• E2M - 전기 전자와 첨단 소재
• /
• 제9권5호
• /
• pp.450-454
• /
• 1996

Maxwell-Displacement-Current(MDC) measuring technique has been applied to the study of monolayers of Dilauroylphosphatidylcholine (L-.alpha.-DLPC) and Dimyristoylphosphatidylcholine (L-.alpha.-DMPC). The displacement current was generated from monolayers on a water surface by monolayer compression. Displacement current was generated when the area per molecule was about 250.angs.$^{2}$, 280.angs.$^{2}$. Displacement current was generated in the gas state, gas/liquid state, and liquid state in the course of monolayer compression. The orientational change of molecules in monolayers was discussed on the basis of the MDCs obtained. Finally, we measured differential thermal analysis of sample.

• 대한전자공학회논문지
• /
• 제26권8호
• /
• pp.1282-1289
• /
• 1989

Dual field speckle interferometry that is sensitive to the surface displacement of the object is constructed, and fringe patterns that have the displacement-informations are analysed using digital image processing. From 10\ulcorner to 80\ulcorner with respect to each specklegrams are obtained by double-exposure techniques, which are analysed by the proposed system and algorithm. Up to 10\ulcorner displacement, near measurable lower bound of Speckle Interferometry, fringe visibility is decreased due to decreasing fringe density, therefore relative errors are produced over 10% but over that displacement, relative errors are produced below 5%. Particularly, it is observed that spatial frequencies of each displacement are comparatively linear.

• 한국지반공학회논문집
• /
• 제36권11호
• /
• pp.51-60
• /
• 2020

횡방향의 토압에 저항하는 앵커블록, 흙막이 가설벽체, 레이커 지지블록 등에서 수동토압 산정은 중요한 요소이다. 실무에서는 사용의 편의성으로 인하여 파괴면을 직선으로 가정한 Coulomb과 Rankine의 이론을 사용하여 토압을 산정하는 것이 일반적이다. 하지만 실제 발생하는 수동파괴면은 벽면과 지반의 마찰로 인하여 벽체부근에서는 곡면이고 지표부근에서는 평면이 되는 복합파괴면을 형성한다. 흙막이 구조물의 안정검토에서 저항력으로 산정되는 수동토압이 발생되는 변위는 주동토압이 발생되는 주동변위 보다 커 대부분 구조물의 안정성을 초과하는 변위가 발생하여야 수동토압의 저항력이 발휘되므로 수동토압을 설계에 적용하기 위해서는 허용변위 이내의 임의변위에서 발휘되는 수동측토압의 산정이 매우 중요한 요소이다. 본 연구에서는 복합파괴면을 반영한 한계변위 내의 임의 변위에서 발휘되는 수동측토압을 산정할 수 있는 반경험식을 활용하여 벽체의 세 가지 거동조건에 따라 임의 변위에서 발휘되는 수동토압을 분석하였다.

• 한국응용과학기술학회지
• /
• 제26권3호
• /
• pp.279-287
• /
• 2009

Fisher-Tropsch synthesis for the production of hydrocarbon from syngas was investigated on 20% cobalt-based catalysts (20% Co/HSA, 20% Co/Si-MMS), which were prepared by home-made supports with high surface areas such as high surface alumina (HSA) and silica mesopores molecular sieve (Si-MMS). In the gas phase reaction by syngas only, 20% Co/Si-MMS catalyst was shown in higher CO conversion and lower carbon dioxide formation than 20% Co/HSA, whereas the olefin selectivity was higher in 20% Co/HSA than in 20% Co/Si-MMS. In the effect of n-hexane added in syngas, the selectivities of $C_{5+}$ and olefin were increased by comparing the supercritical phase reaction with the gas phase reaction in addition to reduce unexpected methane and carbon dioxide.

• 한국압력기기공학회 논문집
• /
• 제8권3호
• /
• pp.13-22
• /
• 2012

According to recent research on leak-rate estimates to assess rupture probabilities of nuclear piping which contains a circumferential surface/through-wall cracks due to PWSCC, i.e., xLPR (Extremely Low Probability of Rupture) program, it has been revealed that the use of crack shape with an idealized circumferential through-wall crack during actual crack growth can lead to overestimate of the leak-rate. Thus, for accurate estimation of the leak-rate during crack growth, the more realistic crack shape that can simulate the crack shape transition from surface crack to through-wall crack should be used. In this context, in the present study, the elastic crack opening displacement of slanted circumferential through-wall crack in thick-walled cylinder was proposed based on 3-dimensional elastic finite element fracture mechanics analyses. To propose the elastic crack opening displacement of slanted circumferential through-wall crack in thick-walled cylinder, the geometric variables affecting crack opening displacement, i.e., thickness of cylinder, reference inner crack length and slant crack ratio were systematically varied. In terms of loading conditions, axial tension, global bending moment and internal pressure were considered. The present results can be applied to calculate the leak-rate considering more realistic crack shape transition from surface crack to idealized through-wall crack, and can be expected to enhance current leak-rate estimation scheme, for instance, in xLPR program etc.

• 지구물리와물리탐사
• /
• 제6권2호
• /
• pp.77-86
• /
• 2003

자유면 경계조건을 정착하게 묘사할 수 있는 변위근사 유한차분법을 이용하는 시간영역 탄성파 모델링법을 고안하였다. 기존의 변위근사 유한차분법의 경우 변위와 매질의 물성을 격자점에 정의하는 격자군(격자점 기반의 격자군)을 이용하였으나, 이 연구에서 제시하는 새로운 유한차분법에서는 변위는 격자점에 정의하지만 매질의 물성을 격자점으로 둘러싸인 면에 정의하는 격자군(셀 기반의 격자군)을 이용한다. 매질의 물성을 셀에 정의할 경우 자유면에서 응력이 사라진다는 자유면 경계조건을 추가로 적용할 필요가 없으며 매질의 물성 변화만으로 자유면 경계조건을 표현할 수 있다. 수치예를 통한 정확도 분석 결과 셀 기반의 격자군을 이용할 경우 계산된 수치석인 해가 해석적인 해에 매우 근사함을 알 수 있었다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 추계학술대회
• /
• pp.214-219
• /
• 2004

Crack tip behavior of single mode loading condition(mode I)depend on tensile loading component but one of mixed mode loading condition(mode I+II) have influenced on shear loading component like the practical structure. Because crack closure is caused by shear loading component under mixed-mode loading a research on the behavior in the stage of crack initiation and propagation require to be evaluate about crack closure effect by fatigue crack surface friction. For that reasion we examined the behavior at the crack tip by direct measuring method. Measured behavior at the crack tip was analyzed through vector crack tip displacement. As a result, crack propafation equation was corrected by considering with crack closure effect. In addition we compared fatigue fracture crack surface and crack closure level.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제8권2호
• /
• pp.153-168
• /
• 2016

Sloshing phenomenon is a complicated free surface flow problem that increases the dynamic pressure on the sidewalls and the bottom of the storage tanks. When the storage tanks are partially filled, it is essential to be able to evaluate the fluid dynamic loads on the tank's perimeter. In this paper, a numerical code was developed to determine the pressure distribution on the rectangular and trapezoidal storage tanks' perimeters due to liquid sloshing phenomenon. Assuming the fluid to be inviscid, the Laplace equation and the nonlinear free surface boundary conditions were solved using coupled boundary element - finite element method. The code performance for sloshing modeling was validated using Nakayama and Washizu's results. Finally, this code was used for partially filled rectangular and trapezoidal storage tanks and free surface displacement, pressure distribution and horizontal and vertical forces exerted on the tanks' perimeters due to liquid sloshing phenomenon were estimated and discussed.

• Geomechanics and Engineering
• /
• 제15권4호
• /
• pp.937-945
• /
• 2018

A probabilistic study of a reinforced earth wall in a frictional soil using the surface response methodology (RSM) is presented. A deterministic model based on numerical simulations is used (Abdelouhab et al. 2011, 2012b) and the serviceability limit state (SLS) is considered in the analysis. The model computes the maximum horizontal displacement of the wall. The response surface methodology is utilized for the assessment of the Hasofer-Lind reliability index and is optimized by the use of a genetic algorithm. The soil friction angle and the unit weight are considered as random variables while studying the SLS. The assumption of non-normal distribution for the random variables has an important effect on the reliability index for the practical range of values of the wall horizontal displacement.

• KSTLE International Journal
• /
• 제1권1호
• /
• pp.48-51
• /
• 2000

Surface damage accumulation of alumina ceramics under the cyclic stress state was analyzed. The alternating stress state in repeat pass sliding contact was simulated by a synchronized biaxial (normal and tangential) repeated indentation technique. Wear debris formation mechanism through damage accumulation and fatigue grain failure in both alumina ceramic balls and flat disks was confirmed, and the contact induced surface degradation due to fatigue cracking accumulation was quantified by measuring vertical contact displacement. Variation of structural compliance (slope of load-displacement curve) of two contacting bodies was expressed as a variation of the apparent elastic property, called pseudo-elastic constant, of the contact system.