• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2011.04a
• /
• pp.273-276
• /
• 2011

표면의 물성은 표면효과를 고려한 나노 스케일의 구조물의 기계적 거동 해석에 있어서 필수적인 요소이다. 이러한 해석을 위한 방법론 중 surface relaxation model을 이용하여 박막의 표면 물성을 계산하는 방법은 이미 FCC 모델에서는 검증된 바 있으나, 동일한 방법론을 diamond 구조를 가지는 실리콘에 일괄적으로 적용할 수는 없다. 이는 FCC 구조를 갖는 금속과는 달리 실리콘이 공유결합 물질이라는 점과, 박막표면에서 다양한 surface reconstruction이 가능하다는 점, 그리고 실리콘의 diamond lattice가 FCC lattice에 비해 추가적인 자유도가 존재한다는 점으로부터 기인한다. 본 논문에서는 이와 같은 조건을 고려하여 Si 박막의 표면 물성을 해석하기 위한 surface relaxation 모델을 제시한다.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.22 no.4
• /
• pp.331-334
• /
• 2009

In this paper, we present a surface relaxation model in atomistic calculations for thin nanofilms. This surface relaxation model is very simple model which have only two degrees of freedoms to determine the atomic positions of nanofilms. Whereas in conventional molecular statics simulations, the same number of degrees of freedoms at all atom positions are used as unknown variables. In order to prove the reliability of the presented model, we present the results of self-equilibrium strain calculations with the surface parameters obtained from this model.

• Steel and Composite Structures
• /
• v.16 no.6
• /
• pp.703-718
• /
• 2014

The initial clamping forces of high strength bolts subjected to different faying surface conditions drop within 500 hours regardless of loading, any other external force or loosening of the nut. This study develops a mathematical model for relaxation confined to creep on a coated faying surface after initial clamping. The quantitative model for estimating relaxation was derived from a regression analysis for the relation between the creep strain of the coated surface and the elapsed time for 744 hours. This study establishes an expected model for estimating the relaxation of bolted joints with diverse coated surfaces. The candidate bolts are dacro-coated tension control bolts, ASTM A490 bolt, and plain tension control bolts. The test parameters were coating thickness, species of coating. As for 96, 128, 168, and $226{\mu}m$ thick inorganic zinc, when the coating thickness was increased, relaxation after the initial clamping rose to a much higher range from 10% to 18% due to creep of the coating. The amount of relaxation up to 7 days exceeded 85% of the entire relaxation. From this result, the equation for creep strain can be derived from a statistical regression analysis. Based on the acquired creep behavior, it is expected that the clamping force reflecting relaxation after the elapse of constant time can be calculated from the initial clamping force. The manufacturer's recommendation of inorganic zinc on faying surface as $75{\mu}m$, appears to be reasonable.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2009.04a
• /
• pp.34-37
• /
• 2009

본 논문에서는 원자적 계산(atomistic calculation)을 이용한 나노박막의 평형상태(self-equilibrium state)에 대한 해석기법을 제시한다. 두께가 얇은 나노박막은 표면 응력(surface stress)에 의한 영향으로 원자간 거리가 벌크상태의 거리보다 작아진다. 두께가 얇은 나노박막에서의 원자 사이의 거리는 표면 응력과 탄성계수들의 표현식으로 계산이 가능하며, 본 논문에서는 {100}, {111}, {110} 표면을 가지는 나노박막의 평형상태의 해석을 위한 해석적 방법을 제시한다. 원자 사이의 거리를 계산하기 위해서는 보다 정확한 표면 응력의 계산방법이 필요하다. 본 연구에서는 나노박막의 평형상태에 대한 해석을 위해 surface relaxation model을 제시하고, 이 모델을 이용하여 표면응력(surface stress)과 표면강성계수(surface stiffness tensor)와 같은 surface parameter의 계산을 수행한다. 본 논문에서 제시된 surface relaxation model을 검증하기 위하여 분자동역학 전산모사(molecular dynamics simulation)의 수치 결과를 제시하고, 본 연구에서 계산한 equilibrium strain과 비교 검증한다.

• Journal of Advanced Marine Engineering and Technology
• /
• v.19 no.2
• /
• pp.81-91
• /
• 1995

A miniature size electrostatic induction motor has been fabricated and studied with emphasis on the role of the surface resistivity, the relative dielectric constant of the rotor surface materials and the rotor liner materials, which control the charge induction and relaxation on the rotor surface and the field intensity between the rotor and the stator. It is found that the higher resitivity and/or the higher relative dielectric constant, concurrently the longer relaxation time constant of the rotor surface materials make the motor speed get higher speed. In case of discrete coated rotor surface it is found that the motor speed was increased logarithmically as narrow as width of the discrete coated Ti. And the degree of width of discrete coated Ti to the axial direction of the rotor was $60^{\circ}$ and $150^{\circ}$, the motor has got a 125% higher than that at the degree of $0^{\circ}$.

• Journal of the Microelectronics and Packaging Society
• /
• v.21 no.4
• /
• pp.57-62
• /
• 2014

Using flexible bismaleimide-triazine co-polymer as a substrate, inkjet-printed Cu films were also investigated for low-cost and process feasibility of flexible electronics. After annealing at $200^{\circ}C$ for 1 h under various reducing ambient, surface color was changed to red and electrical resistivity was decreased to the level of conductor under formic acid ambient. However, its resistivity was much higher than conventional copper films due to surface crack. In order to reduce the residual film stress after annealing, additional isothermal treatment was inserted before anneal hiring the stress relaxation applied in processes of amorphous materials. As a result, no surface crack was observed and electrical resistivity of $3.4{\mu}{\Omega}cm$ was measured after annealing at $230^{\circ}C$ with stress relaxation while electrical resistivity of $7.4{\mu}{\Omega}cm$ was observed after normal annealing without relaxation. The effect of stress relaxation was also confirmed by observing surface crack after decreasing the relaxation time to 0 min.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.11a
• /
• pp.168-169
• /
• 2006

The physical properties of DMPC monolayer were made for dielectric relaxation phenomena by the detection of the surface pressures and displacements current. The phospolipid monolayer of dielectric relaxation takes a little time and depend on the molecular area.

• Journal of Magnetics
• /
• v.15 no.2
• /
• pp.45-50
• /
• 2010

We investigated the magnetism of vanadium monolayers on a Pd(001) surface. The electronic structure and the magnetic properties of the V/Pd(001) system were determined with the use of the full-potential linearized augmented plane-wave method within the general gradient approximation. Three magnetic configurations were studied: non-, ferro-, and antiferromagnetic. From the total energy calculations, we found that the V/Pd(001) system is the most stable in the antiferromagnetic configuration. The importance of relaxation on the magnetic properties of the systems was also studied. It was found that the Pd(001) surface covered with a V monolayer undergoes considerable relaxation in which the spacing between Pd layers increases in all three magnetic configurations. Contrary to the Pd interlayer spacing, the distance between the V overlayer and the topmost Pd layer is reduced. The interlayer spacing between the V overlayer and the Pd surface layer is the largest for the antiferromagnetic configuration. In the relaxed antiferromagnetic structure, the magnitude of the calculated magnetic moments on the V atoms was $1.31\;{\mu}_B$. The presence of the vanadium monolayer does not affect the paramagnetic properties of the Pd(001) surface.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.05c
• /
• pp.9-13
• /
• 2004

In this paper, evaluation of physical properties about dielectric relaxation phenomena by the detection of the surface pressures and displacements current on the monolayer films of phospolipid monomolecular DLPC, DMPC using pressure stimulus. As a result, the changed surface pressure, displacement current and the transition forms of dipole moment of phospolipid monomolecular in area per molecular by pressure stimulus were conformed well. It was known that the monolayers by linear relationship for decision of dielectric relaxation time between compressure speed and molecule area By according to the linear relationship relation get that frictional constant, DLPC was $1.89{\times}10^{-19}$[Js] and DMPC was $0.722{\times}10^{-19}$[Js]. It is found that the phospolipid monolayer of dielectric relaxation takes a little time and depend on the molecular area.

• Journal of Magnetics
• /
• v.1 no.1
• /
• pp.9-13
• /
• 1996

The effects of surface relaxation on surface and interface magnetism in Fe/Cr (001) are investigated using the highly precise all-electron total-energy full-potential linearized augmented plane wave method. The Fe-Cr interlayer spacing is deter-mined by total-energy calculation and it is found to be relaxed downward by 18%. For the relaxed system, the magnetic moment of surface Fe is highly suppressed to be $1.72\mu_B$compared to the unrelaxed case ($2.39\mu_B$). This reduction of magnetic moment is considered as a result of the enhanced hybridization between Fe-d and Cr-d states, which can be seen from the calculated density of states. This work suggests the importance of effect of relaxation to the surface and interface magnetism in Fe/Cr system.