The PTCR Characteristics of the Laminated SMD-Type PTC Thermistor as a Function of the Heat Treatment Conditions |
Lee, Mi-Jai
(Electronic Materials Laboratory, Korea Institute of Ceramic Engineering)
Jang, Jae-Woon (Electronic Materials Laboratory, Korea Institute of Ceramic Engineering) Lim, Tae-Young (Electronic Materials Laboratory, Korea Institute of Ceramic Engineering) Park, Seong-Chul (Annexed Research Institute, InnoChips Technology) Song, Jun-Baek (Annexed Research Institute, InnoChips Technology) Han, Cheong-Hwa (Department of Advanced Materials & Chemical Engineering, Halla University) |
1 | J. G. Kim, W. S. Cho, and K. Park, "PTCR Characteristics in Porous (Ba,Sr) Ceramics Produced by Adding Partially Oxidized Ti Powders," Mater. Sci. Eng., B 77 255-60 (2000). DOI |
2 | V. Shut, S. Kostomarov, and A. Gavrilov, "PTCR Barium Titanate Ceramics Obtained from Oxalate-derived Powders with Varying Crystallinity," J. Mater. Sci., 43 52517-57 (2008). |
3 | M. Kuwabara, "Influence of Stoichiometry on the PTCR Effect in Semiconducting Barium Titanate Ceramics," J. Am. Ceram. Soc., 64 C170-71 (1981). |
4 | H. M. Al-Allak, G. J. Russel, and J. Woods, "The Effect of Annealing on the Characteristics of Semiconducting Positive Temperature Coefficient of Resistance Devices," J. Phys. D:Appl. Phys., 20 [12] 1645-51 (1987) DOI |
5 | H. J. Kwon, J. S. Lee, Y. S. Lee, D. K. Lee, and Y. H. Lee, "The Electrical Charateristics of the Grain Boundary in a PTC Thermistor," J. Sens. Sci. & Tech., 1 [1] 67-75 (1992). |
6 | I. C. Ho and S. L. Fu, "Effect of Reoxidation on the Grain- Boundary Acceptor-State Density of Reduced Ceramics," J. Am. Ceram. Soc., 75 [3] 728-30 (1992). DOI |
7 | S. K. Jo and Y. H. Han, "Effects of Reoxidation Process on Positive Temperature Coefficient of Resistance Properties of Sm-doped ," Jpn. J. Appl. Phys., 46 [3A] 1076-80 (2007). DOI |
8 | J. G. Kim and J. G. Ha, "Preparation of Porous -based ceramics by High Energy Ball-milling Process," Mater. Lett., 60 1505-508 (2006). DOI |
9 | C. K. Liang and C. C. Tsai, "Evaluation of a Novel PTC Thermistor for Telecom Overcurrent Protection," Sens. Act. A, 121 443-49 (2005). DOI |
10 | M. J. Lee, B. N. Kim, J. H. Hwang, J. H. Kim, S. C. Park, and J. B. Song, "The Electrical Properties of the Laminated PTC Thermistor for Micro Circuit Protection as a Function of Starting Material and Sr addition," J. Kor. Ceram. Soc., 48 [6] 525-30 (2011). 과학기술학회마을 DOI |
11 | Y. K. Chung and S. C. Choi, "Effects of the Re-oxidation Temperature and Time on the PTC Properties of Sm-doped ," J. Kor. Ceram. Soc., 46 [3] 330-35 (2009). 과학기술학회마을 DOI |
12 | J. Qi, W. Chen, H. Wang, Y. Wang, L. Li, H. Lai, and W. Chan, "Low Temperature Sintering Behavior of Vapor in -based PTCR Thermistors," Sens. Act. A. 116 215- 18 (2004). DOI |
13 | G. Desgardin, P. Bajolet, and B. Raveau, "Barium Titanate Perovskite Sintered with Lithium Fluoride," J. Am. Ceram. Soc., 66 [11] 801-7 (1983). DOI |
14 | D. A. Tolino and J. B. Blum, "Effect of Ba:Ti Ratio on Densification of LiF-Fluxed ," J. Am. Ceram. Soc., 68 [11] 292-94 (1985). |
15 | M. Valant, D. Suvorov, R. C. Pullar, K. Sarama, and N. M. Alford, "A Mechanism for Low-temperature Sintering," J. Eur. Ceram. Soc., 26 2777-83 (2006). DOI |