• 제목/요약/키워드: surface debris

검색결과 292건 처리시간 0.023초

Glacier Change in the Yigong Zangbo Basin, Tibetan Plateau, China

  • Ke, Chang-Qing;Lee, Hoonyol;Han, Yan-Fei
    • 대한원격탐사학회지
    • /
    • 제35권4호
    • /
    • pp.491-502
    • /
    • 2019
  • Distinguishing debris-covered glaciers from debris-free glaciers is difficult when using only optical remote sensing images to extract glacier boundaries.According to the features that the surface temperature of debris-covered glacier is lower than surrounding objects, and higher than clean glaciers, glacial changes in the Yigong Zangbo basin was analyzed on the basis of visible, near-infrared and thermal-infrared band images of Landsat TM and OLI/TIRS in the support of ancillary digital elevation model (DEM). The results indicated that glacier area gradually declined from $928.76km^2$ in 1990 to $918.46km^2$ in 2000 and $901.51km^2$ in 2015. However, debris-covered glacier area showed a slight increase from $63.39km^2$ in 1990 to $66.24km^2$ in 2000 and $71.16km^2$ in 2015. During 25 years, the glacier length became shorter continuously with terminus elevation rising up. The area of moraine lakes in 1990 was $1.43km^2$, which increased to $1.98km^2$ in 2000 and $3.41km^2$ in 2015. In other words, the total area of the moraine lakes in 2015 is 2.38 times of that in 1990. This increase in moraine lake area could be the result of accelerated glacier melt and retreat, which is consistent with the significant warming trend in recent decades in the basin.

FLO-2D 모형을 이용한 우면산 토석류 유동 수치모의 (Run-out Modeling of Debris Flows in Mt. Umyeon using FLO-2D)

  • 김승은;백중철;김경석
    • 대한토목학회논문집
    • /
    • 제33권3호
    • /
    • pp.965-974
    • /
    • 2013
  • 2011년 7월 27일 우면산 유역에서 일련의 토석류가 발생하여 많은 인명과 재산 피해를 야기했다. 이러한 토석류 피해를 저감하기 위해서는 토석류가 어떻게 이동하고 퇴적되어 하류부에 피해를 주는지를 예측할 수 있는 기술이 필요하다. 이 연구에서는 우면산 토석류에 대해서 FLO-2D 수치모형을 적용하여, 모형의 성능을 평가하고, 이들 토석류의 유동 매개변수를 분석하였다. 우면산 북측사면에서 발생한 토석류의 현장 관측자료와 FLO-2D 모의 결과 분석을 통해서 역산된 우면산 토석류의 대표 항복응력은 1,022 Pa 그리고 대표 동점성은 652 $Pa{\cdot}s$ 인 것으로 나타났다. 선정된 매개변수를 이용하여 우면산 토석류의 퇴적영역을 산정한 결과, 래미안 유역의 경우 63 - 85% 정확도의 피해유역을 재현됨으로서 FLO-2D 모형은 피해유역 산정에 적합한 것으로 나타났다. 하지만, FLO-2D 모형이 침식물질과 우수의 연행작용을 고려할 수 없는 고유의 한계 때문에 연행작용이 현저한 래미안 및 신동아 유역 토석류의 유하속도는 과소평가하는 것으로 나타났다. 유하부에서 침식에 의한 연행작용이 활발하지 않은 형촌마을 유역 토석류는 수로와 저수지 상부 부근에서의 퇴적을 우수한 정확도로 모의되었다. 민감도 분석 결과 유사체적농도와 바닥조도계수 모두 토석류의 흐름두께와 유속 모두에 상당한 영향을 미치는 것으로 나났으므로, 이들 매개변수의 선정에 신중해야 함을 보여주었다.

수도권지역(首都圈地域) 산지암반사면(山地岩盤斜面)의 황폐특성(荒廢特性)에 관한 기초적(基礎的) 연구(硏究) (Denudation Characteristics of the Rockily Eroded Mountains in Seoul Metropolitan Area)

  • 우보명
    • 한국산림과학회지
    • /
    • 제76권1호
    • /
    • pp.17-26
    • /
    • 1987
  • 서울 수도권(首都圈) 지역(地域)에 널리 분포되어 있는 암반황폐지(岩盤荒廢地)에 대한 황폐특성(荒廢特性)을 규명하여 회복대책(恢復對策)을 강구하기 위한 기초적 연구로서 황폐유형(荒發類型)을 분류(分類)하고, 또 암반사면(岩盤斜面)에서의 암설토사(巖屑土砂)의 활강이동퇴적량(滑降移動堆積量)을 측정(測定)하였다. 황폐지(荒廢地)의 기본유형(基本類型)을 자연암벽(自然岩壁) 및 암반라출지(岩盤裸出地), 암설산재지(岩屑散在地), 암설(岩屑) 및 조사(粗砂)의 퇴적지(堆積地), 풍화(風化)에 민감한 거친 모래생산지(生産地), 외성(矮性)소나무산생지(散生地) 및 계간황폐지(溪間荒發地)로 6대(大) 분류(分類)할 수 있었다. 그리고 암설산재사면(巖屑散在斜面)에서 년평균(年平均) 암설토사(岩屑土砂)의 활강이동량(滑降移動量)은 약 3.9 ton/ha/yr으로 계산되었다. 활강이동(滑降移動)된 암설토사(岩屑土砂)의의 입경분포(粒徑分布)에 있어서는 평균입경(平均粒徑) 약 10~25mm 급(級)에서 약 25%, 5~10 mm 급(級)에서 약 15%, 2~5 mm 급(級)에서 약 24%, 그리고 2mm 이하에서 약 36%로 분석(分析)되었다. 암석사면(岩石斜面)에서의 풍화(風化)-침식(浸蝕)-이동(移動)-황폐과정(荒廢過程)에 대한 실험적(實驗的) 연구(硏究)가 수행되어야 할 것이다.

  • PDF

플라즈마 질탄화 & 후산화처리로 S45C강에 형성된 산화막의 마찰거동 (Frictional behaviour of Oxide Films Produced on S45C Steel by Plasma Nitrocarburizing and Post Plasma Oxidation Treatment)

  • 정광호;이인섭
    • 한국재료학회지
    • /
    • 제16권12호
    • /
    • pp.766-770
    • /
    • 2006
  • The frictional behavior of oxide films on top of the plasma nitrocarburized compound layers was investigated in terms of post-oxidation treatment temperatures. The post-oxidation treatment at both temperatures($400^{\circ}C,\;500^{\circ}C$) produced magnetite($Fe_3O_4$) films which led to a significant enhancement in corrosion resistance. However, this process did not result in any improvement in frictional behavior of the nitrocarburized surface. The wear mechanisms were governed predominantly by the abrasive action of the slider on the surface irrespective of the counterface material(SiC and Bearing steel). When the specimen was sliding against a SiC counterface, the oxide films were destroyed during the early stage of the sliding process and the wear debris of the oxide film at the sliding track had a great influence on the friction coefficient. On the other hand, when sliding against a bearing steel counterface, the slider was mainly worn out due to the much higher hardness of the surface hardened layer. The fluctuation of the friction coefficient of $400^{\circ}C$-oxidized/ nitrocarburized specimen is much severer than that of $500^{\circ}C$ specimen, due to the less amount of wear debris.

우주잔해 손해에 대한 국제책임 (International Liability for Damage Caused by Space Debris)

  • 김동욱
    • 항공우주정책ㆍ법학회지
    • /
    • 제23권2호
    • /
    • pp.173-205
    • /
    • 2008
  • 우주잔해는 제도상에서 운용되고 있는 인공위성 및 우주선 등에 빈번히 손해를 야기하고 있으며 때로는 지구상으로 떨어지기도 한다. 이러한 잔해는 점점 증가하고 있으며 그에 따라 타국의 우주물체 및 지상 손해가 발생할 가능성도 높아지고 있다. 그러나 현 국제법 체계에서는 미확인 우주잔해로 인한 손해뿐 아니라 확인이 가능한 우주잔해로 인한 손해에 대해서도 구제 받는 것이 쉽지 않다. 이것은 우주잔해로 인한 손해에 대해서 명확히 규정하고 있는 법규가 없기 때문이다. 이러한 한계를 극복하기 위해서는 책임협약의 일부 내용을 수정하거나 새로운 법체계를 세우는 것이 바람직한 것으로 보인다. 예컨대 우주물체를 새롭게 정의하면서 우주잔해를 포함해야 하고, '발사' 개념을 좀 더 명확히 하여 발사의 범위를 특정해야 한다. 또한 우주잔해 손해의 책임 주체를 등록 전과 등록 후로 나누어서 등록 전에는 발사국들이 공동으로 또는 개별적으로 책임을 지고 등록 후에는 등록국 내지는 소유국이 책임을 지도록 해야 한다. 타국의 우주물체에 대한 손해배상체계도 현재의 과실책임에서 '절대책임'으로 변경하는 것이 필요하다. 특히 우주잔해에 의한 손해에 대해서는 그 과실이 있다고 해도 그 입증이 쉽지 않고 또한 그 잔해가 과실이 아닌 정상적인 우주활동의 부산물로 발생되는 경우가 많기 때문에 현 책임협약상의 과실책임을 부과하기가 어려우므로 지상 제3자 손해에 대한 책임과 마찬가지로 '절대책임'으로 변경하는 것이 바람직하다. '미확인' 잔해에 의한 손해를 입는 경우에 대한 구제방안으로서 보험, 우주배상기금의 조성, 시장점유율책임이론의 도입 등을 제시했는데 책임협약의 개정 또는 별도의 국제조약 등을 통해 규정되어야 할 것이다. 우리나라도 앞으로 천문학적인 가격의 인공위성을 다량 보유하게 될 것인데, 점점 증가하는 우주잔해로부터 자유로울 수 없다. 만약 우주잔해로부터 우리의 인공위성이 피해를 입게 된다면 위성 자체의 손해 뿐 아니라 운용상의 장애 및 기능 불능으로 인한 경제적인 손실이 막대하다 할 것이다. 결국 손해배상을 받지 못하면 우리는 막대한 경제적 손실을 떠안을 수밖에 없고 그것은 국민의 세금과도 연결되어 있다. 그러한 측면에서도 우주잔해에 의한 손해를 구제할 수 있는 방안에 대해 하루 속히 국제적으로 합의가 되어야 할 것이다.

  • PDF

Aerosol Deposition and Behavior on Leaves in Cool-temperate Deciduous Forests. Part 1: A Preliminary Study of the Effect of Fog Deposition on Behavior of Particles Deposited on the Leaf Surfaces by Microscopic Observation and Leaf-washing Technique

  • Watanabe, Yoko;Yamaguchi, Takashi;Katata, Genki;Noguchi, Izumi
    • Asian Journal of Atmospheric Environment
    • /
    • 제7권1호
    • /
    • pp.1-7
    • /
    • 2013
  • To establish the method for investigating the behavior of aerosol particles deposited on the leaf surface against fog water under natural conditions, scanning electron microscopy with energy-dispersive X-ray (SEM-EDX) analysis and wash water analysis by ion chromatography after the washing treatment were performed using leaves of white birch collected from low part of the tree crown and the top of the tree in Sapporo City, Hokkaido, northern Japan. Each of collected leaves was divided into two parts according to the treatment performed: leaf surface (adaxial side) was 1) untreated, and 2) washed with deionized water with a pipette. In untreated samples, many particles of various shapes, including soil particles and organic debris, were deposited on the surface. Particles containing S were found on the surface of samples collected from only low part of the tree crown. After the washing treatment, SEM-EDX analysis revealed that soil particles and particles containing S had been washed off with water, although some particles such as soil particles and organic debris still remained on the leaf surface. The major anion such as $SO{_4}^{2-}$ was detected in wash water of all samples, although the peak of S in X-ray spectra was not detected from samples collected at top of the tree. The combination of SEM-EDX analysis with wash water analysis indicated that $SO{_4}^{2-}$ was deposited on the leaf surface in dissolved state and/or in state of submicron particles. These results suggested that fog water could remove soil particles and particles containing S and $SO{_4}^{2-}$ from the leaf surfaces, but not all particles. There was no difference in sampling position in the tree crown. Our study suggested that combination with SEM-EDX analysis and wash water analysis would be effective for investigation of the behavior of particles on the leaf surface against fog water.

표면파 기법에 의한 콘크리트 사방댐의 콘크리트 강도 등급 평가 (Quality Grading of Concrete Soil Erosion Control Dam in the Aspect of Unconfined Concrete Strength by Surface-Wave Technique)

  • 이창우;조성호;박기형;김민식;윤호중;하사눌
    • 한국산림과학회지
    • /
    • 제101권3호
    • /
    • pp.412-425
    • /
    • 2012
  • 산지계곡부의 토석류 유출을 저지하는 콘크리트 사방댐은 콘크리트의 재료 및 시공 불량, 콘크리트의 열화로 인한 내구성 저하, 국부적으로 발생한 균열 등의 이유로 인하여 사방댐의 일부 또는 전체 구조물이 붕괴되어 그 기능을 손실하는 경우가 있다. 본 논문에서는 이러한 콘크리트 사방댐의 구조적 문제점과 안전성을 파악하여 사전에 대책을 강구하고 효율적인 유지관리를 할 수 있는 방안을 제안하였다. 그 방안은 콘크리트 사방댐 구조물의 콘크리트 압축강도를 비파괴적으로 평가하여 품질등급을 평가하는 것으로, 등급평가 단계에서 비파괴 콘크리트 압축강도 평가를 위해 SASW 기법이라고 하는 표면파 기법을 도입하였다. 또한 SASW 기법을 콘크리트 사방댐의 안정성 가에 활용할 수 있도록 SASW 시험의 현장적용방안, 콘크리트 결함에 따른 자료분석 기법, 평가기준에 대한 제안등에 대한 연구를 수행하였다. 제안된 기법의 적용성과 신뢰성을 평가하기 위하여, 20년 이상 경과된 노후 콘크리트 방댐 5곳에 제안된 표면파 기법의 적용방안을 적용하여 보았다. 그 결과 콘크리트 사방댐의 여러 가지 콘크리트 함에 대해서도 SASW 기법에 의한 품질평가는 신뢰성 있게 수행될 수 있음을 확인할 수 있었고, 본 연구에서 제 안한 품질등급 평가 결과는 사방협회에서 실시한 사방댐 점검결과와 일치하는 결과를 제시하였다.

심층신경망 기반 우주파편 영상 추적시스템 인식모델에 대한 연구 (A Study on the Deep Neural Network based Recognition Model for Space Debris Vision Tracking System)

  • 임성민;김진형;최원섭;김해동
    • 한국항공우주학회지
    • /
    • 제45권9호
    • /
    • pp.794-806
    • /
    • 2017
  • 지속적으로 우주파편이 증가하고 있는 상황에서 국가 우주자산을 안전하게 보호하고 우주개발국으로서 우주환경 보호에 관심을 가지는 것은 중요하다. 우주파편의 급격한 증가를 막기 위한 효과적인 방법 중 하나는 충돌위험이 큰 우주파편들, 그리고 임무가 종료된 폐기위성을 직접 제거해 나가는 것이다. 본 논문에서는 영상기반 우주파편 추적시스템의 안정적인 인식모델을 위해 인공신경망을 적용한 연구에 대해 다루었다. 한국항공우주연구원에서 개발한 지상기반 우주쓰레기 청소위성 테스트베드인 KARICAT을 활용하여 우주환경이 모사된 영상을 획득하였고, 깊이불연속성에 기인한 영상분할 후 각 객체에 대한 구조 및 색상 기반 특징을 부호화한 벡터를 추출하였다. 특징벡터는 3차원 표면적, 점군의 주성분 벡터, 2차원 형상정보, 색상기반 정보로 구성되어있으며, 이 범주를 기반으로 분리한 특징벡터를 입력으로 하는 인공신경망 모델을 설계하였다. 또한 인공신경망의 성능 향상을 위해 입력되는 특징벡터의 범주에 따라 모델을 분할하여 각 모델 별 학습 후 앙상블기법을 적용하였다. 적용 결과 앙상블 기법에 따른 인식 모델의 성능 향상을 확인하였다.

Acid Group이 도입된 TPV (Thermoplastic Vulcanizate)계 열가소성 탄성체의 기계적 물성에 관한 연구 (Studies on Mechanical Properties of Thermoplastic Vulcanizate Containing Acid Group)

  • 김동호;김구니
    • 접착 및 계면
    • /
    • 제16권2호
    • /
    • pp.63-68
    • /
    • 2015
  • 본 연구에서는 carboxylic acid group이 도입된 열가소성 폴리우레탄(thermoplastic polyurethane, TPU)과 동적 가교형 TPV (thermoplastic vulcanizate)계 열가소성 탄성체를 제조하였으며, 탄성체 분자구조 내 acid group의 도입에 따른 기계적 물성, 그립성, 데브리스, 접촉각 및 접착특성 변화에 대해서 평가하였다. 연구결과 acid group이 도입된 경우 수소결합의 증가로 인해 기계적 물성과 wet slip 특성이 향상되었으며, 카르복시산에 의해 표면 극성이 증가되었기 때문에 접착력 또한 향상되었다. 그리고 acid group이 도입된 TPU를 사용해서 TPV를 제조한 결과 TPU 자체에 비해 감성특성과 데브리스(debris) 특성이 향상되었다.

부유성 해양 폐기물에 의한 동지나해의 해양오염(I) - 해역별 수량 분포를 중심으로 - (Marine Pollution of the East China Sea by Floating Marine Debris(I) - Temporal quantity distribution of each zone -)

  • 김종화;김용복
    • 수산해양교육연구
    • /
    • 제23권4호
    • /
    • pp.642-647
    • /
    • 2011
  • In order to analyze the influence of floating marine debris (FMD) in the East China Sea (ECS), a sighting survey was conducted from July 1st to July 14th, 2009 navigating about 966 km using a training vessel "Kaya (1,737 ton)" of Pukyong National University. The sampled zones are divided into 5 transect by observation day during the survey days and again specified with 45 segments per unit hour on the survey routes. The results of distribution of FMD are as follows: 1. The quantities of FMD at the central China Sea(CE) and northern part of Taiwan(NT) were found as total mean of 90.8 ea/hr, 56.7 ea/hr, respectively, and also 36.8 ea/hr, western part of Kyushu district(WJ), 10.7 ea/hr, 8.0 ea/hr, western(OK1) and northern part(OK2) of Okinawa, respectively. 2. Temporal variation of FMD is represented by depicting the sinusoidal curve as shape as tide in CE and OK1. 3. The higher sea surface temperature (SST) is as likely as if Kuroshio current exists strongly, the less quantities are decreased. On the other hand, the coastal zone of ECS and near of Yellow Sea are increased by lower SST.