• 제목/요약/키워드: surface reforming

검색결과 111건 처리시간 0.025초

수소제조용 FeCrAl 다공체의 내구성 향상을 위한 산화물 형성 (Oxide Layer formation of FeCrAl Foam for the Reliability Improvementin Hydrogen Generation)

  • 이근재;장대환;양현석;공만식
    • 한국표면공학회:학술대회논문집
    • /
    • 한국표면공학회 2014년도 추계학술대회 논문집
    • /
    • pp.101-102
    • /
    • 2014
  • 수소제조용 SMR(steam methane reforming) 공정에 사용될 수 있는 FeCrAl 다공체의 지지체-촉매의 결합력을 향상시키기 위하여 PEO(plasma electrolytic oxidation)법을 이용하여 FeCrAl 표면에 산화물을 형성시켰다. 열처리, 저전압, 고전압, 전해질 농도 등의 공정 조건에 따른 산화막의 형성 거동 및 형성된 산화물의 상분석 등을 진행하였다. PEO 공정을 이용하여 형성된 산화막은 다른 공정에 의하여 형성된 산화막과 비교할 때 치밀한 특징을 보였다. 따라서 본 연구를 통하여 향후 SMR 공정에 사용될 수 있는 FeCrAl 다공체의 내구성 및 수명 향상에 도움을 줄 것으로 기대되었다.

  • PDF

동절기 단열갱폼의 발열량 변화 측정에 관한 연구 (A Study on the Calorific Value of Insulated Gang-form in Winter)

  • 강인선;원준연;김태희;김성덕;최석;남경용
    • 한국건축시공학회:학술대회논문집
    • /
    • 한국건축시공학회 2017년도 추계 학술논문 발표대회
    • /
    • pp.135-136
    • /
    • 2017
  • This paper examines the efficiency of the application of conventional and insulated gang forms for curing and protection of concrete by comparing the amount of electric energy required therefor. In addition, a thermal vision camera was used to identify heat loss from surfaces of the gang forms after each placement of concrete. Experimental results, show that the heat loss at the submerged temperature was large at the submerged surface due to the large calorific value at the surface of the mold. The insulated gang form had some heat loss in the horizontal bars. In the case of adiabatic reforming, the pattern shows a constant calorific value over time. In conclusion, the insulation performance is better than that of general gang form.

  • PDF

폴리프로필렌 수지 복합을 위한 텐셀 재생섬유의 소수화 표면개질 특성 연구 (A Study on the Hydrophobicity Modification and Physical Properties of Tencel Regenerated Fibers for Polypropylene Resin Composites)

  • 윤성현;김미경;이은수
    • 한국염색가공학회지
    • /
    • 제33권4호
    • /
    • pp.258-268
    • /
    • 2021
  • This study conducted on the introduction of recycled cellulose fibers, which are widely used in the textile industry as eco-friendly biomass materials, into polypropylene resins, which are mainly used for interior and exterior materials such as door trims and console parts of automobiles. In general, cellulose fibers can affect mechanical properties and have a lightening effect when used as a reinforcing agent. However, since cellulose fibers have hydrophilic properties and have relatively low compatibility with industrial polymer resins, they are used in combination through fiber hydrophobic surface treatment. Therefore, through this study, the reforming reaction conditions optimized in terms of hydrophobicity and workability for cellulose fibers are studied. Furthermore, polypropylene containing surface-modified cellulose fibers was prepared to compare physical properties by fiber content and study optimized content.

Hybridization system을 이용한 유산균의 장용성 건식 피복 (Dry Enteric Coating Process of Lactic Acid Bacteria by Hybridization System)

  • 박동준;안은영;김재승;임지영;한경식;김세헌;오세종
    • 한국식품과학회지
    • /
    • 제34권5호
    • /
    • pp.856-861
    • /
    • 2002
  • 유산균의 활용성을 증진시키기 위한 방안으로서 건식 Hybridization system을 이용하여 장용성 피복재로 유산균분말의 표면처리를 실시하였다. 전자현미경 관찰 결과 표면처리는 유산균의 표면을 매끄러운 구형의 모양으로 변화시켰으며 표면처리를 통한 분체복합화 과정에서 유산균의 활력은 유의적인 변화없이 유지되었다. 또한 유산균의 내염성은 처리여부에 따른 유의적 변화를 보이지 않음으로써 표면처리 과정 중 유산균 세포막의 물리적 손상은 일어나지 않은 것으로 판단된다. 표면처리된 유산균의 내산성은 처리전후에 차이를 나타내지 않았으나 이는 균주 자체의 높은 내산성에 기인한 것으로 판단된다. 표면처리 후의 유산균은 유의적으로 높은 열저항성을 보여 표면처리가 유산균의 내열성 향상을 위하여 활용될 수 있는 가능성을 나타냈다. 조사된 장용성 피복재 중 Sureteric은 다른 피복재에 비하여 우수한 표면 처리 효과를 보였으며 유산균분말의 표면처리를 위한 적합한 처리조건은 유산균의 초기입도가 $100{\sim}200\;{\mu}m$, 유산균:피복재의 혼합비율(w/w)은 9 : 1, 처리속도는 15,000 rpm, 3분이었다.

Effects of Atmospheric Pressure Microwave Plasma on Surface of SUS304 Stainless Steel

  • Shin, H.K.;Kwon, H.C.;Kang, S.K.;Kim, H.Y.;Lee, J.K.
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 2012년도 제43회 하계 정기 학술대회 초록집
    • /
    • pp.268-268
    • /
    • 2012
  • Atmospheric pressure microwave induced plasmas are used to excite and ionize chemical species for elemental analysis, for plasma reforming, and for plasma surface treatment. Microwave plasma differs significantly from other plasmas and has several interesting properties. For example, the electron density is higher in microwave plasma than in radio-frequency (RF) or direct current (DC) plasma. Several types of radical species with high density are generated under high electron density, so the reactivity of microwave plasma is expected to be very high [1]. Therefore, useful applications of atmospheric pressure microwave plasmas are expected. The surface characteristics of SUS304 stainless steel are investigated before and after surface modification by microwave plasma under atmospheric pressure conditions. The plasma device was operated by power sources with microwave frequency. We used a device based on a coaxial transmission line resonator (CTLR). The atmospheric pressure plasma jet (APPJ) in the case of microwave frequency (880 MHz) used Ar as plasma gas [2]. Typical microwave Pw was 3-10 W. To determine the optimal processing conditions, the surface treatment experiments were performed using various values of Pw (3-10 W), treatment time (5-120 s), and ratios of mixture gas (hydrogen peroxide). Torch-to-sample distance was fixed at the plasma edge point. Plasma treatment of a stainless steel plate significantly affected the wettability, contact angle (CA), and free energy (mJ/$m^2$) of the SUS304 surface. CA and ${\gamma}$ were analyzed. The optimal surface modification parameters to modify were a power of 10 W, a treatment time of 45 s, and a hydrogen peroxide content of 0.6 wt% [3]. Under these processing conditions, a CA of just $9.8^{\circ}$ was obtained. As CA decreased, wettability increased; i.e. the surface changed from hydrophobic to hydrophilic. From these results, 10 W power and 45 s treatment time are the best values to minimize CA and maximize ${\gamma}$.

  • PDF

nano-ATH 첨가를 통한 엔지니어링 플라스틱의 표면개질 (Surface Reforming of Engineering Plastic for adding nano-ATH)

  • 허준;이승수;정의환;임기조;강성화
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2009년도 하계학술대회 논문집
    • /
    • pp.259-259
    • /
    • 2009
  • Surface contamination and leakage current have caused operating problems. A flashover in a substation may result in destruction of an insulator or many others electrical equipment. Engineering plastics have good characteristic (light weight, good productivity and little of void) as compare with epoxy or porcelain insulators. Outdoor insulator must have resistance to contamination. However, they are not suited to outdoor insulator by reason of being not good hydrophobic. RTV has a good property of hydrophobic and ATH has characteristic obstructing exothermic reaction. In order to reduce the incidence of insulator flashover and damage, the silicon rubber contained nano size ATH coat on surface of engineering plastics. In this paper, it compares resistance tracking of the engineering plastic coated RTV with that of non-coated engineering plastic and ATH filled composites performed much better than non-filled composites.

  • PDF

Self-cleaning 침투성 함침제의 적용에 따른 타일 및 콘크리트 표층부의 개질특성 (Reforming Property of Tile and Concrete Surface layer Using Self-cleaning Concrete Impregnant)

  • 송훈;전찬수;김영호
    • 한국디지털건축인테리어학회논문집
    • /
    • 제13권4호
    • /
    • pp.61-68
    • /
    • 2013
  • Concrete structure is not the only material vulnerable to physical and chemical processes of deterioration associates with severe conditions. Deterioration of the concrete structure, however, occurs more progressively from the outside of the concrete exposed to severe conditions. Especially, Carbonation, chloride ion attack is more important factor of concrete durability. This study is interested in manufacturing the self-cleaning concrete surface impregnant including TEOS, lithium silicate for the repair of the exposed concrete surface and the color concrete requiring the advanced function in view of the concrete appearance. Form the results, TEOS and lithium silicate are very effective that increasing the concrete durability using self-cleaning concrete impregnant. Self-cleaning concrete impregnant specimens is satisfied with performance requirement of KS standard in adhesion test in tension but the reinforcement of concrete substrate is slight. So, the self-cleaning concrete impregnant of this study is more desirable for the improvement of durability rather than the reinforcement.

$TiO_2$-Ni inverse Catalyst for CRM Reactions with High Resistance to Coke Formation

  • Seo, Hyun-Ook;Sim, Jong-Ki;Kim, Kwang-Dae;Kim, Young-Dok;Lim, Dong-Chan
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 2012년도 제42회 동계 정기 학술대회 초록집
    • /
    • pp.267-267
    • /
    • 2012
  • $TiO_2$-Ni inverse catalysts were prepared using atomic layer deposition (ALD) process and catalytic $CO_2$ reforming of methane (CRM) reaction over catalysts (either bare Ni or $TiO_2$ coated-Ni particles) were performed using a continuous flow reactor at $800^{\circ}C$. $TiO_2$-Ni inverse catalyst showed higher catalytic reactivity at initial stage of CRM reactions at $800^{\circ}C$ comparing to bare Ni catalysts. Moreover, catalytic activity of $TiO_2$/Ni catalyst was kept high during 13 hrs of the CRM reactions at $800^{\circ}C$, whereas deactivation of bare Ni surface was started within 1hr under same conditions. The results of surface analysis using SEM, XPS, and Raman showed that deposition of graphitic carbon was effectively suppressed in a presence of $TiO_2$ nanoparticles on Ni surface, thereby improving catalytic reactivity and stability of $TiO_2$/Ni catalytic systems. We suggest that utilizing decoration effect of metal catalyst with oxide nanoaprticles is of great potential to develop metal-based catalysts with high stability and reactivity.

  • PDF

플라즈마를 이용한 신발소재의 환경 친화적인 접착 표면 처리(I) (Leather's Environment-friendly Adhesion Surface Treatment of shoe's material by Plasma)

  • 하선희;장유진;설수덕
    • 접착 및 계면
    • /
    • 제6권2호
    • /
    • pp.6-12
    • /
    • 2005
  • 플라즈마는 고체, 액체, 기체와 더불어 제 4의 물질상태로 불리어지고 있는데, 기체의 일부가 전리된 가스상태이며 외부기장에 영향을 받고 전기를 통과시키면 발광하는 에너지가 높은 기체의 영역으로 정의된다. 인위적으로 에너지를 가하여 플라즈마를 발생시켜 많은 부분에서 새로운 첨단 연구가 활발하게 이루어지고 있으며, 많은 부분들이 우리의 생활에 들어와 있다. 플라즈마를 이용하여 고분자물의 표면을 처리하게 되면 몇 가지 장점이 있다. 먼저 플라즈마는 표면의 물성만을 변화시켜 고분자 본 물성을 유지시켜주고, 유기용제를 사용하지 않으며, 공정 운행 중 발생하는 폐기물이 없어 환경친화적이며, 상압 플라즈마의 경우 자동화 연속공정이 가능하다. 본 실험에서는 신발소재 고분자 재료의 상호 접착능력을 향상시키기 위하여 플라즈마를 사용하여 표면 개질을 시도하였고, 처리 시간과 사용한 가스의 유량에 따른 박리강도 시험을 통하여 접착력 향상을 확인하였고, 접촉각 측정과 SEM 측정을 통하여 고분자 표면 변화를 확인하였다.

  • PDF

Ni/γ-Al2O3 촉매상에서 이산화탄소에 의한 프로판의 개질 (Reforming of Propane by Carbon Dioxide using Ni/γ-A12O3 Catalysts)

  • 김경훈;김종화;장성진;박대원
    • 공업화학
    • /
    • 제8권3호
    • /
    • pp.382-388
    • /
    • 1997
  • 본 연구는 펄스 반응기 및 고정층 연속반응기를 사용하여 ${\gamma}$-알루미나에 담지된 니켈촉매상에서 이산화탄소에 의한 프로판의 개질반응 특성을 고찰한 것이다 Ni/${\gamma}$-$A1_2O_3$촉매가 NiO/${\gamma}$-$A1_2O_3$촉매보다 $CO_2$의 해리능력과 프로판의 개질 능력이 우수한 것으로 나타났다. 프로판과 $CO_2$의 혼합물에 산소를 추가한 결과 프로판의 전환율이 증가하였고 표면의 탄소침적도 감소함을 알 수 있었다. Ni/${\gamma}$-$A1_2O_3$$Ga_2O_3$의 기계적 혼합 촉매는 Ni/${\gamma}$-$A1_2O_3$자체보다 촉매의 활성이 오래 유지되었고 두 상의 협동에 의한 상승효과(synergistic effect)가 관찰되었다.

  • PDF