• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.07a
• /
• pp.330-333
• /
• 2002

The substrate temperature is an important parameter in thin film deposition process. In this paper the effects of the substrate temperature on the properties of CuIn0.75Ga0.25Se2(CIGS) thin films are reported. Structure, surface morphology and optical properties of CIGS thin films deposited at various substrate temperatures have been investigated using a number of analysis techniques. X-ray diffraction (XRD) analysis shows that CIGS films exhibit a strong <112> preferred orientation. As expected, at higher substrate temperatures the films displayed a higher degree of crystallinity. The <112> peak was also enhanced and other CIGS peaks appeared simultaneously These results were supported by experimental work using Raman spectroscopy. The Raman spectra of the as-grown CIGS thin films show only the Al mode peak. The intensity of this peak was enhanced at higher deposition temperatures. Scanning electron microscopy (SEM) results revealed very small grains in films fabricated at 48$0^{\circ}C$ substrate temperature. When the substrate temperature was increased the average grain size also increased together with a reduction in the number and size of the voids. The deposition temperature also had a significant influence on the transmission spectra.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.07a
• /
• pp.383-386
• /
• 2002

Polycrystalline Cu(In,Ga)Se$_2$(CIGS) thin-films were grown by co-evaporation on a soda lime glass substrate. In this paper the effects of the Se evaporation temperature on the properties of CuIn0.75Ga0.25Se2 (CIGS) thin films. Structure, surface morphology and optical properties of CIGS thin films deposited at various Se evaporation temperatures have been investigated using a number of analysis techniques. X-ray diffraction (XRD) analysis shows that CIGS films exhibit a strong <112> preferred orientation. As expected, at higher Se evaporation temperatures the films displayed a lower degree of crystallinity. The <112> peak was also enhanced and other CIGS peaks appeared simultaneously. These results were supported by experimental work using scanning electron microscopy When the Se evaporation temperature was increased, the average grain size also decreased together with a reduction Cu content. The Se evaporation temperature also had a significant inf1uence on the transmission spectra. Increasing the Se evaporation temperature, the cell efficiency was improved dramatically to 11.75% with Voc = 556 mV, Jsc = 32.17 mA/cm2 and FF = 0.66. The Se evaporation temperature is an important parameter in thin film deposition regardless of the deposition technique being used to deposit thin films

• Parasites, Hosts and Diseases
• /
• v.55 no.3
• /
• pp.255-267
• /
• 2017

Malaria is an infectious disease affecting humans, which is transmitted by the bite of Anopheles mosquitoes harboring sporozoites of parasitic protozoans belonging to the genus Plasmodium. Despite past achievements to control the protozoan disease, malaria still remains a significant health threat up to now. In this study, we cloned and characterized the full-unit Plasmodium yoelii genes encoding merozoite surface protein 1 (MSP1), circumsporozoite protein (CSP), and Duffy-binding protein (DBP), each of which can be applied for investigations to obtain potent protective vaccines in the rodent malaria model, due to their specific expression patterns during the parasite life cycle. Recombinant fragments corresponding to the middle and C-terminal regions of PyMSP1 and PyCSP, respectively, displayed strong reactivity against P. yoelii-infected mice sera. Specific native antigens invoking strong humoral immune response during the primary and secondary infections of P. yoelii were also abundantly detected in experimental ICR mice. The low or negligible parasitemia observed in the secondary infected mice was likely to result from the neutralizing action of the protective antibodies. Identification of these antigenic proteins might provide the necessary information and means to characterize additional vaccine candidate antigens, selected solely on their ability to produce the protective antibodies.

• Proceedings of the Korean Society of Medical Physics Conference
• /
• 2002.09a
• /
• pp.429-431
• /
• 2002

Metabolic analysis of biological tissues, the interventional radiology in MRT (Magnetic Resonance Treatment) and for clinical diagnoses, representation of 4-Dimensional (4D) structural information (x,y,z,t) of biological tissues is required. This paper discusses image representation techniques for those 4D MR Images. We have proposed an image reconstruction method for ultra-fast 3D MRI. It is based on image interpolation and prediction of un-acquired pictorial data in both of the real and the k-space (the acquisition domain in MRI). A 4D MR image is reconstructed from only two 3D MR images and acquired a few echo signals that are optimized by prediction of the tissue motion. This prediction can be done by the phase of acquired echo signal is proportioned to the tissue motion. On the other hand, reconstructed 4D MR images are represented as a 3D-movie by using computer graphics techniques. Rendered tissue surfaces and/or ROIs are displayed on a CRT monitor. It is represented in an arbitrary plane and/or rendered surface with their motion. As examples of the proposed representation techniques, the finger and the lung motion of healthy volunteers are demonstrated.

• The Plant Pathology Journal
• /
• v.28 no.1
• /
• pp.10-19
• /
• 2012

This study investigated the distribution of endophytic fungi obtained from the surface sterilized tissues of leaves, stems and roots of chili pepper ($Capsicum$ $annuum$ L.) plants in seedling, flowering and fruiting stages in Korea and their antifungal activity. A total of 481 isolates were recovered and were identified using molecular techniques. Based on rDNA ITS gene sequence and phylogenetic analysis, 21 fungal genera were characterized, belonging to 16 Ascomycota and 5 Basidiomycota. $Penicillium$ in seedling stage, $Fusarium$ in flowering stage, $Colletotrichum$ followed by $Fusarium$, $Alternaria$ and $Xylaria$ in fruiting stage was predominant and $Alternaria$, $Cladosporium$ and $Fusarium$ were common in all growth stages. Among 481 endophytes 90 phenotypes were evaluated for the antimicrobial activity against three major pathogens ($Phytophthora$ $capsici$, $Colletotrichum$ $acutatum$ and $Fusarium$ $oxysporum$) of chili pepper. Among them 16 isolates inhibited the growth of at least one test microorganisms. Three strains showed a broad spectrum antifungal activity and displayed strong inhibition against chili pepper pathogenic fungi.

• Journal of the Korean Society of Safety
• /
• v.33 no.1
• /
• pp.95-102
• /
• 2018

This study investigated the improvement of safety certification marking method and location marked on temporary equipments in order to guarantee the quality and safety of temporary equipments. The survey was performed for the stakeholder (manufacturers, lessors, and users) to find out the effective way that all stakeholder can agree each other. The main reason which users checked the safety certification making is that the mandatory safety certification marking can prevent the usage of poor and illegal temporary equipments. For the marking method, all stakeholder agreed that a depressed engraving method was an effective and usable displaying method. The opinions about the position of safety certification marking among the users, lessors, and manufacturers did not come into the agreement. The manufacturers preferred the marking position in which the engraving process is easy, but users wanted the conspicuous place such as vertical member. However, it is necessary to continuously study ways to adopt the position preferred by the users.

• International Journal of Fluid Machinery and Systems
• /
• v.10 no.1
• /
• pp.47-53
• /
• 2017

Surface pressure integration and momentum method were respectively performed to evaluate the impeller thrust and the system thrust of a contra-rotating axial flow water jet propulsion, and an interesting phenomenon so-called thrust paradox was revealed. To explain the paradox, the impeller thrust and the system thrust were physically and theoretically analyzed, the results show that the impeller thrust is head involved and is determined by the hydraulic parameters upstream and downstream the impeller, while the momentum method depicted by a classic equation is valid simply under the best efficiency point. Consequently, the role of a water jet propulsion nozzle was deduced that the nozzle is mainly to limit the flow rate that crosses the impeller and to assure the system working under the best efficiency condition apart from its ability to produce momentum difference. Related mathematical formula expressed the nozzle diameter is the dominant variable used to calculate the working condition of the water jet propulsion. Therefore the nozzle diameter can be steadily estimated by the former expression. The system thrust scaling characteristics under various speeds were displayed lastly.

• Journal of Biomedical Engineering Research
• /
• v.23 no.2
• /
• pp.101-107
• /
• 2002

This paper presents a segmentation algorithm to extract endocardial contour and epicardial contour of left ventricle in MR Cardiac images. The algorithm is based on a generalized gradient vector flow(GGVF) snake and a prediction of initial contour(PIC). Especially. the proposed algorithm uses physical characteristics of endocardial and epicardial contours, cross profile correlation matching(CPCM), and a mixed interpolation model. In the experiment, the proposed method is applied to short axis MR cardiac image set, which are obtained by Siemens, Medinus, and GE MRI Systems. The experimental results show that the proposed algorithm can extract acceptable epicardial and endocardial walls. We calculate quantitative parameters from the segmented results, which are displayed graphically. The segmented left vents role is visualized volumetrically by surface rendering. The proposed algorithm is implemented on Windows environment using Visual C ++.

• Journal of Power System Engineering
• /
• v.9 no.4
• /
• pp.137-142
• /
• 2005

The effects of temperature and initial crack length on impact fracture behavior of side plate material of 35 ton class FRP ship, which are composed by glass fiber and unsaturated polyester resin, were investigated. Impact fracture toughness of GF/PE composites displayed maximum value when the temperature of specimen is room temperature and $50^{\circ}C$, and with decrease in temperature of specimen, impact fracture toughness decreased. Impact fracture energy of GF/EP composites decreased with increase in initial crack length of specimen, and this value decreased rapidly when the temperature of specimen is lowest, $-25^{\circ}C$,. It is believed that sensitivity of notch on impact fracture energy were increased with decrease in temperature of specimen. As the GF/EP composites exposed in low temperature, impact fracture toughness of composites decreased gradually owing to the decrease of interface bonding strength caused by difference of thermal expansion coefficient between the glass fiber/polyester resin. Further, decrease of interface bonding strength of composites with decrease in specimen temperature was ascertained by SEM photograph of impact fracture surface.

• Korean Journal of Veterinary Research
• /
• v.50 no.1
• /
• pp.25-28
• /
• 2010

Caseous lymphadenitis (CLA) is a chronic and contagious disease of sheep and goats caused by Corynebacterium (C.) pseudotuberculosis. A four-year-old female Saanen dairy goat was submitted to the Animal Disease Diagnostic Center at National Veterinary Research and Quarantine Service. The clinical signs of the goat were emaciation, abortion and quadriplegia. The multifocal nodules of lymph nodes were encapsulated and filled with whitish caseous contents on the cut surface. Histopathologically, lymph nodes displayed suppurative and necrotizing granulomas. Caseous necrosis was diffusely observed in the center of the lymph nodes. Gram positive bacilli were shown in the lesions. C. pseudotuberculosis was isolated and confirmed by the biochemical tests and PCR assay. Based on clinical signs, histopathological examination and bacterial isolation, we diagnosed this case as CLA. To our knowledge, this is the first report of CLA in a Saanen dairy goat in Korea.