• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.56 no.6
• /
• pp.870-877
• /
• 2023

The purpose of this study was to assess the efficiency of nitrification based on ammonia loading rates and hydraulic air-loading rates in a moving bed bioreactor (MBBR) under seawater conditions. The goal was to provide foundational data for the design of these bio reactors. At an ammonia loading rate of 0.2 g TAN·m^-2 surface area·day^-1, the influent TAN concentration was determined to be 1.76±0.33 mg·L^-1, which is below the safe concentration for fish survival (2 mg·L^-1). Considering operational aspects, the optimal ammonia-loading rate was derived. Subsequently, experimental results for nitrification efficiency at the optimal ammonia-loading rate revealed that the optimum hydraulic air-loading rate was 1.8 L·air·m^-2 surface area·min^-1. This condition resulted in the lowest concentrations of TAN and NO₂-N in the influent water, thus establishing the optimal hydraulic air-loading rate. A regression equation was derived for the ammonia-removal rate (Y) based on the ammonia-loading rate (x) and expressed as a 0.5-order equation (Y=ax^0.5+b). Specifically, for TAN concentrations of 0-6 mg·L-1, the regression equation Y=0.1683x^0.5-0.13628, was established.

• Steel and Composite Structures
• /
• v.51 no.2
• /
• pp.153-172
• /
• 2024

Due to the fast development of constructions in recent years, there has been a rapid consumption of fresh water and river sand. In the production of concrete, alternatives such as sea water and sea sand are available. The near surface mounted (NSM) technique is one of the most important methods of strengthening. Aluminum alloy (AA) bars are non-rusting and suitable for usage with sea water and sand concrete (SSC). The goal of this study was to enhance the shear behaviour of SSC-beams strengthened with NSM AA bars. Twenty-four RC beams were cast from fresh water river sand concrete (FRC) and SSC before being tested in four-point flexure. All beams are the same size and have the same internal reinforcement. The major factors are the concrete type (FRC or SSC), the concrete degree (C25 or C50 with compressive strength = 25 and 50 MPa, respectively), the presence of AA bars for strengthening, the direction of AA bar reinforcement (vertical or diagonal), and the AA bar ratio (0, 0.5, 1, 1.25 and 2 %). The beams' failure mechanism, load-displacement response, ultimate capacity, and ductility were investigated. Maximum load and ductility of C25-FRC-specimens with vertical and diagonal AA bar ratios (1%) were 100,174 % and 140, 205.5 % greater, respectively, than a matching control specimen. The ultimate load and ductility of all SSC-beams were 16-28 % and 11.3-87 % greater, respectively, for different AA bar methods than that of FRC-beams. The ultimate load and ductility of C25-SSC-beams vertically strengthened with AA bar ratios were 66.7-172.7 % and 89.6-267.9 % higher than the unstrengthened beam, respectively. When compared to unstrengthened beams, the ultimate load and ductility of C50-SSC-beams vertically reinforced with AA bar ratios rose by 50-120 % and 45.4-336.1 %, respectively. National code proposed formulae were utilized to determine the theoretical load of tested beams and compared to matching experimental results. The predicted theoretical loads were found to be close to the experimental values.

• Korean Journal of Environmental Biology
• /
• v.22
• /
• pp.71-77
• /
• 2004

Alkylphenols (8), chlorophenols (2), bisphenol A, eoprostanols (2) and cholesterol compounds were analyzed in the surface water and surface sediment taken from Gwangyang Bay and surrounding streams in 2001. Among the target analytes, nonylphenol and dihydrocholesteyol compounds were detected with high concentration and high frequency. t-Octylphenol, bisphenol A and coprostanols were detected only in some sediment samples from the stream. The highest concentration of nonylphenol was determined in stream sample, and concentrations of nonylphenol in the inner part of Gwangyang Bay were higher than those in the out part. Nonylphenol concentrations in the surface seawater and surface sediment samples ranged from 4.0 to 74.0 ng l$\^$-1/ and from 3.1 to 74.3 ng g$\^$-1/ dry wt., respectively. Partition coefficient (LogK$\_$oc/) of nonylphenol between sediment and water was 4.8. Nonylphenol nnd dihydrocholesteol concentrations in the stream surface sediment samples ranged from 4.6 to 808.6 and from 78.4 to 1133.6 ng g$\^$-1/ dry wt., respectively. Relatively high concentrations of nonylphenol were found in the stream samples which aye flowing through industrial complex area, while dihydrocholesterol concentration was relatively high in the stream samples which are flowing through only municipal area. Seaward decreasing tyend in nonylphenol concentration was observed from the Seomjin River estuary to the Gwanyang Bay. Such trend was best supported by the strong correlation between nonylphenol concentration and salinity in water samples.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.3 no.1
• /
• pp.25-33
• /
• 1998

Temporal and spatial variations of nutrient elements (ammonia, nitrate, nitrite, phosphate and silicate) in surface seawater off the west coast of Korea were investigated during three periods of field survey aboard R/V Eardo of KORDI (May 1995 and June 1996) and a patrol vessel of the National Maritime Police (November 1995). In general, the concentrations of nutrient elements were lowest in June and highest in November except for ammonia that showed the lowest concentration in May and the highest in November. The results tell us that the development of thermocline and tidal front restricts riverine and benthic supply of nutrient elements to surface waters in June in the offshore regions of the study area which become nutrient-depleted due to phytoplankton bloom in spring. In late fall (November) the level of nutrient concentrations of the surface waters of the study area become high due to vigorous vertical mixing within the water column, which supplies nutrient-enriched bottom water to the surface waters.

• Korean Journal of Remote Sensing
• /
• v.26 no.5
• /
• pp.497-510
• /
• 2010

In this study, comparisons of the backscattering coefficients and the coherence values which had been extracted from SAR (Synthetic Aperture Radar) images such as JERS-1, ENVISAT and ALOS satellites with surface roughness, surface geometric and soil moisture content were carried out. As the results of analysis using the backscattering coefficient and coherence values from SAR images, the coherence was shown high in the region containing more of mud fraction due to higher viscosity of fine grain-size. A lot of tidal channels were well developed in the Ganghwa tidal flat, affecting the drainage of seawater and subsequent soil moisture content by exposure time of tidal flat. The backscattering coefficient. consequently, appeared to be lower in sand flat and mix flat with decrease of soil moisture. In contrast, most mud flats were distributed at high elevation so that soil moisture was not much influenced by seawater. The backscattering coefficient in mud flat seemed to have a relationship with the density of tidal channel. In addition, lowering backscattering coefficients in the all Ganghwa tidal flat was observed when surface remnant water increased according to the amount of rainfall. The correlation between backscattering coefficient, coherence and sediment environment factors in the Ganghwa tidal flat was investigated. In the future, more quantitative spatial analysis will be helpful to well understand the sedimentary influence of various sediment environment factors.

• 한국신재생에너지학회:학술대회논문집
• /
• 2009.06a
• /
• pp.486-490
• /
• 2009

In order to investigate the offshore wind resources, the "QuikSCAT Level 3" data by the QuikSCAT satellite was analyzed from Jan 2000 to Dec 2008. QuikSCAT satellite is a specialized device for a microwave scatterometer that measures near-surface wind speed and direction under all weather and cloud conditions. Wind speed measured at 10 m above from the sea surface as extrapolated to the hub height by using the power law model. It has been found that the high wind energy prevailing in the south sea and the east sea of the Korean peninsula. From the limitation of seawater depth for piling the tower and archipelagic environment around the south sea, the west and the south-west sea are favorable to construct the large scale wind farm. Wind map and monthly variation of wind speed are investigate at the positions.

• Journal of Advanced Marine Engineering and Technology
• /
• v.36 no.3
• /
• pp.341-350
• /
• 2012

In this paper we observe the protective coatings carbon for steel, aluminium and titanium alloys were obtained by plasma electrolytic oxidation (PEO) under unipolar and bipolar conditions. The anticorrosion properties and the thermal stability of the surface layers were studied by electrochemical impedance spectroscopy and potentiodynamic polarization. It was found that the application of the bipolar PEO mode enables one to synthesize the surface layers that possess enhanced anticorrosion and mechanical properties. results of research of antiscale PEO - coatings for marine power equipment are presented. The combined method of prevention of corrosion and scale formation was tested at the industrial plants of Russian Shipyard "Zvezda".

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2009.05a
• /
• pp.225-225
• /
• 2009

천연해수 중에서 음극방식에 의해 형성된 석회질 막은 장기적으로 외부 부식 환경을 차단하여 피방식체인 강재를 부분적으로 보호하거나 음극방식에 필요한 전류밀도를 감소시키는 역할을 하기도 한다. 한편 이렇게 형성된 석회질막 자체의 밀착력은 매우 취약하여 정상적인 막으로의 기능 수행이 곤란하다. 본 연구에서는 해수 환경 중 형성된 석회질 코팅막의 성분, 조직 및 결정구조 등을 분석하여 밀착성 향상에 기여할 것으로 추정되는 인자를 평가 선정함은 물론 제작 제어를 검토하였다.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2014.11a
• /
• pp.309-309
• /
• 2014

음극방식법은 피방식체에 외부전원을 인가하거나 보다 활성인 금속을 전기적으로 연결하여 피방식체의 전위가 일정 전위까지 음극분극 되도록 하여 부식을 억제하는 방법이다. 이러한 음극 방식의 결과로 $OH^-$이온이 금속 표면 부근에 생성되고 금속/해수 사이의 pH 증가를 유발하게 되며, 높은 pH는 $Mg(OH)_2$ 및 $CaCO_3$의 석출을 유발한다. 전착 박막은 각각 1, 3, 6, 12시간 및 5, 15, $20mA/cm^2$의 전류 밀도 조건에서 자연 해수, $CO_2$ 가스가 용해된 해수 용액 내에서 스틸 기판 상에 전기적 증착기술을 가해 형성되었다. 상기 조건에서 증착 된 박막의 내용물은 주사 전자 현미경 (SEM) 및 X-선회절(XRD)에 의해 조사되었다. 또한 코팅 박막의 내식성은 전기화학적 양극 분극시험에 의해 평가되었다.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2013.05a
• /
• pp.39-42
• /
• 2013

자동차 및 에너지 산업의 적용을 목표로 고망간강의 기계적 성질 향상 연구가 활발히 진행된 반면 내식성 연구는 미비하다. 본 연구에서는 염수 환경 및 H2S 환경에서 4종의 고망간강의 내식성에 미치는 크롬 및 망간의 영향을 조사하였다. 비교재로 사용된 탄소강 대비 실험재의 부식 속도는 침지 실험을 통해 얻어졌다. 또한 내식성 기구 고찰을 위하여 상평형 프로그램을 통하여 녹 층을 예측하고, 침지실험으로부터 얻어진 녹 층을 XRD, SEM-EDS 및 TEM-EDS로 분석하였다. 3.5% NaCl 용액에서 크롬 및 망간이 모두 내식성을 향상시킨 반면, synthetic seawater에서는 크롬만이 내식성을 향상시켰다. 또한 이들 염수 환경과 달리 H2S 환경에서 크롬과 망간 모두 내식성을 향상시키지 못했다. 환경에 따라 강의 내식성에 미치는 합금 원소의 영향이 상이한 원인은 각각의 환경에서 형성된 녹층의 구성 물질의 차이에 의한 것으로 이에 대하여는 본문의 된 녹 층 분석 결과에서 자세히 설명되었다.