• Korean Journal of Medicinal Crop Science
• /
• v.17 no.2
• /
• pp.133-138
• /
• 2009

Nelumbo nucifera (lotus) is known to be a useful medicinal plant and leaf extract contains several flavonoids and alkaloids. To analyze the effect of Nelumbo nucifera leaves extract (NNL) on the HBsAg production, we treated NNL on HepG2.2.15 cells which contain the hepatitis B viral genome and secrete surface antigen into media. NNL suppressed the production of hepatitis B surface antigen as a dose-dependent manner. To analyze the effect of NNL on HBV DNA replication, PCR analysis was performed. NNL was not affected the HBV DNA replication and HBsAg mRNA expression. To understand the effect of NNL on the production of HBsAg, we carried out the analysis of lipid-metabolizing gene expression using one-step RT-PCR. NNL reduced the gene expression of FASN and SREBP2 and increased the expression of LDLR. Triglyceride content of HepG2.2.15 cells was not decreased by treatment of NNL. This result suggests a possibility that NNL may have an effect for the inhibition of hepatitis B surface antigen by modulation of lipid and cholesterol metabolism.

• BMB Reports
• /
• v.34 no.5
• /
• pp.452-456
• /
• 2001

Surface plasmon resonance has been used for a biospecific interaction analysis between two macromolecules in real time. Determination of an antibody that is capable of specifically interacting with the native form of antigen is very useful for many biological and medical applications. Twenty monoclonal antibodies against the $\alpha$ subunit of E. coli DNA polymerase III were screened for specifically recognizing the native form of protein using surface plasmon resonance. Only four monoclonal antibodies among them specifically recognized the native $\alpha$ protein, although all of the antibodies were able to specifically interact with the denatured $\alpha$ subunit. These antibodies failed to interfere with the interaction between the $\tau$ and $\alpha$ subunits that were required for dimerization of the two polymerases at the DNA replication fork. This real-time analysis using surface plasmon resonance provides an easy method to screen antibodies that are capable of binding to the native form of the antigen molecule and determine the biological interaction between the two molecules.

• Applied Microscopy
• /
• v.12 no.2
• /
• pp.11-22
• /
• 1982

The morphological development of Mycoplasma pneumoniae attached to solid surfaces was examined by light and electron microscopies. Critical point drying and carbon replication techniques revealed that during the growth cycle of developing microcolonies, the morphological form coincided with the pH of the culture. M. pneumoniae appeared to have a well defined morphology associated with age of the culture. The organisms were dimorphic, with round cells capable of reproduction and segments consisting of a spindle shaped body with one pointed and one knob-like end. Starting with single cells, there were the following stages in the development of a culture: replication stage through binary fission and segmentation, stage of confluency, and a degeneration stage into rough spherical forms. The round cells appearrd to replicate by binary fission during the lag and early log phases of growth, while spindle segments replicated by segmentation during most of the logarithmic growth. The growth of the filaments and replication of the segments occured at the knob-like ends, showing a type of polarity, and formed a meshwork across the surface. This development could be cycled under favorable growth conditions, but the culture aged and when the conditions became adverse(e.g. pH 6.8 or lower), filamentous cells converted to spherical forms, losing their reproductive capability.

• The Korean Journal of Zoology
• /
• v.28 no.3
• /
• pp.166-178
• /
• 1985

In order to express hepatitis B surface antigen $(HB_sAg)$ containing pre-surface antigen region in mammalian calls, 2.7 kb DNA fragment containing pre-surface region-$HB_sAg$ gene poly(A) addition site of HBV genome was cloned into simian virus 40(SV 40) based chimeric vector pSVOB. 2.7 kb DNA fragment was derived from pHBVD 107 containing tandem copies of the HBV genome in a head-to-tail arrangement by Bgl II digestion. Construction of the vector pSVOE involved the incorporation of SV40 sequences spanning the viral origin of replication and 72 bp repeats (enhancer) into a pBR 322 derivative lacking sequences which inhibit replication in mammalian cells. Bam HI linker was inserted at the Pvu II site in the proximity of SV40 late promoter of pSVOE and named as pSVOB. To construct the recombinant plasmid pSVBS, pHBVD 107 was digested with Bgl II to isolate 2.7kb DNA fragment and the fragment was ligated into the Bam HI site of pSVOB by ligation. Preliminary result showed that the recombinant plasmid pSVBS produced $HB_sAg$ in the monkey cell producing large T antigen (COS cell).

• Journal of the Korean Institute of Gas
• /
• v.25 no.5
• /
• pp.30-36
• /
• 2021

Residual life assessment of reformer tubes of mod HP steel used in the refinery and petrochemical industry were investigated by quantitative metallographic evaluation method. Area fractions of precipitated carbides were measured by using surface replication and its relationship with the remaining life of the tube was investigated. The microstructures of the virgin and other tubes were examined using optical microscopy (OM) for service periods of 1.8, 6.0, 7.2, 8.5, 9.7, and 16.2 years at 950 ℃ and the area fractions of the precipitates were measured by image analysis using ImageJ software. As the area fraction of the precipitates increased, the residual life was decreased accordingly. The results showed that the LMP was the highest in the virgin and the LMP decreased as the service time increased and the residual life decreased. A regressional equation showing the relation between the area fraction of carbides and LMP was experimentally derived. The obtained relationship can be used with the surface replication method for on-site residual life assessment.

• Tribology and Lubricants
• /
• v.32 no.6
• /
• pp.201-206
• /
• 2016

In this study, we attempt to produce a semi-elliptical riblet with a shark skin-like surface using wire electrical discharge machining (WEDM) and micro molding techniques. Our design for the production of the semi-elliptical mold includes an electrode, a winding roller, and a guide on the WEDM system. A replication mold with negative riblets is machined using WEDM, and a shark skin inspired surface with positive riblets is fabricated using a micro molding technique. For a comparison with the original shark skin, a shark skin replica is also produced using the micro molding technique directly from a shark skin template. Droplet contact angles on a flat surface, the shark skin replica, and the epoxy resin-based micro riblet shark skin-like surface are evaluated. The effect of a Teflon coating on the contact angles for the three different surfaces is also investigated. The results show the micro riblet with a shark skin-like surface has a similar contact angle as the shark skin replica, which means that the simplified riblet shark skin surface strongly influences the performance of wettability. This study confirms the effectiveness of using the WEDM method to prepare hydrophobic surfaces with diverse surface patterns.

• Tribology and Lubricants
• /
• v.29 no.5
• /
• pp.304-309
• /
• 2013

Shark skin has functionalities such as self-cleaning and antifouling; it also exhibits excellent drag reduction owing to a hierarchical structure of microgrooves and nanometer-long chain mucus drag reduction interfaces around the shark body. In this study, the wettability of a shark skin surface and its replicas are evaluated. First, a shark skin template is taken from a real shark. Then, shark skin replicas are produced directly from a shark skin template, using a micromolding technique. The quantitative replication precision of the shark skin replicas is evaluated by comparing the geometry of the shark skin template to the replica using 2D surface profiles. Contact angles at the solid-air-water interfaces are evaluated for the shark skin template and its replicas under two conditions: with and without hydrophobic coating. The results show that the microriblets on shark skin improve the hydrophobic feature and play a critical role in self-cleaning.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2005.05a
• /
• pp.47-50
• /
• 2005

In this study, micro mirror array for small form factor optical pick-up was replicated by micro UV-molding. First, mold for micro mirror array was fabricated using micromachining. Also, to analyze the characteristics of the surface quality, flatness of replicated mirror surface were measured by white light scanning inteferometry system. The results show that the micro mirror array with a sufficient surface quality can be obtained by polymer replication process.

• Journal of the Korean Society for Precision Engineering
• /
• v.29 no.11
• /
• pp.1256-1263
• /
• 2012

The present study covers the ultrasonic patterning process to replicate micro-patterns on a polymer substrate. The ultrasonic patterning process uses ultrasonic waves to generate frictional heat between an ultrasonic horn and the polymer substrate, from which the surface region of the polymer substrate is softened sufficiently for the replication of micro-patterns. The ultrasonic patterning process can divided into two categories according to the direction of vibration transmission: direct patterning and indirect patterning. The direct patterning uses a patterned horn, and the ultrasonic vibration is transferred directly from the patterned horn to the substrate. On the contrary, the indirect patterning process uses a plain horn, and the micro-patterns are engraved on a mold that is located below the substrate. Thus, the micro-patterns are replicated as an indirect manner. In this study, these direct and indirect patterning processes are compared in terms of the replication characteristics. Additionally, the possibility of double-side patterning is also discussed in comparison with the conventional single-side patterning process.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2003.05a
• /
• pp.481-484
• /
• 2003

In this study, we fabricated the master metallic nano-stamper with nano pillar patterns to apply replication processes which is adequate for mass production. Master nano patterns with various hole diameters between 300 nm and 1000 nm was fabricated by e-beam lithography. After the seed layer was deposited on the master nano patterns using e-beam evaporation, the nickel was electroformed. In each step, the shape and surface roughness of their patterns were analyzed using SEM and AFM.