• 대한치과교정학회지
• /
• 제13권2호
• /
• pp.147-154
• /
• 1983

This experiment was performed to study the effect of $PGE_2$ on the bone resorption at the tooth movement by orthodontic force. The experimental animals were the Sprague-Dawley strain rats. The orthodontic force was applied by the insertion of separating clamp made of 0.014' (0.356mm) wire to the interproximal site between the 2nd and the 3rd upper right molars. In experiment I, $0.2{\mu}g,\;0.4{\mu}g,\;0.8{\mu}g,\;and\;1.0{\mu}g\;PGE_2$ were locally injected at the submucosa near the 2nd molar of the maxilla each. The effect was detected by the count of the number of osteoclasts appeared at the compressed surface of interradicular bone. In experiment II, 1.0 mg/kg indomethacin (a specificc inhibitor of prostaglandin synthetas.) was subcutaneously injected. The effect was examined by the count of the number of cateoclasts appeared at the compressed surface of interradicular bone. The obtained results were follows; 1. The number of osteoclasts on the compressed surface of the interradicular bone increased in proportion to the increased dosage of $PGE_2$ administered. The number of osteoclasts increased significantly at the administration of $0.8{\mu}g\;and\;1.0{\mu}g\;PGE_2$ in contrast to the control (P<0.05). 2. The administration of 1.0 mg/kg indomethacin decreased the number of osteoclasts at the compressed bony surface significantly (P<0.01).

• Restorative Dentistry and Endodontics
• /
• 제23권1호
• /
• pp.366-378
• /
• 1998

Thermocondensation root canal filling technique have been used to fill accessary canals or to obtain homogeneous root caral fillings. But these thermocondensation technique inevitably produce heat in the canal which can be transmitted through the dentin and cementum and consequently damage periodontal ligamental cells and osteoblasts. In this study, System $B^{TM}$(Analytic technology, WA.D.S.A.) was used to evaluate the reaction of periodontal ligament tissue to "Continous Wave condensation technique" introduced by Buchanan, and the transmitted root surface temperature was measured according to measured root thicknesses. 12 Mandibular incisors of two adult dogs were used for the experiment. 6 controls were filled by lateral condensation technique with sealer.3 specimens were apically filled by Continuous Wave technique at $200^{\circ}C$ for 5 seconds and remaining 3 specimens were additionally backfilled using System $B^{TM}$(Analytic technology, WA.D.S.A.) was used to evaluate the reaction of periodontal ligament tissue to "Continous Wave condensation technique" introduced by Buchanan, and the transmitted root surface temperature was measured according to measured root thicknesses. 12 Mandibular incisors of two adult dogs were used for the experiment. 6 controls were filled by lateral condensation technique with sealer.3 specimens were apically filled by Continuous Wave technique at $200^{\circ}C$ for 5 seconds and remaining 3 specimens were additionally backfilled using System $B^{TM}$ at $100^{\circ}C$ for 20 seconds. Six weeks later, the dogs were sacrificed and the teeth stained with Hematoxylin and Eosin for histologic examination. 6 extracted human teeth were used to measure the transmitted temperature. After cutting off the crown, the canals were prepared and divided into 3 groups with root thickness of 1.5mm, 1.0mm, 0.5mm, 2 teeth in each group. Inside each root canal, System $B^{TM}$ was heated as with the temperature for the apically condensed and the back filled group, and the transmitted heat was measured on the external surface of the root. The temperature of System $B^{TM}$ heat spreader at $200^{\circ}C$ and $100^{\circ}C$ was also measured at root temperature. It can be concluded as follows: 1. In the thin area (200-$250{\mu}m$) of the root, root resorption could be seen even with heating at $200^{\circ}C$ for 5 seconds. 2. When the spreader was heated at $200^{\circ}C$ for 5 seconds and additionally at $100^{\circ}C$ for 20 seconds for backfill, all teeth showed root resorption regardless of their root thickness. 3. The transmitted external root surface temperature was higher as the root thickness decreased and as the heating time increased. In the thermocompaction technique using System $B^{TM}$, the spreader should be heated for the minimal time and used only in the apical area. The heated spreader shouldn't inserted to the binding point of the canal and backfilling should be done with other means of minimally heated gutta percha technique.

• 대한치과보철학회지
• /
• 제52권4호
• /
• pp.338-345
• /
• 2014

Jiro Abe법에 의한 완전틀니 제작 방법은 의치 상연부의 전체 주위를 가동 점막으로 봉쇄하는 것에 의해 연하 또는 교합 시 의치상 내면에서 일시적인 음압을 형성하여 의치의 유지와 안정을 강화할 수 있는 방법으로 소개되고 있다. 본 증례에서는 특히 하악 치조제가 심하게 흡수된 상하악 완전 무치악 환자에게 Jiro Abe법에 의한 인상채득과 의치 제작을 함으로써 임상적으로 의치의 안정성을 향상시키고, 환자의 만족도를 높였기에 이를 보고하는 바이다.

• 대한치과의사협회지
• /
• 제50권3호
• /
• pp.126-139
• /
• 2012

Loss of dentition can lead to not only compromised esthetics and functions of the patient, but also alveolar bone resorption. Bone grafting with prosthetic reconstruction of the gingiva can be selected for the treatment, and it provides many benefits as prosthetic gingival reconstruction does not require a complicated surgical process and is available within a short period of time, with stable clinical results. However, conventional porcelain fused to metal prosthesis has certain limits due to its size, and deformation after several firing procedures. In this clinical report, the author would like to introduce a patient with severe alveolar resorption who was treated with gingiva-shaped zirconia/titanium CAD/CAM implant fixed prosthesis for esthetic and functional rehabilitation. Clinical reports Clinical report 1, 2 : A case of loss of anterior dentition with atrophied alveolar bone. Implant retained zirconia bridge applied with Procera implant bridge system to simulate the gingiva. Upper structure was fabricated with zirconia all ceramic crown. Clinical report 3, 4 : A case of atrophied maxillary alveolus was reconstructed with fixed implant prosthesis, a CAD/CAM designed titanium structure covered wi th resin on its surface. Anterior dentition was reconstructed with zirconia crown. Conclusion and clinical uses. All patients were satisfied with the outcome, and maintained good oral hygiene. Zirconia/titanium implant fixed prosthesis fabricated by CAD/CAM system was highly accurate and showed adequate histological response. No critical failure was seen on the implant fixture and abutment overall. Sites of severe alveolar bone loss can be rehabilitated by implant fixed prosthesis with CAD/CAM system. This type of prosthesis can offer artificial gingival structure and can give more satisfying esthetics and functions, and as a result the patients were able to accept the outcome more fondly, which makes us less than hard to think that it can be a more convenient treatment for the practitioners.

• Journal of Periodontal and Implant Science
• /
• 제31권1호
• /
• pp.91-109
• /
• 2001

The purpose of this study is to evaluate histologically the resorption and tissue response of various resorbale membranes used for guided tissue regneration procedures, using a subcutaneous model on the dorsal surface of the rat. In this study, 12 Sprague-Dawley male rats(mean BW 150gm) were used and the commercially available materials included dense collagen membrane, freeze-dried bovine dura mater loos collagen membrane, PLA/PLGA membrane. Animals were sacrificed at 3, 6 and 8 weeks after implantation of various resorbable membranes. Specimens were prepared with Hematoxylin-Eosin stain for light microscopic evaluation. The results of this study were as follows: 1. Resorption : Loose collagen membrane group was resorbed most rapidly. Dense collagen membrane group and freeze-dried bovine dura mater group were rarely resorbed. 2. Inflammatory reactions : PLA/PLGA membrane group showed persistent and severe inflammatory reactions for 3 to 8 weeks. Moderate inflammatory reactions and the ectopic formation of calcified material were observed in dense collagen membrane group. Freeze-dried bovine dura mater group and loose collagen membrane group showed mild inflammatory reactions 3. In PLA/PLGA membrane group, multinucleated giant cells by foreign body reactions were observed. In conclusion, the resorption of freeze-dried bovine dura mater didn't happen for 3-6weeks, which showed the best bio-compatibility. Therefore, freeze-dried bovine dura mater was considered proper resorbable membrane for guided tissue regeneration.

• 대한치과교정학회지
• /
• 제41권5호
• /
• pp.361-370
• /
• 2011

Objective: Speedy surgical orthodontics (SSO), an innovative orthodontic treatment, involves the application of orthopedic forces against temporary skeletal anchorage devices following perisegmental corticotomy to induce movement of specific dental segments. Herein, we report the biological effects of SSO on the teeth and periodontal structures. Methods: Five beagle dogs were divided into 2 groups and their 6 maxillary incisors were retracted $en$ $masse$ by applying 500 g orthopedic force against a single palatal mini-plate. Retraction was performed without and with perisegmental corticotomy in groups I and II, respectively. All animals were killed on the 70th day, and their periodontal structures were processed for histologic analyses and scanning electronic microscopy (SEM). The linear distance between the third maxillary incisor and canine was used as a benchmark to quantify the retraction amount. Results: Retraction was markedly faster and retraction amount greater in group II than in Group I. Surprisingly, Group II did not show any root resorption despite extensive retraction, while Group I showed prominent root surface irregularities. Similarly, SEM showed multiple resorption lacunae in Group I, but not in Group II. Conclusions: SSO is an effective and favorable orthodontic approach for major en masse retraction of the maxillary anterior teeth.

• 대한치과보철학회지
• /
• 제49권3호
• /
• pp.206-213
• /
• 2011

연구 목적: 임플란트 경부까지RBM 표면 처리를 한 Osstem$^{(R)}$ USII plus system (Osstem Co., Seoul, Korea)의 임상적 유용성을 평가하기 위하여 연세대학교 치과대학 병원에 내원한 환자 중 이 system을 이용하여 치료 받은 32명의 환자에게 식립된 88개의 임플란트를 대상으로 기능 부하 후 1년까지의 임상적, 방사선학적 결과를 후향적으로 분석하였다. 연구 재료 및 방법: 진료 기록부를 통해 전신 조건, 성별, 연령, 식립 위치, 식립 된 임플란트의 직경 및 길이 등을 조사하여 그에 따른 분포 및 생존율의 차이와 함께 이들 항목이 변연골 흡수량에 영향을 미치는지 조사하였다. 방사선사진 분석으로 임플란트 식립 시, 보철물 장착 후 6개월 내지 1년간의 변연골 흡수량을 측정하여 분석하였다. 각 항목과의 연관성 분석을 위하여 독립 t-검정(independent sample t-test)을 이용하였으며(${\alpha}$=.05), 보철물 장착 전과 보철물 장착 후 12개월 동안의 변연골 흡수량 비교를 위하여 일원 반복측정 분산 분석(one-way repeated-measures ANOVA)을 이용하였다(${\alpha}$=.05). 결과:총 32명에게 식립된 88개의 임플란트 중에서 실패한 것은 없었으며 누적 생존율은 100%로 나타났다. 임플란트 식립 시부터 보철물 장착까지의 변연골 흡수량은 0.24 mm이었으며, 보철물 장착 후 12개월까지의 변연골 흡수량은 평균 0.19 mm로 임플란트 식립 시부터 보철물 장착 12개월까지의 총 변연골 흡수량은 0.43 mm였다. 상악에 식립된 경우와 하악에 식립된 경우의 변연골 흡수량을 비교했을 때는 통계적으로 유의한 차이를 보이지 않았으나 구치부에 식립된 경우가 전치부에 식립된 경우에 비해 변연골 흡수량이 크게 나타났으며 이는 통계적으로 유의한 차이가 있었다. 결론: 이상의 결과를 토대로 보철물 장착 12개월까지의 기간 동안 임플란트 고정체의 경부까지 RBM 표면 처리를 한 외측 연결형의 국산 임플란트의 단기간 임상적인 성공률은 만족스러운 결과를 보였으며 변연골 흡수량도 임플란트 성공 기준에 부합하였다.

• Applied Microscopy
• /
• 제24권1호
• /
• pp.59-76
• /
• 1994

Fine structure of the distal femoral epiphysis of growing mouse was studied by electron microscopy. The first morphological evidence of developing secondary center of ossification in the distal femoral epiphysis was found at newborn mouse. Ossification center was in the form of multiple foci of calcification and its cells were represented by remnant of degenerated cells within large lacunae that were separated by mineralized cartilaginous septa. Endochondral ossification beneath the articular cartilage proceeded in a less orderly manner than metaphyseal endochondral ossification. Columns of hypertrophied chondrocytes were not distinctly parallel to intercellular mineralized septa in all direction. Hypertrophied chondrocytes in the inner zone of the epiphseal center of ossification showed disintegrated. Resorption of mineralized cartilaginous septa was undertaken by perivascular cells and multinucleated chondroclasts. Resorption of the calcified cartilage was restricted to the region of ruffled border of the chondroclast. Growth along the metaphyseal side of the epiphyseal center of ossification was different from that along the articular surface. As the secondary center expanded toward the metaphyseal side, many vascular buds penetrated unmineralized cartilaginous septa and invaded viable chondrocytes. Many hypertrophied chondrocytes bodering the metaphyseal side of bone center remained viable after they became embedded in mineralized cartilaginous septa. This result suggested that the hypertrophied.

• 대한소아치과학회지
• /
• 제24권4호
• /
• pp.771-775
• /
• 1997

Ectopic eruption is defined as abnormal eruption and results in malpositioned teeth and abnormal root resorption of adjacent teeth. Ectopic eruption, first reported by Chapman, occurs in 3% of the population and that mostly in the maxilla. Etiologic factors include narrow maxilla, large maxillary teeth, retarded calcification of the first molar, inclined eruption path of the first molar and retruded position of the maxilla. Impaction of the second molar is rare and occurs mostly in the mandible. Major causes are large teeth and insufficient arch length. Halterman has devised a method of distalizing a ectopically erupting first molar by cementing a band on the second deciduous molar with a hook soldered and a button bonded to the occlusal surface of the first permanent molar. Ectopically erupted posterior teeth should be treated early to maintain normal development of the dentition, harmony of facial growth and occlusal support, a failure to do so could result in severe malocclusion, periodontal damage and continued root resorption of the adjacent teeth. Early detection and treatment is thus vital. The author is submitting this report as he has obtained favorable results in treating a patient who came to the SNUDH Dept. of Pediatric Dentistry complaining of the first molar by using a modified Halterman appliance.

• The Journal of Advanced Prosthodontics
• /
• 제5권2호
• /
• pp.172-178
• /
• 2013

PURPOSE. The purpose of this study was to assess the difference in efficacy between calcium metaphosphate (CMP)-coated implant fixtures and conventional resorbable blasted media (RBM) processed implant fixtures. MATERIALS AND METHODS. This study targeted 50 implants from 44 patients who visited Dankook University Dental Hospital. Implantations were done separately for RBM treated and CMP-coated implants, although their design was the same. Calcium metaphosphate has a quicker biodegradation process through hydrolysis compared to other phosphate calcium groups. For the first year of the implantation, the resorption volume of marginal bone analyzed via radiography and perio-test value were measured, under the check plan. Their analyses were composed of a non-inferiority trials test. A 95% level of reliability was used. RESULTS. In the comparative analysis of the resorption volume of marginal bone and the perio-test value, no statistically significant difference was found between the CMP-coated implants and RBM implants. CONCLUSION. One year after the implant placement, CMP-coated implants were found not to be inferior to the conventional RBM implants.