• 문화기술의 융합
• /
• 제10권2호
• /
• pp.547-553
• /
• 2024

태열을 방치할 경우 아토피피부염으로 악화될 뿐만 아니라 바이러스나 세균에 감염되기도 하고 호흡기질환도 발생될 수 있어서 수면 시 발열되는 신생아 두피 표면 온도 관리가 매우 중요하다. 신생아 베개는 연약한 피부 때문에 주로 면 소재로 사용하거나 유연한 골격으로 두상교정용으로 활용되었다. 본 연구에서는 수면 시 땀 배출로 체온유지가 되지못해 태열을 방치하는 것을 예방하기 위해 기존 신생아 베개와 PCM베개를 신생아를 대상으로 수면 시 두피 표면 온도를 측정하여 주 양육자를 대상으로 이에 대한 사용성을 평가 분석하였다. 그 결과 상변화과정에서 축적 또는 방출하는 열에너지를 저장하는 PCM이 체온유지에 효과가 있음을 파악하였다. 이에 본 논문이 정량적 분석을 통해 향후 신생아 태열베개 개발을 위해 기초적인 자료로 활용될 것을 기대한다.

• Composites Research
• /
• 제12권6호
• /
• pp.53-64
• /
• 1999

LCP원섬유(fibril)와 폴리아미드6 (PA6)수지로 사출성형된 복합재료 박판(molded thin composite plaques)의 미세구조와 굽힘강도에 대한 에폭시수지 함유율의 효과를 살펴보았다. 성형은 LCP원섬유의 용융점 이하에서 하였으며 이렇게 만들어진 판재는 횡방향 배향을 보이는 두께 $65-120{\mu\textrm{m}}$의 표피층(surface skin layer), 유동방향과 거의 일치하는 배향을 보이는 표피아래층(sub-skin layer), 아크형 곡선유동형태를 보이는 심층(core layer)으로 구성되어 있었다. 에폭시함유율이 달라도 각 층의 미세구조방향은 유사하였으나 에폭시함유율이 증가함에 따라 LCP영역(domain)이 원섬유상에서 층상구조로 변했고 거시적 파괴진로(fracture path)는 인장형에서 전단형으로 바뀌었다. 또한 에폭시 4.8vol%에서 가장 우수한 굽힘강도와 파단변형율을 보였다. 굽힘강도를 수치해석한 결과 에폭시성분을 복합재에 부가하면 각 층의 두께와 미세구조 같은 기하학적인 형태가 변하면서 각 층 자체의 탄성계수와 강도가 열등화 되었음을 알았다.

• The Korean Journal of Physiology
• /
• 제10권1호
• /
• pp.61-66
• /
• 1976

Rectal temperature, skin temperature and oxygen consumption were measured in five women divers during diving under two conditions a) wearing a cotton bathing suit and b) wearing a diving suit and the following results were obtained. 1. The duration of the diving period was 30 min with the cotton bathing suit whereas it was above 120 min with the diving suit. 2. The average rectal temperature fell to $34.5^{\circ}C$ after 30 min of diving with the cotton bathing suit. On the other hand, with the diving suit, immediately after submersion, the rectal temperature rose about $3^{\circ}C$ and remained at about $39^{\circ}C$ throughout the diving period of 120 min. 3. Average mean skin temperature during diving was $11^{\circ}C$ and $21^{\circ}C$ with cotton bathing suit and with the diving suit, respectively. The mean body temperature fell to $25^{\circ}C$ with the cotton bathing suit while it reached $32^{\circ}C$ with the diving suit at the end of each diving period. 4. Oxygen consumption during diving was three fold of the pre-dive level with the cotton bathing suit but it was two fold with the diving suit. 5. Total extra heat loss was 323 kcal during 120 min of diving with the diving suit. On the contrary, with the cotton bathing suit, it was 528 kcal for 30 min, These results may suggest that the prolongation of the diving period with the diving suit is primarily due to maintenance of core temperature at more or less physiological level as a result of reduction in conductive heat loss from the body surface to the water and the Preferential distribution of blood in the core area.

• Korean Journal of Acupuncture
• /
• 제25권4호
• /
• pp.133-145
• /
• 2008

Objectives : The purpose of this study was to exam the effectiveness of acupuncture using the tonification & sedation manipulation for LI4(Hegu) and KI7(Fuliu) which was known to promote sweating for lack sweating and inhibit for excessive sweating. Methods : The subject of this study was 60 people who agreed with participating. The participants were divided into 6 groups as control group without acupuncture, acupuncture group with needle inserted perpendicularly at LI4, KI7 without manipulation(AT-A), acupuncture group with needle inserted and twisted at LI4 using sedation technique and KI7 using tonificaton technique(AT-B), acupuncture group with needle inserted and twisted at LI4 using tonificaton technique and KI7 using sedation technique(AT-C), acupuncture group with needle inserted and twisted at LI4 and KI7 using tonificaton technique(AT-D) and acupuncture group with needle inserted and twisted at LI4 and KI7 using sedation technique(AT-E). We obtained baseline data at a stable condition with the temperature of $25^{\circ}C$. After having the participant stay at $40^{\circ}C$ for 10 minute and treated with acupuncture for 10 minute, we measured the parameters such as sweating rate, water content in subcutaneous, water content in skin surface, systolic blood pressure, diastolic blood pressure, pulse rate, oxygen saturation and body temperature. Results : After the tonification & sedation manipulation at LI4 and KI7, the sweating rate was significantly decreased in AT-B, AT-D and AT-E groups. The water contents in skin surface was significantly decreased in AT-B and AT-E groups. The water contents in subcutaneous was significantly decreased in AT-B, AT-C, AT-D and AT-E groups. However, there were no significant changes in systolic blood pressure, diastolic blood pressure, pulse rate, oxygen saturation and body temperature. Conclusions : Acupuncture at LI4 and KI7 is effective in controling sweating, and the effect varies according to the tonification & sedation manipulation technique.

• 대한물리치료과학회지
• /
• 제3권3호
• /
• pp.25-34
• /
• 1996

The purpose of this experimental study was conducted to examine the most effective modality between two methods of cold application(ice pack and cold spray), the most effective length of time for the application and the continuing effect after each type of cold application. Sixty students were assigned randomly to each of two cold application methods; (a) ice pack, (2) cold spray. Each methods was applied to the posterior surface of right forearm with subject in the sitting position. Skin temperature and the electrical stimulation induced pain threshold were measured before each application and every five degree ($^{\circ}C$) decline point after ice pack application. They were also measured point of minimum skin temperature after cold spray application. The results of this study are as follows; 1. Skin temperatures according to the cold spray application decreased to a range of $4.2^{\circ}C{\sim}9.2^{\circ}C$(male, p<0.001), $3.6^{\circ}C{\sim}7.6^{\circ}C$(female, p<0.001). 2. Pain threshold according to the cold spray application increased to a range of $0.6mA{\sim}1.9mA$(male, p<0.01), $1.2mA{\sim}3.86mA$(female, p>0.05).

• Journal of the Korean Wood Science and Technology
• /
• 제31권2호
• /
• pp.38-44
• /
• 2003

플로쉬문은 우리나라에서 가장 일반적으로 사용되는 문으로서 가정용으로부터 영업용 문까지 그 용도가 다양하다. 플러쉬문의 제작방법은 거의 변화가 없이 남양재 골조 위에 합판덮개를 덮어서 본체를 구성하는 형태가 계속 사용되고 있다. 그러나 목재 시장과 판재 시장의 수요와 공급 상황이 변하기 때문에 이에 맞추어서 플러쉬문의 제작에 사용되는 재료의 선택도 달라져야 할 것이다. 이 연구에서는 플러쉬문의 제작에 HDF를 덮개 및 골조재료로 사용하고자 하였으며 일반적인 제작방법에 의하여 생산된 스킨문과 그 성능을 비교하였다. 시험용 문들을 여름과 겨울의 계절에 따라서 변하는 실내의 온도 및 습도환경에 3-4개월 동안 노출시키고 문의 변형과 온도 및 상대습도를 1주일 단위로 측정하였다. 이 연구의 결과로부터 HDF가 플러쉬문의 덮개 및 골조용 재료로 사용될 수 있음을 알 수 있었으며 이 연구에서 개발된 골조의 구성방법에 의하여 생산된 플러쉬문이 일반적인 스킨문보다 매우 우수한 성능을 나타내었다. 문의 변형은 온도 및 상대습도가 증가할수록 증가하는 경향을 나타내었으며 플러쉬문이 전반적으로 스킨문보다 적은 변형을 나타냄으로써 환경변화에 대응하여 스킨문보다 안정적이고 좋은 성능을 나타냄을 알 수 있었다.

• 현장농수산연구지
• /
• 제7권1호
• /
• pp.81-89
• /
• 2005

포도 '캠벨얼리'에서 석회비료를 과면살포한 후, 과피의 T-N, P, K, Ca 및 Mg 함량은 무처리과에 비하여 석회비료 전 처리 모두 큰 차이는 없었다. 과방중, 과립중, 과방장 및 산 함량은 처리 간 차이가 없었으나, 가용성고형물은 봉지가 씌워진 상태로 액상석회비료를 처리한 과실은 다른 처리에 비하여 감소하였다. 과피의 안토시아닌 함량은 무처리과에 비하여 소석회 및 봉지가 씌워진 상태로 액상석회비료를 처리한 과실이 현저히 감소하였다. 과피의 과분은 소석회 및 패화석 분말비료 처리과는 무처리과에 비하여 현저히 적게 발생되었다. 과립의 경도는 액상석회비료 및 소석회 처리과가 현저히 증가하였다. 그러나 과립의 탄력성은 패화석 분말비료 처리과는 현저히 감소하였다. 또한 상온 저장 중 감랑은 전 처리 모두 차이를 인정할 수 없었다.

• 한국의류학회지
• /
• 제17권2호
• /
• pp.291-299
• /
• 1993

In this study, bedclimate was investigated depending on three bedquilts used on ondol in winter. The environmental room condition and the ondol surface temperature were maintained $20{\pm}1^{\circ}C$, $50{\pm}3%R$. H and $30{\pm}1^{\circ}C$, respectively. The materials of the experimental quilts were not different from each other. But the weights of cotton filler were 1.5, 3.0, and 4.5kg for the bedquilts. Two healthy young women were subjected for seven hour's sleep with two replications for this study. The results are as follows. 1) The range of temperature under the mattress was higher($38.5{\sim}43.2^{\circ}C$) than that of the temperature on the mattress($32.4{\sim}37.0^{\circ}C$) or that of the temperature inside the bedquilts($30.2{\sim}34.5^{\circ}C$). The humidity inside the bedquilts was 40~73%R.H. 2) The range of bedclimate which subjects feel comfortable were $33.6{\sim}37.1^{\circ}C$ on the mattress, $30.2{\sim}33.6^{\circ}C$, 42~67%R.H. inside the bedquilts. At this range, the mean skin temperature of the subjects was was $34.7{\sim}35.6^{\circ}C$. 3) When there was heating, the weight of mattress increased due to evaporation by heat from below, while wehght of other bedding increased. 4) The lower limbs are noted to be a good representative for the prediction of the skin temperature during sleep. 5) The thicker the bedquilt, the warmer and more humid the bedquilt, which induce frequent body movement during sleep, hence inferior comfort properties of bedquilts.

• 패션비즈니스
• /
• 제13권3호
• /
• pp.109-117
• /
• 2009

To set up the outstanding and scientific dyeing method in making the condensed liquid of pigment obtained from onion skins and the improved reliability, the following basic experiments were performed. The pigment was extracted in the distilled water at $70^{\circ}C$ and methanol at room temperature and then it was analyzed with LC/MS/MS system (Liquid Chomatography/Mass Spectroscopy/Mass Spectroscophy, LIQ Advantage Max, Thermo Finnigan, USA) for its pigmental characteristics. The unrefined silk and refined silk were dyed by making use of the derived pigment in such a way. The chromameter (CR-200, Minolta, Japan) was used to measure the change in surface color in textiles to be dyed by the extracting condition and the color difference ${\Delta}E$ was determined according to the color difference formula CIE LAB through measuring the psychometric lightness L* and chromaticity coordinates a* and b*.

• 한국염색가공학회지
• /
• 제15권6호
• /
• pp.8-17
• /
• 2003

In order to investigate the possibility of PVA particle as toner, PVA/PVAc particle was manufactured. Fine spherical PVAc particle with emulsifier SDS(sodium Dodecyl Sulfate) and initiator V-50(2,2'- azo bis(2-amidinopropane) dihydrochloride) was manufactured by emulsion polymerization. And then, the PVAc was carried with surface saponification. PVA/PVAc skin core structured particle was obtained under optimum saponification condition. PVA skin side in manufactured PVA/PVAc particles was dyed with 1:2 metal complex type C. I. Acid Yellow 235 and then the dyed PVA particles were observed with a optical microscope. Under given polymerization condition such as SDS concentration, $1.62\times{10}^{-2} \;mol/lH_2O$, V-50 concetration, $3.7\times{10}^{-3}\;mol/lH_2O$ and temperature $50^\circ{C}$ , the high molecular weight of PVAc with Pn 13,900 and PVA with Pn 3,400 was produced. The particle distribution of obtained PVAc microspheres was appeared highly at 60 and $100\mu{m}$, respectively.