• Journal of the Korean Society of Costume
• /
• v.59 no.3
• /
• pp.145-156
• /
• 2009

This study proposes the product development through an organic link with multi-faceted analysis on the archetype of traditional costumes culture. In order to find ways to develop cultural products, Jogakbo was selected, and the research result is as following. 1. Analysis on the types of Jogakbo products sold in the market shows that there are not only living, stationary, and fashion items, but also DIY packages. In terms of materials used, most of these Jogakbo products were made of fabric or mixture of different materials. These products displayed similar tendency by reflecting formative characteristics of Jogakbo. 2. This study analyzed the color, surface composition, material, manufacturing, and usage of Jogakbo. The rotor of Jogakbo is mostly composed of mono tone colors or Obangsac(five-element colors). The mono tone colors carries environmentally friendly meaning as it is using the natural color and Obangsac means harmony. Moreover, the surface composition of Jogakbo represents the expansion through connection and its material is also meaningful in that it is recycling. Manufacturing of Jogakbo has educational significance, fortune-wishing characteristics, decorative function, it also gives a gratification of handcraft. The usage of Jogakbo is a multi-(unctional article whose form is determined by an item that is held inside it. 3. Through the analysis on Jogakbo, this study presents the baby wear in relation to the ere-friendliness of colors, brooch sets using the surface composition, dresses using recycling fabric, children's educational instruments with educational significance, as well as multi-functional packages in regards to usage of Jogakbo.

• Journal of Conservation Science
• /
• v.26 no.1
• /
• pp.13-24
• /
• 2010

This study examined each handiwork method of 4 filigree artifacts from Neungsan-ri temple site in Buyeo, Korea through material characteristic and microstructure analysis. As a result, it was indicated that all of the artifacts have comparatively higher purity than 22.7K and some of filigree artifacts showed that gold is alloyed with silver at a certain ratio. Gold thread that decorates surface showed thickness of 0.2~0.8mm and displayed various forms of section. Gold granule indicated that 2 or 3 granules are adhered together and they are 0.3~0.8mm in diameter. Trace of soldering was observed from gold thread and gold granule joints on surface and it confirmed a possibility of being soldering using gold solder through componential analysis. Also, it reveals a surface decorated with pigments such as cinnabar(HgS) and black.

• Journal of Biomedical Engineering Research
• /
• v.14 no.4
• /
• pp.307-314
• /
• 1993

Plasma protein adsorption is the first event in the blood-material interaction and influenc- es subsequent platelet adhesion towards thlㅈombus formation. Thiㅈomboembolic events are strongly influenced by surface characteristics of materials and fluid dynamics inside the blood pump. In vitro flow visualizaion and an amimal experiment with the moving actuator type TAH were Performed in order to investigate fluid dynamic effects on the protein adsorption. The diffel'encl level, j of shear rate inside the ventricle Lvere determined by consid- ering the direction of the major opening of four healt valves in the implanted TAH and the visualized flow patterns as well. Each ventricle of the explanted TAH was sectionalized into 12 segments according to the shear rate level. The adsorbed protein on each segment was quantified using the ELISA method after soaking in 2% (wye)SDS/PBS for two days. Adsorbed protein layer thicknesses Itvere measured by the Immunogotd method under TEM. The SEM observation show that right ventricle (RV) , immobilized with albumin, displayed different degrees of platelet adhesion on each segment, whereas the left ventricle (LV), grafted by PEO-sulronate, indicated nearly , iame platelet adhesion behavior, regardless of shear rates. The surface concentrations of adsorbed proteins in the low shear rate region are hlghel'than those in the high region, which was confirmed statistically. A modified adsorption model of plasma protein onto polyurethane surface was suggested by considering the effect of the fluid dynamic characteristics.

• Applied Chemistry for Engineering
• /
• v.16 no.1
• /
• pp.112-116
• /
• 2005

We investigated the surface modification method for the preparation of organic-inorganic hybrid composite thin film. Gelatin obtained from the decomposition of collagen was allowed to adsorb in a polystyrene tissue culture dish for 2 h to from layers of gelatin. Supersaturated ionic solution of calcium and phosphorus was injected on the gelatin adsorbed layer to form calcium phosphate thin film. During the initial period of incubation, nucleates were formed. With increase of the incubation time, CaP (calcium phosphate) thin film grew on the surface of the culture dish. The gelatin/CaP thin film displayed the highly porous three-dimensional surface structure. Attenuated, total reflectance Fourier transform, infra-red spectroscopy (ATR-FTIR) was used to analyze the chemical properties of CaP film. The analysis demonstrated that the CaP film formed at initial period of treatment appeared to be amorphous. With increase of incubation time, the crystallinity of the film was slightly increased, but the presence of the peaks for the low crystalline CaP confirmed that the CaP thin film prepared in this study was poorly crystallized.

• Journal of Microbiology and Biotechnology
• /
• v.24 no.12
• /
• pp.1719-1727
• /
• 2014

In the present study, whispovirus immediate early 1 promoter (ie-1) was used to initiate surface expression of the hemagglutinin (HA) protein of Egyptian H5N1 avian influenza virus (AIV) by using the baculovirus expression vector system. The HA gene and whispovirus ie-1 promoter sequence were synthesized as a fused expression cassette (ie1-HA) and successfully cloned into the pFastBac-1 transfer vector. The recombinant vector was transformed into DH10Bac competent cells, and the recombinant bacmid was generated via site-specific transposition. The recombinant bacmid was used for transfection of Spodoptera frugiperda (Sf-9) insect cells to construct the recombinant baculovirus and to induce expression of the HA protein of H5N1 AIV. The recombinant glycoprotein expressed in Sf-9 cells showed hemadsorption activity. Hemagglutination activity was also detected in both extra- and intracellular recombinant HAs. Both the HA and hemadsorption activities were inhibited by reference polyclonal anti-H5 sera. Significant expression of the recombinant protein was observed on the surface of infected insect cells by using immunofluorescence. SDS-PAGE analysis of the expressed protein revealed the presence of a visually distinguishable band of ~63 kDa in size, which was absent in the non-infected cell control. Western blot analysis confirmed that the distinct 63 kDa band corresponded to the recombinant HA glycoprotein of H5N1 AIV. This study reports the successful expression of the HA protein of H5N1 AIV. The expressed protein was displayed on the plasma membrane of infected insect cells under the control of whispovirus ie-1 promoter by using the baculovirus expression vector system.

• Journal of the Korean Society for Heat Treatment
• /
• v.15 no.2
• /
• pp.57-64
• /
• 2002

The 22%Cr-5%Ni-3%Mo duplex and 18%Cr-8%Ni austenitic stainless steels have been nitrogen permeated under the $1Kg/cm^2$ nitrogen gas atmosphere at the temperature range of $1050^{\circ}C{\sim}1150^{\circ}C$. The nitrogen-permeated duplex and austenitic stainless steels showed the gradual decrease in hardness with increasing depth below surface. The duplex stainless steel showed nitrogen pearlite at the outmost surface and austenite single phase in the center after nitrogen permeation treatment, while the obvious microstructural change was not observed for the nitrogen-permeated austenitic stainless steel. After solution annealing the nitrogen-permeated stainless steels(NPSA treatment) at $1200^{\circ}C$ for 10 hours, the hardness of the duplex and austenitic stainless steels was constant through the 2 mm thickness of the specimen, and the ${\alpha}+{\gamma}$ phase of duplex stainless steel changed to austenite single phase. Tensile strengths and elongations of the NPSA-treated duplex stainless steel remarkably increased compared to those of solution annealed (SA) duplex stainless steel due to the solution strengthening effect of nitrogen and the phase change from a mixture of ferrite and austenite to austenite single phase, while the NP-treated austenitic stainless steel displayed the lowest value in elongation due to inhomogeneous deformation by the hardness difference between surface and interior.

• 한국해양학회지
• /
• v.13 no.2
• /
• pp.17-25
• /
• 1978

General water quality parameters were measured, as a base-line study, for possible water pollution problems in the coastal waters of some important harbors and near-sea industrial complexes all around coastal zones of Korea from June 1 to October 15, 1977. The areas surveyed were near Mugho-Samcheog, Ulsan, Jinhae-Masan, Yeosu-Gwangyang, Mogpo, Gunsan and Incheon. Among the surveyed coastal areas, the Ulsan and the Jinhae-Masan areas showed high levels of dissolved oxygen, pH, COD and nutrients. Particularly, the surface waters of the Ulsan inner bay represented COD 15.6mg/l and NO$\sub$2/-N 110$\mu\textrm{g}$/l. The surface layer of the Masan bay displayed pH 8.92 and NO$\sub$3/-N 372$\mu\textrm{g}$/l, while 309$\mu\textrm{g}$/l of PO$\sub$4/-P was recorded in the surface of the Haengam bay. In general it is shown that some coastal areas are presenting signs of pollution from man's activities.

• Geomechanics and Engineering
• /
• v.23 no.1
• /
• pp.85-92
• /
• 2020

This study adopted soil test and laboratory physical model experiments to simulate the tailings impoundment accumulation process according to the principle of similarity. Relying on the practical engineering, it analyzed the tailings deposition characteristics on dry beach surface during the damming process, as well as the variation rules of dam saturation line. Results suggested that, the tailings particles gradually became finer along the dry beach surface to inside the impoundment. The particle size suddenly changed at the junction between the deposited beach and the water surface, which displayed an obvious coarsening phenomenon. Besides, the deposited beach exhibited the vertical feature of coarse upward and fine downward on the whole. Additionally, in the physical model, the saturation line elevated with the increase in dam height, and its amplitude was relatively obvious within the range of 1.0-4.5 m away from the initial dam. Under flood condition, the saturation line height was higher than that under normal condition on the whole, with the maximum height difference of 4 cm. This study could provide an important theoretical basis for further studies on dam failure experiments and the evolution rules of leaked tailings flow.

• Journal of Environmental Impact Assessment
• /
• v.20 no.4
• /
• pp.523-538
• /
• 2011

This study analyzes the changes in the surface area of each forest cover, based on temperature data analysis and satellite imagery as the basic methods for the impact assessment of climate change on regional units. Furthermore, future changes in the forest cover are predicted using the double exponential smoothing method. The results of the study have shown an overall increase in annual mean temperature in the studied region since 1990, and an especially increased rate in winter and autumn compared to other seasons. The multi-temporal analysis of the changes in the forest cover using satellite images showed a large decrease of coniferous forests, and a continual increase in deciduous forests and mixed forests. Such changes are attributed to the increase in annual mean temperature of the studied regions. The analysis of changes in the surface area of each forest cover using the statistical data displayed similar tendencies as that of the forest cover categorizing results from the satellite images. Accordingly, rapid changes in forest cover following the increase of temperature in the studied regions could be expected. The results of the study of the forest cover surface using the double exponential smoothing method predict a continual decrease in coniferous forests until 2050. On the contrary, deciduous forests and mixed forests are predicted to show continually increasing tendencies. Deciduous forests have been predicted to increase the most in the future. With these results, the data on forest cover can be usefully applied as the main index for climate change. Further qualitative results are expected to be deduced from these data in the future, compared to the analyses of the relationship between tree species of forest and climate factors.

• Applied Chemistry for Engineering
• /
• v.28 no.5
• /
• pp.554-558
• /
• 2017

In order to achieve a hydrophobic surface of silica, we reacted silica nanoparticles with hexamethyldisilazane (HMDS) under various reaction conditions. Modification of the surface of silica with organic materials was confirmed by the thermogravity and elemental analysis. The modified silica displayed nearly the same morphology as to the pristine silica. The reaction of 20 g of HMDS with 1 g of silica in decalin at $200^{\circ}C$ for 6 hours was found to be the optimum reaction condition in terms of the dispersity in toluene and the surface roughness of composite films. Oxygen permeation studies of the composite film demonstrated that the modified silica enhanced a gas barrier performance.