• 폴리머
• /
• 제36권1호
• /
• pp.29-33
• /
• 2012

관능성 단량체로서 acrylic acid(AA)를 사용하였고, 기본 단량체로서는 2-ethylhexyl acrylate(2-EHA)를 사용하여 용액중합의 방법으로 점착제를 합성하였다. 점착제의 점착물성 중에 AA와 경화제 함량에 따른 점착제의 표면에너지와 물성변화 연구를 조사하였다. 합성된 점착제의 구조는 FTIR을 통하여 확인하였고 점도와 분자량은 Brookfield 점도계와 GPC를 사용하여 각각 측정하였다. 분자량과 점도는 AA가 6 wt%까지는 함량증가에 따라 증가하였으며 6 wt% 이상에서는 감소하였다. 이러한 경향은 표면에너지 역시 AA 함량증가에 따라 COOH 그룹에 의한 극성 강화로 표면에너지는 증가하였다. 반면, 점착력은 분자량과 반비례 관계를 보였으며 AA 함량과 경화제 함량 증가에 따라 감소하는 경향을 나타내었다.

• Korean Journal of Chemical Engineering
• /
• 제35권11호
• /
• pp.2290-2295
• /
• 2018

An acceleration stress test (AST) was performed to evaluate the durability of a polymer membrane in a polymer electrolyte membrane fuel cell (PEMFC) for 500 hours. Previous studies have shown that hydrogen crossover measured by linear sweep voltammetry (LSV) increases when the polymer membrane deteriorates in the AST process. On the other hand, hydrogen crossover of the membrane often decreases in the early stages of the AST test. To investigate the cause of this phenomenon, we analyzed the MEA operated for 50 hours using the AST method (OCV, RH 30% and $90^{\circ}C$). Cyclic voltammetry and transmission electron showed that the electrochemical surface area (ECSA) decreased due to the growth of electrode catalyst particles and that the hydrogen crossover current density measured by LSV could be reduced. Fourier transform infrared spectroscopy and thermogravimetric/differential thermal analysis showed that -S-O-S- crosslinking occurred in the polymer after the 50 hour AST. Gas chromatography showed that the hydrogen permeability was decreased by -S-O-S- crosslinking. The reduction of the hydrogen crossover current density measured by LSV in the early stages of AST could be caused by both reduction of the electrochemical surface area of the electrode catalyst and -S-O-S- crosslinking.

• 공업화학
• /
• 제4권3호
• /
• pp.544-548
• /
• 1993

Poly(phenylene sulfide sulfone)[PPSS]를 시간과 온도를 변화시키면서 열처리를 하였을 때 이들의 유리전이 온도($T_g$)를 DSC로서 조사하였다. 그 결과 PPSS의 $T_g$는 열처리온도가 $230^{\circ}C$까지는 열처리 시간이 길어질수록 증가하다가 평형에 도달하였다. 열처리 온도가 $245^{\circ}C$ 이상에서는 열처리 시간이 길어질수록 $T_g$가 증가하다가 어느 정도 시간이 되면 감소한 뒤 다시 증가하는 것으로 나타났다. 이 현상을 경화가 진행됨에 따른 chain extension반응과 oxidative crosslinking 및 thermal crosslinking으로 설명하였다.

• 한국의류학회지
• /
• 제25권1호
• /
• pp.144-153
• /
• 2001

The effect of crosslinking on hand of the cellulase treated Tencel fabrics was investigated. Tencel fabrics were crosslinked with DMDHEU, mechanically prefibrillated, hydrolyzed by cellulase, and treated with softener. The treated fabrics were characterized by add-on, weight loss, DP rating, WRA, strength, SEM analysis and hand measurement. As DMDHEU concentration increased, weight loss of DMDHEU/cellulase treated fabrics decreased. However, cellulase treatment decreased DP properties and strength retention. Less fibrils were observed in the cellulase treated fabrics after DMDHEU treatment than the cellulase treated ones. It was confirmed that crosslinking with DMDHEU treatment was effective to control fibrillation. At 5% of DMDHEU concentration, DMDHEU/cellulase treated fabrics showed softer, smoother and bulkier hand compared with other treated fabrics. Among mechanical properties, bending and shearing properties were decreased progressively through DMDHEU, cellulase, and softener treatment. DMDHEU treatment contributed to impart resilience, cellulase treatment to bulkiness and softener treatment to smoothness. As the treatment of DMDHEU, cellulase, and softener progressed NUMREI, FUKURAMI, and THV increased with the exception of KOSHI.

• 한국응용과학기술학회지
• /
• 제27권2호
• /
• pp.168-174
• /
• 2010

In this research, an effective method for reducing the fibrillation of lyocell fibers, which are spun from a solution of cellulose in N-methyl morpholine-N-oxide(NMMO), through consecutive chemical treatments. Undried solution-spun cellulosic fiber was firstly treated with 10 to 30 wt% of multifunctional crosslinking agents, such as ethylene glycol poly(3-chloro-2-hydroxypropyl) ether, and then dipped into alkaline solution to introduce epoxy functions. Finally steam condition was applied to occur a chemical crosslinking in order to reduce the fibrillation on the surface of fibers. Fibrillation was also reduced significantly by adding extra $Na_2SO_4$ in NaOH solution. In addition, Antifibrilllated lyocell fibers show the slightly higher dyeability(4 %) to Cibacron Blue without serious reduction of mechanical properties.

• Journal of Pharmaceutical Investigation
• /
• 제26권4호
• /
• pp.273-280
• /
• 1996

Chondroitin sulfate/gelatin microspheres containing dexamethasone 21-acetate were prepared by complex coacervation method and their release patterns were examined in vitro. Microspheres prepared with a small amount of crosslinking agent had smooth surface and few pores, but those with a large amount of crosslinking agent were more porous and less spherical. In vitro release patterns were varied by changing polymer/drug weight ratio and amount of crosslinking agent. The release rate of dexamethasone 21-acetate in the presence of collagenase was faster than that in the absence of collagenase. Anti-inflammatory effect of dexamethasone 21-acetate microspheres was more efficient than that of dexamethasone 21-acetate solution in carrageenan-induced arthritis in the rat. On the basis of the above results, we might expect the degradation and drug release rate of these microspheres to be regulated by the degree of crosslinking and the level of enzymes. In patients with severe rheumatoid arthritis who have high concentration of collagenase, more drug would be released from the microspheres. An intra-articular injection therapy of rheumatoid arthritis with desired release kinetics could be developed to enhance patient compliance and therapeutic index.

• 폴리머
• /
• 제26권5호
• /
• pp.653-660
• /
• 2002

가교제 poly(ethylene glycol) diacrylate (PEGDA)를 사용하여 제조한 poly(N-iso-propylacrylamide) (PNIPAAm) 및 poly (N-isopropylacrylamide-co-sodium methacrylate) (P(NIPAAm-co-SMA)) hydrogels의 부피 상전이 현상을 함수율과 표면적의 변화로 고찰하였다. Hydyogel의 부피 상전이 온도는 가교제의 농도에는 영향을 받지 않았으나 공단량체인 SMA의 소량 첨가로 4$0^{\circ}C$ 이상 상승하였다. 특히 PEGDA를 가교제로 사용하였을 경우 가교 길이가 길어짐에 따라 부피 상전이 온도가 더 높게 상승하였다. PNIPAAm 및 P(NIPAAm-co-SMA) hydrogels의 표면적 역시 부피 상전이 온도를 전후하여 감소하였는데 이는 부피 상전이 과정에서 기공의 크기가 현저하게 감소하였기 때문이다. 따라서 표면적과 기공 크기의 변화가 부피 상전이를 나타내는 주요한 인자임을 알 수 있다.

• Elastomers and Composites
• /
• 제54권3호
• /
• pp.201-208
• /
• 2019

Superabsorbent hydrogel (SAH) is a lightly crosslinked hydrophilic functional polymer material comprising a flexible chain structure, which can absorb and retain high amounts of water or aqueous fluids even under high pressure. Therefore, it is important to improve their characteristics such as absorption performance, residual monomer content, and water permeability. SAH nanocomposites were prepared using clay mineral as an inorganic filler and the influence of post-treatment processes such as quenching and aging process on their properties was studied. In addition, surface-crosslinking process was applied to improve the absorption performance associated with mechanical properties and water permeability. The structure of the SAH was characterized using attenuated total reflectance Fourier transform infrared spectroscopy, X-ray diffraction analysis, and scanning electron microscopy.

• Elastomers and Composites
• /
• 제53권3호
• /
• pp.124-130
• /
• 2018

Recently, microwaves have been used for desulfurization because they can selectively dissociate C-S and S-S bonds present in vulcanized rubber. In this study, we investigated the changes in structural and physical properties of EPDM (Ethylene propylene diene monomer) rubber by irradiating it with microwaves for different durations. The surface chemical composition of the irradiated EPDM rubber was analyzed by FT-IR, XPS, and EDS analyses. It was confirmed by XPS that C-S and S-S S2p peak heights greatly decreased when microwave irradiation was performed for more than 5 min. In the EPDM sample irradiated with microwaves for 10 min, the number of S-O bonds significantly increased owing to oxidation. As the microwave irradiation time was increased, SEM images showed cracks and voids on the EPDM surface. The 20% decomposition temperature of the EPDM rubber sample was investigated by TGA, and it was found to be about $435.23^{\circ}C$ for the EPDM rubber irradiated for 10 min. The crosslinking density of the EPDM rubber was determined by measuring the degree of swelling, and the highest value was observed for the E5 sample irradiated for 5 min. The degree of swelling of the E10 sample irradiated for 10 min was lower than that of the E5 sample. These results indicate that when irradiated with microwaves for more than a certain time, desulfurization occurs and the side chain of the EPDM rubber dissociates and forms additional crosslinking bonds.

• 폴리머
• /
• 제33권4호
• /
• pp.319-325
• /
• 2009

편광필름용 점착제를 합성하기 위해 아크릴 단량체를 사용하여 용액중합이 수행되었다. 사용된 아크릴 단량체는 2-ethylhexylacrylate, butylacrylate, acrylic acid였으며, 비율은 점착제의 유리전이온도 $-40^{\circ}C$에 맞추어 2-ethylhexylacrylate: butylacrylate: acrylic acid=25:50:3.5로 하였다. 중합된 점착제에 커플링제를 1 wt% 첨가하였을 때 점착제의 광투과율이 매우 증가하였다. 이러한 현상은 커플링제의 Si-O 결합이 액정셀에 대한 점착력을 향상시킨 결과임을 알 수 있었다. 가교제를 단량체 대비 0.5, 1.0, 1.5 wt% 첨가하였을 매 가교제의 함량이 증가할수록 초기점착력은 감소하고 응집력은 증가하였다. 접촉각 분석에서 가교제의 함량이 증가할수록 표면에너지가 커져 접촉각이 감소하였다. 내열성 측정에서 가교제의 증가나 온도변화에 관계없이 아크릴 점착제는 우수한 내열성을 보였으며 절단면의 관찰에서 가교제의 함량이 증가할수록 절단면이 매끄럽고 깨끗하였다. 종합적으로 점착제의 초기점착력, 응집력, 표면에너지, 절단면의 상태 등을 고려하여 적정 가교제의 투입량을 1.0 wt%로 확정하였다.