• Food Science of Animal Resources
• /
• v.31 no.2
• /
• pp.266-272
• /
• 2011

The objective of this study was to investigate the current state of carcass weight distribution and external quality of domestic duck products. A total of 419,164 duck heads were used for the carcass weight distribution analysis. From the results, the average, mode, median, and quartile were 2,164.4, 2,000, 2,200, and 300 g, respectively. Furthermore, carcass yield averaged 70.1% from the live weights of domestic duck products. Duck carcasses had 28.4% external defects and 4.8% external damage. Moreover, the appearance ratio of discoloration was 34.1% and, in particular, the leg region was significantly (p<0.05) higher than that of the other regions. The feather removal defect ratio averaged 44% from the duck carcass surface. The ratio of disjointed and broken bones averaged 9.91% and mostly appeared in wing and leg parts. Fat content was significantly (p<0.05) higher in carcasses with weights >2.3 kg than that of other carcass weight levels, suggesting that market live weight of domestic duck products must be greater than a minimum of 3 kg.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.58 no.5
• /
• pp.11-18
• /
• 2016

The objective of this study was to develop the simple method to estimate ungauged river section for flood stage analysis. Damage prediction should be prioritized using hydrological modeling to reduce flood risk. Mostly, the geographical data using hydrological modeling depends on national river cross-section survey. However because of the lack of measured data, it is difficult to apply to many local streams or small watersheds. For this reason, this study suggest the method to estimate unguaged river cross-section. Simple regression equations were derived and used to estimate river cross-section by analyzing the correlation between the river cross-sectional characteristics (width, height and area). The estimated cross-sections were used to simulate flood level by HEC-RAS (Hydrologic Engineering Center's River Analysis System). The applicability of this method was verified by comparing simulated flood level between measured and estimated cross-section. The water surface elevation of the flood stage analysis was 6.56-7.24 m, 5.33-5.95 m and 6.12-6.75 m for measured cross section, for estimated cross section and for estimated cross section based on DEM elevation, respectively. Further study should consider other factors for more accurate flood stage analysis. This study might be used one of the guidelines to estimate ungauged river section for flood stage analysis.

• 한국문화재보존과학회:학술대회논문집
• /
• 2004.10a
• /
• pp.92-100
• /
• 2004

The host rocks of brick-shaped stone pagoda in the Bunhwangsa temple are lots of kinds andesitic rocks, which has gone through mechanical and chemical weathering. As the overall observation, the pagoda is serious damages by air pollutants, and the northeast parts show the much advanced state of turning white, while the southeast parts are heavily cracked in the materials. The rocks of brick-shaped pagoda body are in a relatively stable condition of weathering and damage except for the abrasion and cracks of the corners. The rocks of the pagoda roof suffer from more symptoms including multiple peel-offs, exfoliation, cracks forming round lines, and falling off stone pieces. The pagoda roof rocks are dominated by the thriving leafy lichens and mosses, especially, there are higher plants (selaginella involvens, dandelions) taking root actively between the brick stones and content mortar. There are even light gray precipitates like stalactites between the rocks of the body, In particular, the 1st and 2nd floor in the east side and the body parts in the north side are the most serious. Their major minerals are calcite, gypsum and clay minerals. The rocks of the stylobate and the tabernacle in all the four directions are composed mainly of granitic rocks. The materials consisting of the tabernacles show the severe splits and distortion, which causes the structural instability. The stylobate rocks are heavily contaminated by some weeds with the often marks of inorganic contamination by secondary hydroxides. The central part of the east stylobate has been sinking, while that of the 1st floor west stylobate is protruded nesting a line of cracks. Accordingly, the inside of the tabernacle is always humid with the constant introduction of rainwater. The stone lion standing in the southeast and northeast side are alkali granite, while that in the southwest and northwest lithic tuff. Each of the stone lion also coated with various colored lichens, mosses, algae, bacteria and bryophyte. The external materials of the pagoda have deteriorated the functions of the rocks and made the loss, falling off, and biological contamination even worse due to the surface weathering. Thus it's urgent to come up with scientific restoration and conservation measures through clinical tests.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.18 no.6
• /
• pp.90-96
• /
• 2014

The electrical resistivity of concrete can be related to two processes involved in corrosion of reinforcement: initiation (chloride penetration) and propagation (corrosion rate). The resisistivity of concrete structure exposed to chloride indicates the risk of early corrosion damage, because a low resistivity is related to rapid chloride penetration and to high corrosion rate. Concrete resistivity is a geometry-independent material property that describes the electrical resistance, which is the ratio between applied voltage and resulting current in a unit cell. In previous study, it was realized that the resistivity of concrete depended on the moisture content in the concrete, microstructural properties, and environmental attack such as carbonation. The current is carried by ions dissolved in the pore liquid. While some data exist on the relationship between moisture content on electrical resistivity of concrete, very little research has been conducted to evaluate the effect of chloride on the conduction of electricity through concrete. The purpose of this study is to examine and quantify the effect of chloride content on surface electrical resistivity measurement of concrete. It was obvious that chloride content had influenced the resistivity of concrete and the relationship showed a linear function. That is, concrete with chloride ions had a comparatively lower resistivity. Decreasing rate of resistivity of concrete was clear at early time, however, after 50 days resistivity was constant irrespective of chloride concentration. Conclusively, this paper suggested the quantitive solution to depict the electrical resistivity of concrete with chloride content.

• Journal of the Korea Concrete Institute
• /
• v.15 no.3
• /
• pp.392-399
• /
• 2003

This paper discusses the validities of insulating curing of cold weather concreting at early stage by applying insulation forms. Tests were carried out using modified insulating form combining existing insulating form and various other insulations in order to develop improved insulation form. Temperature history of concrete using various insulating forms and insulation was measured to determine most effective combination of insulting form. According to results, as for the wall form, under the curing temperature of $-10^{\circ}C$, the temperature of concrete using Euro form drops sharply before 24 hours and lasts below $0^{\circ}C$ for 7 hours. The temperature of concrete using the form combining Polypropylene panel, styrofoam and plywood panel keep above $0^{\circ}C$. And, it is confirmed that the form mentioned above has a favorable effects on enhancing strength development of concrete and the cost to make the forms shows more reasonable than that of existing forms. However, as for the combination methods of insulation form for slab, which is composed of insulating form at the bottom of slab and various surface curing materials at the top of slab, in case of exposed condition at the top of slab, temperature history of concrete goes below $0^{\circ}C$ after 10 hours. In case of the combination of vinyl sheet and curing blanket, it drops below $0^{\circ}C$ after 42 hours. However, in case of the combination of vinyl, styrofoam and curing blanket, it does not go below $0^{\circ}C$ until 55 hours. Accordingly, compared to the case of exposure and the combination of vinyl and curing blanket, it indicates that the combination mentioned above has more effective insulating performance.

• Journal of the Korean GEO-environmental Society
• /
• v.13 no.4
• /
• pp.27-36
• /
• 2012

The water in surface of the earth is frozen under freezing point. The freezing phenomenon, which causes the volume change of soils, affects on the behavior of soils and causes the significant damage on the geotechnical structures. The purpose of this study is to investigate the characteristics of elastic waves in sand-silt mixtures using small size freezing cells, which reflect the frozen ground condition due to temperature change. Experiments are carried out in a nylon cell designed to freeze soils from top to bottom. Bender elements and piezo disk elements are used as the shear and compressional wave transducers. Three pairs of bender elements and piezo disk elements are placed on three locations along the depth. The specimen, which is prepared by mixing sand and silt, is frozen in the refrigerator. The temperature of soils changes from $20^{\circ}C$ to $-10^{\circ}C$. The velocities, resonant frequencies and amplitudes of the shear and compressional waves are continuously measured. Experimental results show that the shear and compressional wave velocities and resonant frequencies increase dramatically near the freezing points. The amplitudes of shear and compressional waves show the different tendency. The dominant factors that affect on the shear wave velocity change from the effective stress to the ice bonding due to freezing. This study provides basic information about the characteristics of elastic waves due to the soil freezing.

• Advances in concrete construction
• /
• v.10 no.2
• /
• pp.171-183
• /
• 2020

The main objective of this study is the assessment of the ability of limestone mortars to resist to different chemical attacks. The ability of polypropylene (PP) fibres waste used as reinforcement of these concrete materials to enhance their durability is also studied. Crushed sand 0/2 mm which is a fine limestone residue obtained by the crushing of natural rocks in aggregates industry is used for the fabrication of the mortar. The fibres used, which are obtained from the waste of domestic plastic sweeps' fabrication, have a length of 20 mm and a diameter ranging between 0.38 and 0.51 mm. Two weight fibres contents are used, 0.5 and 1%. The durability tests carried out in this investigation included the water absorption by capillarity, the mass variation, the flexural and the compressive strengths of the mortar specimens immersed for 366 days in 5% sodium chloride, 5% magnesium sulphate and 5% sulphuric acid solutions. A mineralogical analysis by X-ray diffraction (XRD) and a visual inspection are used for a better examination of the quality of tested mortars and for better interpretation of their behaviour in different solutions. The results indicate that the reinforcement of limestone mortar by PP fibres waste is an excellent solution to improve its chemical resistance and durability. Moreover, the presence of PP fibres waste does not affect significantly the water absorption by capillarity of mortar nether its mass variation, when exposed to chloride and sulphate solutions. While in sulphuric acid, the mass loss is higher with the presence of PP fibres waste, especially after an exposure of 180 days. The results reveal that these fibres have a considerable effect of the flexural and the compressive behaviour of mortar especially in acid solution, where a reduction of strength loss is observed. The mineralogical analysis confirms the good behaviour of mortar immersed in sulphate and chloride solutions; and shows that more gypsum is formed in mortar exposed to acid environment causing its rapid degradation. The visual observation reveals that only samples exposed to acid attack during 366 days have showed a surface damage extending over a depth of approximately 300 ㎛.

• Korean journal of applied entomology
• /
• v.13 no.4 s.21
• /
• pp.209-216
• /
• 1974

Life history and control methods of Aphanostigma iakusuiense Kishida were studied during April to November, 1974, in the Naju pear orchard area, Cholla Namdo. The results are summarized as follows: 1. More than $60\%$ of wintering eggs were found at the height of 1.5 to 2.0m from the soil surface, with approximately $10\%$ at 0.5 to 1.5m and 1.5 to 2.5m respectively. 2. There was little difference in the size of egg masses and hatching ratio $(12.7-13.7\%)$ between the varieties of host trees, Mansamkil and Kooksoo. 3. Hatching was not observed until April 6, but hatches of $12.8\%$ on April 13 and $90.6\%$ on May 4 were found. 4. During the hatching season in early spring, 8 chemicals were applied to test effectiveness of control. C8514, Metasystox, Acar 338, and Parathion were more effective than either Sevin or Malix for control of this insect. 5. Highest populations of pear phylloxera ocurred from August 20 to September 20 at which time levels of eggs and larvae were simillar in abundance. 6. In tests for control of this insect after in paper bags, DDVP, Loxon, C8514, Sevin, and Binapacryl were more effective than either EPN or Otran. 7. Predacious mite, Protolaelape pygmaeus Miller, and several species of lady beetles (Coccinellidae) preying on this insect as natural enemies were collected. The predation ratio of mites varied according to region: that is 0.77 to $18.6\%$ in Bia Orchard; $7.88-48.7\%$ in Noan Orchard and almost none in Youngsanoo Orchard. 8. The varietal difference in fruit damage by this insect was in the order of Choseng Chuck, Kooksoo, followed by Sin Ko, Mansamkil, Keumchon Choo, and Changsimrang.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.15 no.3
• /
• pp.119-136
• /
• 2012

The goal of this study is to apply the IPCC(Intergovernmental Panel on Climate Change) concept of vulnerability to climate change and verify the use of a combination of vulnerability index and fuzzy logic to flood vulnerability analysis and mapping in Seoul using GIS. In order to achieve this goal, this study identified indicators influencing floods based on literature review. We include indicators of exposure to climate(daily max rainfall, days of 80mm over), sensitivity(slope, geological, average DEM, impermeability layer, topography and drainage), and adaptive capacity(retarding basin and green-infra). Also, this research used fuzzy model for aggregating indicators, and utilized frequency ratio to decide fuzzy membership values. Results show that the number of days of precipitation above 80mm, the distance from river and impervious surface have comparatively strong influence on flood damage. Furthermore, when precipitation is over 269mm, areas with scare flood mitigation capacities, industrial land use, elevation of 16~20m, within 50m distance from rivers are quite vulnerable to floods. Yeongdeungpo-gu, Yongsan-gu, Mapo-gu include comparatively large vulnerable areas. This study improved previous flood vulnerability assessment methodology by adopting fuzzy model. Also, vulnerability map provides meaningful information for decision makers regarding priority areas for implementing flood mitigation policies.

• Journal of Korea Water Resources Association
• /
• v.42 no.3
• /
• pp.191-200
• /
• 2009

A localized torrential rainfall and flash floods which are more frequently occurred by extraordinary atmospheric phenomena and rising sea surface temperature require more hydrological data collecting and analysis for small watershed. Urban watershed hydrological data monitoring system is needed because of big flood potential damage and lack of urban watershed hydrological data. Therefore, Urban Flood Disaster Management Research Center operates small experimental catchments(Sinnae1, Gunja, and Children's Park) observing and analyzing hydrological data(rainfall, stage, and discharge). In this study, the discharge of combined sewage for Gunja experimental drainage is analyzed with weekly data and day of the week data. Through several analyses in analyzing the urban runoff characteristics and managing the urban sewage system, direct runoff is calibrated and verified by the estimated values of rainfall-runoff model(SWMM).