• 한국지구물리탐사학회:학술대회논문집
• /
• 한국지구물리탐사학회 2003년도 Proceedings of the international symposium on the fusion technology
• /
• pp.383-389
• /
• 2003

Clay minerals show a distinct induced-polarization phenomenon, which is one of the most important factors for predicting groundwater flow and contaminant transport. This paper presents a step-by-step process to estimate Cole-Cole parameters from spectral induced-polarization (IP) data measured on the surface of three-dimensional earth. First, the inversion of low-frequency resistivity survey data is made to identify the dc resistivity ${\rho}_dc$ of a volume having IP effects. The other parameters, chargeability m, time constant $\tau$, and frequency dependence c, are sought for the polarizable volume. Next, using multi-frequency data, c can be obtained as high or low asymptotes of the slope of log phase vs. log frequency. Further, for low m, intrinsic $\tau$ is approximated by apparent one, ${\tau}_a$, which is derived from the relation ${{\omega}{\tau}}_a$=1 at an angular frequency $\omega$, where the imaginary component of spectral IP data has an extreme value. Finally, to obtain intrinsic m a two-step linearized procedure has been derived. For a body of given $\tau$ and c, forward modeling with a progression of m values yields a plot of observed vs. intrinsic imaginary components for a frequency. Since this plot is essentially linear, to extract the intrinsic imaginary component is quite simple with an observed value. Using the plot of intrinsic imaginary component vs. m, intrinsic m is determined. We present a synthetic example to illustrate that the Cole-Cole parameters can be recovered from spectral IP data.

• 한국농공학회논문집
• /
• 제46권1호
• /
• pp.87-97
• /
• 2004

The paper presents the results from the applications of the Water Erosion Prediction Project (WEPP) model to a single plot, and also a small watershed in the Mid Korean Peninsula which is comprised of hillslopes and channels along the water courses. Field monitoring was carried out to obtain total runoff, peak runoff and sediment yield data from research sites. For the plot of 0.63 ha in size, cultivated with com, the relative error of the simulated total runoff, peak runoff rates, and sediment yields using WEPP ranged from -16.6 to 22％, from -15.6 to 6.0％, and from 23.9 to 356.4％ compared to the observed data, respectively. The relative errors for the upland watershed of 5.1 ha ranged from -0.7 to 11.1 ％ for the total runoff, from -6.6 to 35.0 ％ for the sediment yields. The simulation results seem to justify that WEPP is applicable to the Korean dry croplands if the parameters are correctly defined. The results from WEPP applications showed that the major source areas contributing sediment yield most are downstream parts of the watershed where runoff concentrated. It was suggested that cultural practice be managed in such a way that the soil surface could be fully covered by crop during rainy season to minimize sediment yield. And also, best management practices were recommended based on WEPP simulations.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제49권11호
• /
• pp.729-736
• /
• 2000

This paper deals with the characteristic analysis of magnetizer for convergence purity magnet by the finite element method. The analysis utilizes combined method of the time-stepped finite element analysis and the Preisach model with hysteresis phenomena. In the finite element analysis, the non-linearity and the eddy current of the magnetizing fixure and permanent-magnet are taken account. The magnetization distribution in the permanent magnet is determined by using Preisach model which are composed of Everett function table and the first order transition curves is obtained by the Vibrating Sample Magnetometer. The calculated flux density values on the surface of the permanent magnet are led to the approximated gauss density values measured by the gauss meter. As a result, winding current, copper loss, eddy current loss of the magnetizing yoke, flux plot, surface gauss plot, temperature rise of the coil and resistor variation, vector diagram of magnetization distribution are shown.

• 미생물학회지
• /
• 제15권1호
• /
• pp.20-30
• /
• 1977

Relationship of soil properties and seasonal variation on microbilogical population to-continuous culture and first-time culture of ginseng was investigated by bimonthly from May 1976 to January 1977. pH and P contents of 2 years continuous culture of soil were higher than other culture plot of soil, and contraty to the above, 2 years first-time culture of ginseng soil was conplot of soil, and contraty to the above, 2 years first-time culture of ginseng soil was contained more potassium contents than other culture plot of soil. In microbiological fluctuation with seasonr in various soil conditions, the population, trends of Fusarium spp., Erwiniaspp., and flourescent Psedudomonas spp. were increased in May and July in general, but decreased in the other month. It was observed that in all type of soil, Fusarium spp. was distributed in abundance in and on rihizosphere, and decreased the propagules numbers as soil depth increase. The numbers of Erwinia spp. and fluorescent Pseudo-monas spp. were distributed greater in numbers on the surface zone of soil depth decreasing the numbers along the soil layer increase, and also in 2years continuous culture of soil especially, a great numbers of Erwinia spp. and fluorescent Pseudomonas were evenly distributed in surface zone and rhizosphere. Ginseng disease with a high incidence of bacterial disease in continuous culture of 2 and 4 years was seemed to be associated with soil bacteria that was high in numbers of Erwinia spp. and fluorescent Pseudomonas spp. in May and July.

• 인간식물환경학회지
• /
• 제24권6호
• /
• pp.609-617
• /
• 2021

Background and objective: The nanobubbles remain stable in water, and it increased dissolved oxygen (DO) in the water that promotes the seed germination and the plant growth. We evaluated the seed germination and growth of sprouts (radish, wheat, and barley) and leafy vegetables (red mustard and pak choi) when irrigated with various DO of nanobubble water (NB). Methods: The oxygen NB was generated by surface friction and treated in 4 levels: NB 0% (control, DO 9.21 mg·L^-1), NB 20% (DO 15.40 mg·L^-1), NB 33% (DO 20.93 mg·L^-1), and NB 100% (DO 39.29 mg·L^-1). Results: The root length of radish and wheat increased more in NB 33% than the control plot. The fresh weight increased in NB 33% compared to the control plot in radish and wheat, and both fresh and dry weight increased more in NB 20%, NB 33%, and NB 100% than the control plot of barley. The leaf length and width of red mustard decreased more in NB 33% and NB 100% than the control plot and NB 20%, which indicated the leaf compactness. The fresh and dry weight of shoot and root increased more in NB 100% than the control plot in red mustard. In pak choi, the shoot fresh weight increased more in NB 100% than the control plot. In leafy vegetables, the germination rate of red mustard in NB 100% was higher than the control plot, however, it was not significantly different between oxygen NB plots in sprout vegetables. Conclusion: The results showed that the root growth and biomass increased after applying NB 33% in sprout vegetables. The leaf growth properties as the number of leaves and leaf size were not significantly different or decreased in NB treatments compared to control plots, but NB 100% (DO 39.29 mg·L^-1) effectively increased the root growth and plant biomass in leafy vegetables.

• Journal of Advanced Marine Engineering and Technology
• /
• 제29권4호
• /
• pp.453-460
• /
• 2005

Experiments were conducted to investigate the effect of the surface roughness on the flat plate turbulent boundary layer. The square rods were installed at the leading edge to make surface roughness. The particle image velocimetry was used to measure the mean velocities and velocity fluctuation component. All measurements were made over a range of w/k=1. 2 5 and $Re_x=80.000{\sim}360,000$. Friction velocity was measured by using Clauser plot method. The level of turbulent intensities on roughness surface appears more strongly than that of turbulent intensities on flat plate. A correlation of boundary layer thickness in term of $Re_x$ and w/k are presented.

• 한국산림과학회지
• /
• 제31권1호
• /
• pp.43-47
• /
• 1976

본시험(本試驗)은 저사저수구(貯砂貯水溝)의 유토저지효과(流土沮止効果)를 구명(究明)키 위하여 실시(實施)되었다. 10개(個)의 저사저수구(貯砂貯水溝)가 $50m^2$크기의 시험구내(試驗區內)에 등고선(等高線) 방향(方向)으로 설치(設置)되었다. 저사저수구(貯砂貯水溝)의 크기는 2종류(種類)로서 하나는 폭(幅)$30cm{\times}$장(長)$100cm{\times}$심(深)30cm이고 다른 것은 폭(幅$30cm{\times}$장(長)$100cm{\times}$심(深)20cm였다. 1. 저사저수구(貯砂貯水溝)는 유토저지효과(流土沮止効果)가 매우 높아서 대조구(對照區)는 저사저수구설치구(貯砂貯水溝設置區)보다 2.3~2.6배(倍)의 높은 유토량(流土量)을 나타내었다. 2. 30cm깊이 저사저수구(貯砂貯水溝)와 20cm깊이 저사저수구간(貯砂貯水溝間)에는 차이(差異)가 없었다. 3. 저사저수구(貯砂貯水溝)는 식생(植生)의 피복도(被覆度), 생립본수(生立本數) 및 생장(生長)에는 아무런 영향(影響)을 주지 못했다. 4. 경사여지(傾斜餘地)가 중경사지(中傾斜地)와 완경사지(緩傾斜地)에 비(比)해 식생(植生)의 피복도(被覆度), 생장(生長) 및 생장량(生長量)에 있어서 저조(低調)한 결과(結果)를 보여 주었다.

• Geomechanics and Engineering
• /
• 제11권4호
• /
• pp.515-530
• /
• 2016

In this paper, five different quantitative parameters were proposed for the characterization of the primary roughness which is the component of surface morphology that prevails during large strike-slip faults of more than 50 m. These parameters are mostly the anisotropic properties of rock surface morphology at various scales: (i) coefficient ($k_a$) and degree (${\delta}_a$) of apparent structural anisotropy of surface; (ii) coefficient ($k_r$) and degree (${\delta}_r$) of real structural anisotropy of surface; (iii) surface anisotropy function P(${\varphi}$); and (iv) degree of surface waviness ($W_s$). The coefficient and degree of apparent structural anisotropy allow qualifying the anisotropy/isotropy of a discontinuity according to a classification into four classes: anisotropic, moderately anisotropic/isotropic and isotropic. The coefficient and degree of real structural anisotropy of surface captures directly the actual surface anisotropy using geostatistical method. The anisotropy function predicts directional geometric properties of a surface of discontinuity from measurements in two orthogonal directions. These predicted data may subsequently be used to highlight the anisotropy/isotropy of the surface (radar plot). The degree of surface waviness allows qualifying the undulation of anisotropic surfaces. The proposed quantitative parameters allows their application at both lab and field scales.

• 접착 및 계면
• /
• 제2권3호
• /
• pp.9-15
• /
• 2001

표면 에너지가 낮아 접착이 어려운 EVA foam을 용해도 파라미터와 표면장력이 다른 용매로 표면처리하여 표면의 상태 변화를 SEM, 접촉각 측정 등으로 조사하였으며 표면의 변화가 접착력에 미치는 영향을 고찰하였다. Zismann plot에 의해 계산된 EVA foam의 임계표면장력 (${\gamma}_{c,0}$)은 27.08 dyne/cm이었다. 용매 처리에 의해 EVA foam 표면의 형태 및 임계포면장력이 변화하였으며 EVA foam의 팽윤도가 용해도 파라미터에 의해 영향을 받는 것에 비해 표면의 변화 정도는 용매의 표면장력에 더 크게 의존하였다. 표면의 변화는 용매의 표면장력 (${\gamma}_L$)이 EVA foam의 임계표면장력 보다 낮아 wetting이 잘될수록 커지는 것으로 나타났다. 용매 처리된 EVA foam을 접착한 결과 처리하지 않은 것에 비해 접착력이 600% 이상 크게 향상되었으며, ${\gamma}_c$가 프라이머의 ${\gamma}_{L,p}$에 근접하여 ${\gamma}_c/{\gamma}_{L,p}$가 1에 가까워질수록 접착력이 증가하였다.

• 한국환경과학회지
• /
• 제3권4호
• /
• pp.403-408
• /
• 1994

Catalytic slurry reactors, in which a solid maintained in the rom of fine particles suspended in a liquid, are frequently used in chemical and biochemical and industries. In these processes the particle loading is normally low so that the effects of particles on the liquid-film mass transfer coefacent and the gas-liquid interface area are assumed to be negligible. But it is known from the works, amongst others, that the finely powdered activated carbon can increase the gas-liquid mass transfer significantly in surface-aerated reactors. The stirred cell (13.2cm inside diameter) contained four baffles and at the stirring speeds range of 80 ∼ 300ppm, the gas-liquid interfacial area could be considered as that of the cross section of the vessel (that is, 130.1cm2). When the stirrer speeds were increased, the effective interfacial area was slightly higher than the geometric area and was obtained experimentally from the Danckwerts plots. Key Words : gas-liquid interfacial area, Duckwert's Plot stirred dell. mass transfer coefficient.