• 한국재료학회지
• /
• 제13권3호
• /
• pp.180-184
• /
• 2003

Ce-doped $Y_2$SiO$_{5}$ phosphor particles of spherical morphology, fine size, high crystallinity and high photoluminescence (PL) intensity were prepared by spray pyrolysis. When nitrate precursor solution is adopted, hollow particles were formed by uneven drying rate between surface and inside of droplet. Citric acid and ethylene glycol were introduced as polymeric precursor to control the morphology of particles. When polymeric solution is adopted, polymeric chain is formed by the esterification reaction between carboxyl and hydroxy groups of citric acid and ethylene glycol, and considered as controlling the drying characteristics of droplet. $Y_2$$SiO_{5}$ :Ce phosphor particles prepared from polymeric precursor solution were spherical, filled, fine size and not agglomerate before and after post heat treatment. The optimum doping concentration of cerium was 0.5 mol% of overall solution concentration. The optimum amount of TBOS of high PL intensity and pure crystallinity of X2-type $Y_2$$SiO _{5}$ was 105% of stoichiometric amount. The PL intensity of $Y_2$X$/_{5}$ :Ce phosphor particles prepared using the polymeric precursor solution was 164% of that of the nitrate precursor solution due to homogeneous composition and good morphology.y.

• 한국세라믹학회지
• /
• 제49권5호
• /
• pp.432-437
• /
• 2012

Electrical properties of the laminated SMD-type PTC thermistor for microcircuit protection were investigated as a function of calcination and sintering temperature. $BaTiO_3$ with $Y_2O_3$ and $MnO_2$ were calcined at 1000 to $1150^{\circ}C$ for 2h and the laminated SMD-type PTC thermistor was sintered at 1350 to $1400^{\circ}C$ for 2h in a reduced atmosphere (1% $H_2/N_2$). Sintered density of the sample was dependent on the calcination and sintering temperature. Electrical properties of the sintered samples were strongly dependent on the densities of samples. For the samples with density below 4.6 g/$cm^3$, the insulator characteristics were observed, while PTC jump characteristics (R150/R30) were disappeared for the sample with density above 5.05 g/$m^3$. Optimal PTC characteristics were obtained for the sintered samples with density of 5.05 g/$m^3$. The laminated SMD-type PTC thermistor prepared by calcination at $1100^{\circ}C$ for 2h and sintering at $1270^{\circ}C$ for 2h showed the room temperature resistivity of $11{\Omega}{\cdot}cm$ and PTC jump characteristics of $10^2$ order.

• 한국분말재료학회지
• /
• 제25권3호
• /
• pp.246-250
• /
• 2018

In this study, we investigate the deformation behavior of $Hf_{44.5}Cu_{27}Ni_{13.5}Nb_5Al_{10}$ metallic glass powder under repeated compressive strain during mechanical milling. High-density (11.0 g/cc) Hf-based metallic glass powders are prepared using a gas atomization process. The relationship between the mechanical alloying time and microstructural change under phase transformation is evaluated for crystallization of the amorphous phase. Planetary mechanical milling is performed for 0, 40, or 90 h at 100 rpm. The amorphous structure of the Hf-based metallic glass powders during mechanical milling is analyzed using differential scanning calorimetry (DSC) and X-ray diffraction (XRD). Microstructural analysis of the Hf-based metallic glass powder deformed using mechanical milling reveals a layered structure with vein patterns at the fracture surface, which is observed in the fracture of bulk metallic glasses. We also study the crystallization behavior and the phase and microstructure transformations under isothermal heat treatment of the Hf-based metallic glass.

• Bulletin of the Korean Chemical Society
• /
• 제25권7호
• /
• pp.1051-1054
• /
• 2004

The structural transformation behavior of $Na_2Ti_3O_7$ by hydrolysis was investigated in mild and strong acidic aqueous medium. Compared with $K_2Ti_4O_9,\;Na_2Ti_3O_7$ exhibits quite different structural and morphological transformation behavior despite their similar layered structural characteristics. $TiO_2(B)$ obtained by heat treatment of $H_2Ti_3O_7\;at\;350^{\circ}C$ transforms to rutile $H_2Ti_3O_7\;at\;900^{\circ}C$. This temperature is much lower than $1200{\circ}C$, the temperature for anatase to rutile transition when $K_2Ti_4O_9$ is used as a starting titanate. A rectangular rod shape and size of $TiO_2(B)$ particles obtained from $Na_2Ti_3O_7$ is also different from a fibrous structure of $TiO_2(B)$ prepared using $K_2Ti_4O_9$. Rutile crystals of 100 nm diameter with a corn-like morphology and large surface area are directly obtained when the hydrolysis of $Na_2Ti_3O_7$ is carried out at $100^{\circ}C$ in a strong acid solution. The structure of starting titanates and the hydrolysis conditions are an important factor to decide the particle size and morphology of $TiO_2(B)\;and\;TiO_2$.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 춘계학술대회 논문집 센서 박막재료 반도체재료 기술교육
• /
• pp.55-61
• /
• 2002

Ultra-fine particles of $SnO_{2}$ was synthersized by the sol-gel powder processing using tin(II) chloride dihydrate$(SnCl_{2}{\cdot}2H_{2}O)$ and ethanol$(C_{2}H_{5}OH)$ as raw materials. Gel powders can be obtained by drying of sol at $120^{\circ}C$ after aging 72hrs and 168hrs. The amount of $SnO_{2}$ phase was increased with temperature because of the evaporation of volatile components, and the creation of $SnO_{2}$ phase was almost done by the heat treatment at $700^{\circ}C/30min$ The grain sizes after firing are about 20-30nm, and it showed the narrow distribution of grain size. The specimens to measure electrical properties were fabricated by the thick film screen printing technique on the alumina substrates. The conductance of $SnO_{2}$ was increased with temperature up to $380^{\circ}C$ by the typical conduction mechanism of semiconducting ceramics. There was a region of constant conductance between about $200^{\circ}C$ and $380^{\circ}C$ due to the increment of electron concentration with temperature and the annihilation of conduction carriers by the absorption and electron trapped-ionization of oxygen on the surface of $SnO_{2}$, It was finally showed the intrinsic behaviors above $450^{\circ}C$. The sensing properties of response time, recovery, and sensitivity of CO were improved with aging time.

• 한국공작기계학회논문집
• /
• 제14권2호
• /
• pp.33-41
• /
• 2005

ZnO epilayer was synthesized by the pulsed laser deposition(PLD) process on Al$_2$O$_3$ subsorte after irradiating the surface of ZnO sintered pellet by ArF(193nm) excimer laser. The epilayers of ZnO were achieved on sapphire(A1203) substrate at the 境mperature of 400$^{circ}$C. The crystalline structure of epilayer was investigated by the Photoluminescence and double crystal X-ray diffraction(DCXD). The carrier density and mobility of ZnO epilayer measure with Hall effect by van der Pauw mothod are $8.27\times$1016cm$^{-3}$ and 299 cm$^{2}$/V$\cdot$s at 293 K respectively, The temperature dependence of the energy band gap of the ZnO obtained from the absorption spectra was well described by the Varshni's relation, E$_g$(T)= 3.3973 eV - ($2.69\times$ 10$^{-4}$ eV/K)T$^{2}$/(T + 463K). After the as-grown ZnO epilayer was annealed in Zn atmospheres, oxygen and vaccum the origin of point defects of ZnO atmospheres has been investigated by the photoluminescence(PL) at 10K. The native defects of V$_{Zn}$, V$_{O}$, Zn$_{int}$, and O$_{int}$ obtained by PL measurements were classified as a donor or acceptor type. In addition we concluded that the heat-treatment in the oxygen atmosphere converted ZnO thin films to an optical p-type. Also, we confirmed that vacuum in ZnO/Al$_2$O$_3$ did not firm the native defects because vacuum in ZnO thin films existed in the form of stable bonds.

• 대한기계학회논문집
• /
• 제16권1호
• /
• pp.53-62
• /
• 1992

본 연구에서는 약 10년 정도 사용하여 경년 열화가 되었다고 예상되는 실구조 물의 일부를 입수하였으며 열화재의 특성과 비교하기 위하여 열처리에 의해 충격치를 회복시킨 재료를 회복재로 하여 두가지 재료에 대해 시험편을 제작하였따.열확현상 을 파악하기 위하여 평활재로 피로과정, 즉 미소 균열의 발생, 진전 및 복수 균열이 간섭합체하여 파단에 달하는 과정에 대하여 파괴역학적 견지에서 열화재와 회복재를 해석하고 이결과로 부터 확율변수를 추정하여 통계학적인 수명예측방법의 하나를 제시 하여 실구조물에 적용하는 방법에 대해 시도해 보았다.

• 한국수정란이식학회지
• /
• 제26권1호
• /
• pp.53-56
• /
• 2011

Infertility of the pig is directly affects on economic loss and failure of the embryo transfer. In the present case report, we show one rare case of porcine infertility resulted from oviductal obstruction. A gilt showing normal heat behaviors was selected as a recipient of embryo transfer. During the laparotomy surgery, abnormality of the reproductive tract was founded. Several large sized cyst-like structures were founded on infundibulum and body of uterus. Severe enlargement of oviduct represents that obstruction of the oviduct. Sign of fibrosis on the surface of uterus and other internal organs revealed that the obstruction was come arise from prior peritonitis. Mild neutropenia and elevated number of monocytes, eosinophils and platelets in blood smear represent that the peritonitis might be due to chronic parasitic infection. Ovarian function was seems to be normal due to blood progesterone concentration was higher than basal level. The pig was culled because she cannot be recovered by surgical or hormonal treatment.

• Tribology and Lubricants
• /
• 제33권3호
• /
• pp.106-111
• /
• 2017

Sapphire is an anisotropic material with excellent physical and chemical properties and is used as a substrate material in various fields such as LED (light emitting diode), power semiconductor, superconductor, sensor, and optical devices. Sapphire is processed into the final substrate through multi-wire saw, double-side lapping, heat treatment, diamond mechanical polishing, and chemical mechanical polishing. Among these, chemical mechanical polishing is the key process that determines the final surface quality of the substrate. Recent studies have reported that the material removal characteristics during chemical mechanical polishing changes according to the crystal orientations, however, detailed analysis of this phenomenon has not reported. In this work, we carried out chemical mechanical polishing of C(0001), R($1{\bar{1}}02$), and A($11{\bar{2}}0$) substrates with different sapphire crystal planes, and analyzed the effect of crystal orientation on the material removal characteristics and their correlations. We measured the material removal rate and frictional force to determine the material removal phenomenon, and performed nano-indentation to evaluate the material characteristics before and after the reaction. Our findings show that the material removal rate and frictional force depend on the crystal orientation, and the chemical reaction between the sapphire substrate and the slurry accelerates the material removal rate during chemical mechanical polishing.

• 한국세라믹학회지
• /
• 제38권3호
• /
• pp.287-292
• /
• 2001

본 실험은 목적은 CRT(Cathode Ray Tube)용 청색 형광체인 ZnS:Ag 분말 표면에 액상법으로 SnO$_2$를 균일하게 코팅하는 공정조건을 연구하는 것이다. 용매로서 물을 사용하고, Sn의 공급물질로서 SnCl$_4$.4$H_2O$, 침전 촉매로서 CO(NH$_2$)$_2$를 각각 사용하여, 균일 침전 방법으로 ZnS:Ag 분말표면에 SnO$_2$를 코팅할 수 있었다. 초기에 첨가되는 SnCl$_4$.4$H_2O$의 량이 Sn/Zn의 몰비기준으로 0.017인 경우에 ZnS:Ag 분말표면에 Sn(OH)$_4$가 균일하게 코팅되지만, 그 이상 첨가되면 과량의 Sn(OH)$_4$가 입자들 사이에 응집되었다. 코팅된 Sn(OH)$_4$는 비정질 구조로 규명되었으며, 이를 SnO$_2$결정상으로 전이시키기 위하여 300~$700^{\circ}C$ 범위 내에서 열처리를 행하였다. 비정질 Sn(OH)$_4$는 20$0^{\circ}C$이하에서 탈수되었고 45$0^{\circ}C$부터 SnO$_2$로 결정화되기 시작하였다. 순수한 ZnS의 경우, 50$0^{\circ}C$이하에서는 상변화가 없으나, $600^{\circ}C$에서 일부 산화되었으며 $700^{\circ}C$에서는 완전히 ZnO로 산화되므로, ZnS의 산화방지 및 SnO$_2$의 결정화를 동시에 만족하는 최고 열처리온도는 50$0^{\circ}C$로 규명되었다. 그러나 ZnS에 SnO$_2$가 코팅된 시편의 경우에는 $600^{\circ}C$가 되어도 ZnS 상이 거의 산화되지 않았고, $700^{\circ}C$에서도 ZnS와 ZnO 상이 공존한 것으로 보아 SnO$_2$코팅이 ZnS의 산화를 억제하는 것으로 나타났다.