall of W results in a thermal diffusion of hydrogen (deuterium) and hydride blisters are formed on the outer surface of PT. Because the hydride blisters and zirconium matrix are acoustically continuous, it is not easy to distinguish the blisters from the matrix with conventional ultrasonic method. An ultrasonic velocity ratio method was developed to detect small hydride blisters on the zirconium pressure tube. Hydride blisters were grown in the PT specimen using a steady state thermal diffusion device. The flight times of longitudinal echo and reflected shear echo from the outer surface were measured accurately. The velocity ratio of the longitudinal wave to the shear wave was calculated and displayed using contour plot. Compared to the conventional flight time method of longitudinal wave, the velocity ratio method shows superior sensitivity to detect smaller blisters as well as better images for the blister shapes. Detectable limit of the outer shape of the hydride blisters was conservatively estimated as $500{\mu}m$, with the same specifications of ultrasonic transducer used in the actual PHWR pressure tube inspection.

• Membrane Journal
• /
• v.28 no.1
• /
• pp.21-30
• /
• 2018

In this study, homogeneous and defect-free ceramic ultrafiltration membranes were fabricated by using the sol-gel method. A boehmite sol was synthesized and coated onto the surface of alumina hollow fiber microfiltration membranes. The effect of sol viscosity and surface tension on the coating layer homogeneity and thickness was investigated. The optimum coating repetition using pristine sol was determined to be 3 times, as the samples coated more than 4 times showed delamination. Fixing the coating repetition to 3 times, the effect of sintering temperature was also studied in this work. The samples sintered at $1000^{\circ}C$ exhibited the highest pure water permeability with the molecular weight cut-off (MWCO) of approximately 51 kDa (10 nm dextran), and the samples sintered at 600, $800^{\circ}C$ displayed the MWCO of 12 kDa (5 nm dextran). The ultrafiltration membranes prepared in this work showed competitive performance compared to the reported ceramic ultrafiltration membranes.

• Proceedings of the KSRS Conference
• /
• v.1
• /
• pp.174-179
• /
• 2006

Information on the distribution characteristics of tuna resources in Kiribati EEZ waters in three zones (Zone 1: west Gilbert region, Zone 2: central Phoenix region, and Zone 3: east Line region) as well as their relationship with the ocean environment is critical for sustainable managing the migratory tuna resource and fishing practices in this region. Therefore, this study is designed to investigate the spatial and temporal distribution and concentration of bigeye (BET) and yellowfin tuna (YFT) in Kiribati EEZ waters in relation to sea surface temperature (SST) and thermocline depth so as to better understand the tuna resources management basis in Kiribati waters. The geographic and temporal distribution and concentration were first displayed. Paired t-test was utilized to compare the distribution between the two tuna species based on Catch per Unit Effort (CPUE) derived from the Korean longliners during 1996 to 2004, and also among the three zones of Kiribati EEZ waters. Environmental conditions of the three zones were then compared and correlated with the CPUE of YFT and BET. In addition, the effect of ENSO phenomena on the environmental conditions and the distribution of YFT and BET within the three zones were also examined. The BET was relatively higher in the Zone 3 whereas YFT predominate in the Zone 1 and the Zone 2 due to oceanographic differences among the three zones and the ecological habitats of the two tuna species. It was suggested that El Ni?o/Southern Oscillation (ENSO) phenomena altered the oceanographic conditions of the three zones that in turn change the distribution of the two tuna species. During El Ni?o, the warm phase of ENSO, resulted in having more BET in all the three zones and the opposite observed during La Ni?a (cold phase) replacing by having relatively higher catch rate for YFT, particularly in the Zone 2. Although the results of the study are from short periods (1996 to 2004) in considering oceanographic anomality, these environmental variations should be considered into sustainable fisheries management of tuna fisheries in Kiribati EEZ waters.

• The Journal of Korean Academy of Prosthodontics
• /
• v.46 no.3
• /
• pp.255-260
• /
• 2008

STATEMENT OF PROBLEM: Preparation of implant beds with lasers is considered a safe and reliable method, but the accuracy of this technique has not been examined. PURPOSE: The purpose of this study was to evaluate the accuracy and effectiveness of implant bed preparation using an Er,Cr:YSGG laser. MATERIAL AND METHODS: An Er,Cr:YSGG laser was applied to pig rib bone. The laser was employed at a 5.75 W power setting, 30 Hz/sec pulse repetition, and 70 ${\mu}s$ pulse duration with 50 % water and 60% air spray. According to laser tips the groups were divided as follows; Group 1: paralleled - shaped sapphire tip (0.6 mm${\Phi}$), Group 2: paralleled - shaped zirconia tip (0.6 mm${\Phi}$), Group 3: tapered sapphire tip (0.4 mm${\Phi}$). The Er,Cr:YSGG laser tip was separated by 1 mm from the bone and applied for 15 seconds in a non-contact mode. After the application, the bone was sectioned for specimens. Histologic measurements were determined by computerized morphometry. The length of the prepared bone surface was measured and the width of the entrance was measured. The results were analyzed with one-way ANOVA (P<0.05). RESULTS: The prepared length of group 3 was longer than that of group 2. The prepared bone width was larger than the width of the laser tip in every group. Additional bone removal was observed adjacent to the prepared area and displayed an irregular surface. CONCLUSION & DISCUSSION: Different cutting effects were observed according to the laser tip, emphasizing the importance of proper tip selection in the clinical setting. This preliminary study supported the existence of hydrokinetic effects.

• Journal of Periodontal and Implant Science
• /
• v.23 no.2
• /
• pp.261-281
• /
• 1993

The author transplanted periodontally-diseased teeth which had been treated with citric acid into a clinically healthy extraction sockets and periodontally-affected extraction sockets, and compared with the healing processes within these tissues. Recipient sites were prepared by surgically removing a part of alveolar bone of premolars of adults dogs, placing elastic orthodontic ligatures for 8weeks, thereby inducing periodontal disease. The diseased roots were extracted and transplanted into healthy extraction sockets, and these were designated as control group 1. Diseased roots transplanted into diseased sockets were designated as control group 2. Diseased roots which had been root planed, treated with citric acid and transplanted into healthy sockets were designated as experimental group 1, while identically treated roots which had been transplanted into diseased sockets were designated as experimental group 2. Observations were made at weeks 2, 8 and 12, with following results. 1. At week 2, experimental group 2 showed some inflammatory cell infiltration in the connective tissue above the extraction sockets, while control groups showed less inflammatory or foreign body reactions throughout the experiment. 2. In both control groups, root surface resorption was observed throughout the experiment, while experimental groups showed a little resorption. 3. Control group 1 & 2 showed ankylosis by newly-formed bone ground the resorbed root surfaces, while experimental group 1 & 2 displayed collagen fibers which are not functionally-arranged, with random, loose arrangement or parallel orientation to root surfaces, and newly-formed bone outside of them. 4. In both control groups & experimental groups which had been transplanted into a clinically healthy extraction sockets & periodontally affected extraction sockets groups, histological differences were not significant. 5. Root resorption or ankylosis in control group 1 & 2 had increased quantitatively as experiment progressed. 6. New bone formation developed from the base and lateral wall of extraction sockets. In both control groups & experimental groups, root surfaces lying next to the upper portion of extraction sockets showed little alveolar bone formation and surrounded by connective tissue fiber at weeks 2 & 8, while at weeks 12, they did show alveolar bone formation. 7. At week 12, experimental group 2 showed numerous cells which appeared to be periodontal ligament cells, with functionally arranged connective tissue fibers between the roots and alveolar bone.

• Journal of Conservation Science
• /
• v.27 no.3
• /
• pp.323-332
• /
• 2011

Microtexture and components of 7 glass bead fragments excavated from Andong tumulus in Gildu-ri, Goheung have been analyzed to determine the characteristics of their weathered condition as well as chemical compositions. Firstly, status of microtexture shows that there is a large quantity of pollutants which were presumably transferred from the buried environment into the surface and the gap of the cracks. The examination has displayed that there are less amount of alkali metal components such as sodium (Na) and potasium (K) in the gap of the cracks than on the surface. The chemical compositions analysis has confirmed that two samples belongs to potash glass group ($K_2O-SiO_2$), four to soda glass group ($Na_2O-SiO_2$), and one to the mixed alkali glass group. Chromophoric elements of the glass varies by different colours: blue and navy are cobalt (Co); greenish blue is copper (Cu) and iron (Fe); and light brown is Fe respectively. Such kind of scientific analysis of the excavated glass beads will contribute to the understanding of interchange between various local cultures and arts within the southwest region of Korean Peninsula during the 4th and the 5th centuries.

• Journal of Microbiology and Biotechnology
• /
• v.22 no.4
• /
• pp.501-509
• /
• 2012

A 990 bp full-length gene (xynAHJ2) encoding a 329-residue polypeptide (XynAHJ2) with a calculated mass of 38.4 kDa was cloned from Bacillus sp. HJ2 harbored in a saline soil. XynAHJ2 showed no signal peptide, distinct amino acid stretches of glycoside hydrolase (GH) family 10 intracellular endoxylanases, and the highest amino acid sequence identity of 65.3% with the identified GH 10 intracellular mesophilic endoxylanase iM-KRICT PX1-Ps from Paenibacillus sp. HPL-001 (ACJ06666). The recombinant enzyme (rXynAHJ2) was expressed in Escherichia coli and displayed the typical characteristics of low-temperature-active enzyme (exhibiting optimum activity at $35^{\circ}C$, 62% at $20^{\circ}C$, and 38% at $10^{\circ}C$; thermolability at ${\geq}45^{\circ}C$). Compared with the reported GH 10 low-temperature-active endoxylanases, which are all extracellular, rXynAHJ2 showed low amino acid sequence identities (<45%), low homology (different phylogenetic cluster), and difference of structure (decreased amount of total accessible surface area and exposed nonpolar accessible surface area). Compared with the reported GH 10 intracellular endoxylanases, which are all mesophilic and thermophilic, rXynAHJ2 has decreased numbers of arginine residues and salt bridges, and showed resistance to $Ni^{2+}$, $Ca^{2+}$, or EDTA at 10 mM final concentration. The above mechanism of structural adaptation for low-temperature activity of intracellular endoxylanase rXynAHJ2 is different from that of GH 10 extracellular low-temperature-active endoxylanases. This is the first report of the molecular and biochemical characterizations of a novel intracellular low-temperature-active xylanase.