목적: 본 연구는 안경원에서의 안경용 초음파세척기를 이용한 소프트렌즈 세척 실태를 조사하고 세척용기를 달리하였을 때의 단백질 제거 효과를 비교하기 위하여 수행되었다. 방법: 서울시 소재 75개 안경원을 대상으로 소프트렌즈 세척 실태에 관한 설문조사를 실시하였다. 또한 인공누액을 사용하여 소프트렌즈에 인위적으로 단백질을 침착시킨 후 세척용기를 달리하여 안경용 초음파세척기로 세척한 후 단백질 잔존량을 측정함으로써 세척효율을 비교하였다. 또한 반복적인 초음파 세척으로 인한 소프트렌즈의 표면과 습윤성 변화를 분석하였다. 결과: 안경원에서 콘택트렌즈 세척에 안경용 초음파세척기를 이용하는 주목적은 신속함 때문임을 확인하였다. 세척용기로 플라스틱 렌즈 용기와 유리병 렌즈용기를 사용하고 안경용 초음파세척기로 소프트렌즈를 세척한 경우 유리병 렌즈용기를 사용하였을 때 세척효율이 높은 경향을 보였으나 유의성 있는 차이는 아니었다. 한편 반복적인 초음파 처리로 인하여 소프트렌즈의 표면과 습윤성의 변화가 나타남을 관찰할 수 있었다. 결론: 안경용 초음파세척기 이용 시 세척용기로 플라스틱 렌즈용기와 유리병 렌즈용기의 사용이 모두 효과적이었지만 반복적인 초음파 세척 시에는 세척용기를 사용하였다 하더라도 초음파로 인한 소프트렌즈의 변성이 우려되므로 주의를 기울여 사용하여야 것이다.
혈액 오염 처리 과정은 교정용 브라켓 부착 성공에 중요한 요소이다. 본 연구의 목적은 교정용 브라켓 접착 중 발생할 수 있는 오염 처리 과정에 따른 영향을 알아보고자 함이다. 이에 프라이머 광중합 전과 후에 혈액 오염이 되었을 때 세척 방법에 따라 전단 결합 강도에 미치는 영향을 평가해보고, 접착 파절 형태 및 표면 양상을 주사전자 현미경을 이용하여 관찰해보고자 하였다. 50개의 소구치를 대상으로, I군은 대조군으로 전통적인 산부식 방법으로 부착하였다. II군과 III군은 프라이머 광중합 전에, IV군과 V군은 프라이머 광중합 후에 혈액 오염이 일어난 군으로 나누었다. 또한 II군과 IV군은 코튼 펠렛만 이용하여, III군과 V군은 수세 후 코튼 펠렛을 이용하여 세척하였다. 그 결과 평균 전단 결합 강도는 I군, V군, III군, II군 그리고 IV군 순으로 나타났다. 또한 주사 전자 현미경 사진 상에서 수세 후 코튼 펠렛으로 닦은 군이 코튼 펠렛으로만 처리한 군에 비해 균일한 산부식 표면을 보였다. 접착제 잔류지수는 대조군과 실험군 간에 유의차가 있었다(p < 0.05).
To perform quick measurements of black carbon (BC) particles deposited on foliar surfaces of forest tree species, we investigated an optical method for measuring the amount of BC extracted from foliar surfaces and collected on quartz fiber filters. The seedlings of Fagus crenata, Castanopsis sieboldii, Larix kaempferi and Cryptomeria japonica were exposed to submicron BC particles for one growing season (1 June to 7 December 2009). At the end of the growing season, the leaves or needles of the seedlings were harvested and washed with deionized water followed by washing with chloroform to extract the BC particles deposited on the foliar surfaces. The extracted BC particles were collected on a quartz fiber filter. The absorption spectrum of the filters was measured by spectrophotometer with an integrating sphere. To obtain the relationship between the absorbance of the filter and the amount of BC particles on the filter, the amount of BC particles on the filter was determined as that of elemental carbon (EC) measured by a thermal optical method. At wavelengths below 450 nm, the absorption spectrum of the filter showed absorption by biological substances, such as epicuticular wax, resulting in the low coefficient of determination ($R^2$) in the relationship between the amount of EC on the filter ($M_{EC}$, ${\mu}g\;C\;cm^{-2}$ filter area) and the absorbance of the filter. The intercept of the regression line between $M_{EC}$ and the absorbance of the filter at 580 nm ($A_{580}$) was closest to 0. There was a significant linear relationship between the $A_{580}$ and $M_{EC}$ ($R^2$=0.917, p<0.001), suggesting that the amount of BC particles collected on the filter can be predicted from the absorbance. This optical method might serve as a simple, fast and cost-effective technique for measuring the amount of BC on foliar surfaces.
Carbon nanotube (CNT) field effect transistors and sensors use CNT as a current channel, of which the resistance varies with the gate voltage or upon molecule adsorption. Since the performance of CNT devices depends very much on the CNT/metal contact resistance, the CNT/electrode contact must be stable and the contact resistance must be small. Depending on the geometry of CNT/electrode contact, it can be categorized into the end-contact, embedded-contact (top-contact), and side-contact (bottom-contact). Because of difficulties in the sample preparation, the end-contact CNT device is seldom practiced. The embedded-contact in which CNT is embedded inside the electrode is desirable due to its rigidness and the low contact resistance. Fabrication of this structure is complicated, however, because each CNT has to be located under a high-resolution microscope and then the electrode is patterned by electron beam lithography. The side-contact is done by depositing CNT electrophoretically or by precipitating on the patterned electrode. Although this contact is fragile and the contact resistance is relatively high, the side-contact by far has been widely practiced because of its simple fabrication process. Here we introduce a simple method to embed CNT inside the electrode while taking advantage of the bottom-contact process. The idea is to utilize a eutectic material as an electrode, which melts at low temperature so that CNT is not damaged while annealing to melt the electrode to embed CNT. The lowering of CNT/Au contact resistance upon annealing at mild temperature has been reported, but the electrode in these studies did not melt and CNT laid on the surface of electrode even after annealing. In our experiment, we used a eutectic Au/Al film that melts at 250$^{\circ}C$. After depositing CNT on the electrode made of an Au/Al thin film, we annealed the sample at 250$^{\circ}C$ in air to induce eutectic melting. As a result, Au-Al alloy grains formed, under which the CNT was embedded to produce a rigid and low resistance contact. The embedded CNT contact was as strong as to tolerate the ultrasonic agitation for 90 s and the current-voltage measurement indicated that the contact resistance was lowered by a factor of 4. By performing standard fabrication process on this CNT-deposited substrate to add another pair of electrodes bridged by CNT in perpendicular direction, we could fabricate a CNT cross junction. Finally, we could conclude that the eutectic alloy electrode is valid for CNT sensors by examine the detection of Au ion which is spontaneously reduced to CNT surface. The device sustatined strong washing process and maintained its detection ability.
The metabolism of Entamoeba histolytica would be affected by various environmental factors, and alteration of the environment was known to afEect the fine structure of 5. histolytica. The present study was designed electronmicroscopically to investigate the ultrastructure and enzyme activities in the aEonic and conventional strains of 5. histolytica. The trophozoites of axenically cultivated HK-9 strain and conventional YS-27 and YS-49 strains of 5. histolytica were collected and liKed with 4% paraformaldehyde/0.1M cacodylate buffier(pH 74), After washing them by centrifugation, 1% warm agar was added in the sediment. Solidified agar with the trophozoites was cut into $lmm^3$ cubes, and incubated in the various substrates to observe enzyme activities. Then, the specimen was post-fixed with 3% glutaraldehyde/0.1M cacodylate buffer (PH 7.4) and 1% osmium tetroBide/0.1M cacodylate buffier (pH 7.4) , dehydrated in ascending ethanol series and embedded in epoxy resin. These were sectioned on an ultramicrotome and observed with a transmission electronmicroscope. The procedures for the observation of the fine structure were same as the above, except for the incubation in the substrate. The sections were stained with uranyl acetate and lead citrate. For the observation of the surface of the amoebae, scanning-electronmicroscopy was carried out. The results obtained in the present study are summarized as follows: 1. The fuzzy coat around double-layered plasma membrane of 5. histolytica was more irregularly and densely distributed in the conventional strains (YS-27, YS-49 strains) than in the axonic strain (HK-9 strain). 2. The endosomes, button bodies and chromatin material were surrounded by a double-layered nuclear membrane having scattered nuclear fores. The paranuclear body, mono- or double-layered vacuoles, vacuolar membrane whorls, rosette-like cylindrical bodies, aggregation of cylindrical bodies and helical bodies were found in the cytoplasm of the amoebae. Helical bodies and glycogen granules were generally abundant, while a few smooth endoplasmic reticula were observed in the cytoplasm. 3. Alkaline phosphatase activity was mainly demonstrated in the plasma membrane, limiting membranes of vacuoles and smooth endoplasmic reticula. ATPase activity was observed in the nucleus, limiting membranes of vacuoles and vacuolar membrane whorls. 4. Acid phosphatase activity was commonly demonstrated in the limiting membranes an contents of vacuoles, Iysosome-like organelles, plasma membrane and the button bodies in the nucleus. The activity was more weakly demonstrated in the HK-9 strain than in the other conventional strains of 5. histolytica. No peroBidase activity was observed in the amoeba strains employed in the present study. 5. With a scanning electron-microscope, no distinct structural differences were observed between the amoeba strains. All the trophozoite forms of the amoebae showed crater-like depressions and rugged features on the outer surface.
기존의 한방향 펌프는 순환과 배수를 위해 각각의 모터를 사용하지만, 양방향 펌프는 하나의 모터로 모터의 회전 방향에 따라 배수와 순환이 모두 가능하므로 원가절감이 가능하다. 하지만 양방향 펌프는 배수와 순환 시 펌프 케이싱 내부에서 역류와 흡입이 발생하여 유입된 물이 각각 배출구와 순환구로 원활하게 유출되지 못하는 단점이 있다. 본 연구에서는 주효과 분석을 통해 배출과 순환 시 유출되는 유량과 토크에 주요한 영향을 미치는 인자를 설계변수로 선택하여 실험계획법, 근사모델, 그리고 최적설계를 통해 펌프 케이싱 형상을 최적화함으로써 역류와 흡입은 개선하고 펌프의 토크 대비 배출구와 순환구의 유량을 증가시키는 효과를 거두었다.
Hydrocyclone is widely used in industry, for its simple design, high capacity, low maintenance and low operational cost. The objective of this study is to develop hydrocyclone coagulation and filtration system. The system is made of hydrocyclone ballasted coagulation with polyaluminium chloride silicate (PACS) and upflow filter to treat micro particles in urban storm runoff. Roadside sediment particles (< $200{\mu}m$) was mixed with tap water to make various turbid suspensions to simulate urban storm runoff. The filter cartridge was filled with polyethylene media system and ran 1hr per everyday and total operation time were 8.19hrs and backwashing everyday after end of operation. The operation condition of flowrate was $8.2{\sim}11.9m^3/day$ (mean $10.1m^3/day$) and surface overflow rate (SOR) based on filter surface area was $45.5{\sim}65.9m^3/m^2/day$ (mean $55.7m^3/m^2/day$). The range of PACS dosage concentration was 14.0~31.5 mg/L. As the results of operation, the range of removal efficiency of turbidity, SS were 81.0~95.8% (mean 89.5%) 81.8~99.0% (mean 91.4%), respectively. An increase of filtration basin retention time brought on increased of removal efficiency of turbidity and SS, and increase of SOR brought on decreased of removal efficiency. During the first flush in urban area, storm runoff have an high concentration of SS (200~600 mg/L) and the filtration bed becomes clogged and decreased of removal efficiency. Backwashing begins when the drainage pipe valve at the filtration tank bottom is completely open (backwashing stage 1). Backwashing stage 2 was using air bubbles and water jet washing the media for 5 mins and open the drainage valve. After backwashing stage 1, 2, 61.83~64.04%, 18.53~27.51% of SS loading was discharged from filtration tank, respectively. Discharged SS loading from effluent was 7.12~14.79% and the range of residual SS loading in fliter was 2.26~5.00%. The backwashing effects for turbidity, SS were 89.5%, 91.4%, respectively. The hydrocyclone coagulation and filtration with backwashing system, which came out to solve the problems of the costly exchange filter media, and low efficiency of removing micro particles of filter type nonpoint treatment devices, is considered as an alternative system.
The Seokgatap pagoda composed of mainly alkali granite and other minor pink-feldspar granite, fine-grained granite, granodiorite, diorite, gabbro, and tuff. Despite the small loss and damage derived from joints, its peel-off and exfoliation are serious enough to cause the heavy deterioration on the stone surface. The chemical and petrological weathering has partly replaced the original rock-forming minerals with clay minerals and iron oxyhydroxides. Based on the petrogenesis, rock materials of the pagoda is very similar to rocks of Dabotap pagoda and the Namsan granite in the Gyeongju. The central fart of the pagoda has sunken highly, which caused all the corners to split and the structural transformation to become worse. The reverse V-shaped gaps between the materials have broken stones filled in a coarse way. The iron plates inserted between the upper flat stone laid on other stones and tile pagoda body in the north and east side has been exposed in the air and corroded, discoloring of the adjacent stones. The overall diagnosis of the Seokgatap pagoda is the deteriorated functions of the stone materials, which calls for a long-term monitoring and plans to reinforce the stone surfaces. But the main body including the pagoda roof stone needs washing on a regular basis, and the many different cracks should be fixed with glue by using the fillers or hardeners designed for stone cultural properties after removing the cement mortar. In case of the replacement of the stone materials with new stones, it's necessary to examine the pagoda for the center of gravity and support intensity of the materials. The structural stability of the pagoda can be attained by taking a reinforce measure in geotechnical engineering and making a drainage. The ground humidity, which has aggravated weathering and structural instability, should be resolved by setting up a humidity reduction facility. The contamination of lichens and bryophyte around the pagoda and on the surface is serious. Thus biochemical treatments should be given too in order to prevent further biological damages and remove the vegetation growing on the discontinuous planes.
Now many sustitution and false articles is used in korea instead of shanyao. To use shanyao correctly, we will make a quilitative certificational plan of shanyao to investigate all of lieraturea, records and documents. And we could reach conclusions as folloews. 1) Source About a source of shanyao, though korea and china has a each other source, we think there is no problem in use of both. 2) Process In our country producing shanyao as medical use is a 'duanma', we can divide into peeling and non-peeling, drying at bulks and at briquets, steaming shanyao and fresh shanyao. Regardless of existence for peeling and steaming, a distributing shanyao is received a proper judgment. Like this result was expressed by insufficiency of standards about medical components or indicating components. We detected a reminding S02 more than 10 ppm. And this expresses that there ia a problum at a drying method. To suggest proper processing methods, a standard of quility will have to be made which the existence of peeling, difference of quility between 'changma' and 'duanma', drying method and exudation test with cutted thickness are adaptable. Besides, 'maoshanyao' and 'guangshanyao' of china is processed by various methods which decrease a medical effect such as too much soaking shanyao in water, steaming with a sulfur, too much peeling, So we must process shanyao like the next methods. (1) When harvesting, dig deeply not to cut off roots. (2) Not to peel, wash shanyao in a washing machine. (3) Dry to 50-60% degree at sunny place or drying machine. (4) To be easy for drying and exudation, cut off a thick piece with 5 mm (5) Dry perfectly at ding machine. 3) Quality3) Quality (1) Functional standards It is not Proper that 'guangshanyao' is used in china because it has a problem with quility on process of working, If they did not soak shanyao in water or heat with steam, it is the real situation that they cannot cutt off shanyao evenly. In conclusion, shanyao must be heavy, powdery with a perfectly non-peeling surface, section surface is yellow-white color, unequal and has no holes. (2) Physicochemical standards It is the real situation that we can not distinguish into quility of shanyao with established test because various workings which decrease medical effects is used. Therefore we suggest a testing standard of S02 which is used in bleaching. And testing standards relatived with decrease of medical effects must be established at once. It must that Dry on loss is less than 14.0%, content of ash is less than 6.0%. Content of acid-nonsoluble ash is less than 0.5%. Contens of heavy metal has to detect less than 30 ppm and there is no reminding agricultural medince.
본 연구에서는 황토를 이용한 인견직물의 천연염색에 대한 연구의 일환으로, 인견직물의 카티온화가 이루어졌으며, 여러가지 염색조건 즉 염색온도, 염색시간, 염색 pH와 욕비에 따른 염착특성을 평가하여 적정 염색조건을 설정하였으며 이에 따른 염색된 인견직물의 견뢰도 평가를 통해 다음과 같은 결과를 얻었다. 수비법으로 얻은 황토분말의 입자 크기는 $0.4{\sim}1.7{\mu}m$ 범위로 나타났으며 $1.1{\sim}1.4{\mu}m$범위내의 분포가 가장 많은 것으로 나타났다. 황토성분을 분석한 결과, 이산화규소와 산화알루미늄이 많은 양을 차지하는 것으로 나타났다. 인견 직물의 암모늄기의 도입에 의한 양이온화는 FT-IR 흡수스펙트럼에서 $1,540cm^{-1}$ 부근의 N-H bending에 의한 출현 peak로 확인할 수 있었다. 염색 pH에 따른 K/S 값은 pH 8에서 가장 높게 나타났으며, 염색시간에 따른 K/S 값은 시간이 경과함에 따라 염색시간 30분까지는 급격히 증가하다가 그 이상의 시간에서는 거의 증가하지 않았다. 황토농도에 따른 K/S 값은 20% 이하의 농도에서는 약간 증가하지만 30%에서 최고값을 보여준 후 점차 감소하는 경향으로 나타났다. 콩즙의 전처리농도에 따른 K/S 값은 처리농도 30% 까지는 증가하였으나 그 이상의 농도에서는 오히려 약간 감소하는 경향으로 나타났다. 황토염색직물의 황토염착 분포 및 염착 상태를 관찰한 결과 황토 염색 농도가 증가함에 따라 황토입자의 부착량이 많아짐을 알 수 있다. 양이온화 처리에 의해서도 황토의 부착량이 증가하는 것을 볼 수 있으며, 콩즙을 처리하면 콩즙이 직물의 표면을 감싸는 모습을 볼 수 있으며, 콩즙을 처리하지 않은 시료에 비해 콩즙을 전처리한 시료에 더 많은 양의 황토입자가 부착되어 있는 것을 확인할 수 있다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.