• 비파괴검사학회지
• /
• 제17권3호
• /
• pp.174-183
• /
• 1997

터빈 로타 디스크는 디스크, keyway, bore surface, hub, rim 등으로 구성되고 이들 부분이 전형적인 균열 발생 부위이다. 이러한 부위는 기하학적 형상이 복잡해 적절한 탐촉자의 선정, wedge 설계 및 가공, 검사체의 형상과 크기에 따른 정상신호와 결함신호의 분류 및 평가가 필요하다. 본 연구에서는 디스크 keyway 및 bore surface에 인공결함을 갖는 디스크 대비 시험편을 제작하여 구조, 형상별 초음파 신호를 수집하여 분석하였고 디스크 곡률에 따른 wedge를 설계, 제작하였다. 본 연구를 통하여 형상별 신호를 정의할 수 있었고 디스크부에 발생되는 결함을 검출하고 평가할 수 있는 초음파검사 기술을 확립하였다. 또한 현장 적용에 있어서 성공적인 결과를 입증하였다.

• 대한기계학회논문집B
• /
• 제36권12호
• /
• pp.1209-1215
• /
• 2012

관내 예혼합화염에서 나타나는 평면화염부터 난류화염거동까지의 천이현상에 대한 실험적 연구를 수행하였다. 천이현상의 관찰을 위해 관내에 평면화염을 형성하였고, 화염면 중심에 $CO_2$ 레이저를 조사하여 국부 화염속도를 증가시켰다. 레이저에 의해 변형된 화염은 전체 화염면적의 증가와 진동 불안정성의 거동을 보이며 전파한 후, 큰 소음과 함께 난류화염의 거동을 보이며 관 바닥으로 전파한다. 본 연구에서는 난류화염거동이 나타나기 전까지의 변형된 화염에 대한 동적 거동을 관찰하여 분석하였고, 이에 대한 물리적 모델을 제시하였다.

• 한국해안·해양공학회논문집
• /
• 제23권5호
• /
• pp.335-344
• /
• 2011

곡면의 경계를 가지는 수로에서 비선형 파랑의 상호작용을 모의하기 위한 비정수압 자유수면 모형이 개발되었다. 제안된 모형은 비선형의 3차원 Navier-Stokes 방정식을 곡선좌표 영역에서 계산단계 분리법의 일종인 압력수정법에 의하여 수치적으로 해석된다. 특히, 연직방향으로 변형된 형태의 엇갈린 격자를 이용하여 상대적으로 간단하게 압력방정식과 자유수면 경계조건을 구성하였다. 개발된 모형의 수치해석 정확도는 2차원의 수치 파수조에서 파랑의 비선형 정도에 대하여 5차의 스토스우크스 해석해와 비교하였다. 본 모형의 실제적 적용은 원형의 수로에서 회절과 반사에 의해 변형되는 비선형 파의 변형에 초점을 맞추어 수행하였다. 두개의 파를 중첩한 고비선형의 파에 대한 경우를 제외하고 수치해석 결과는 비선형적인 영향을 고려하지 않은 해석해의 선형적인 중첩과 일치하였다. 두개의 파를 중첩한 고비선형의 파에 대한 모의를 통하여 본 모형은 원형의 수로에서 비선형 군파의 변형에관한 수치적인 모의 가능성을 제시하였다.

• 터널과지하공간
• /
• 제14권1호
• /
• pp.43-53
• /
• 2004

본 연구에서는 지하 채굴적이 상부 지표 구조물의 안정성에 미치는 영향을 검토하기 위하여, 지하 채굴적의 심도와 보강 조건을 달리하는 네 가지의 경우에 대해 축소모형실험을 실시하였다. 이를 위해 실험목적에 부합한 모형 실험장치를 제작하였으며, 모형재료는 석고, 모래, 물의 혼합물을 사용하였다. 채굴적의 심도가 깊은 모형의 균열 개시압력은 얕은 모형에 비해 2.5배 더 크게 나타나 채굴적이 깊을수록 지반의 안정성은 우수하였다. 구조물의 하부 지반을 그라우팅으로 보강한 모형은 무보강 모형에 비해 균열 개시압력이 2.4배 커져, 보강을 실시하면 지반 안정성이 증가하는 것으로 나타났다. 또한, 대규모 보강을 실시한 경우는 소규모 보강에 비하여 최대 침하량이 작을 뿐 아니라 침하곡선이 완만하여 경사와 곡률도 작아지므로 지반 안정성은 보다 더 커질 것으로 판단된다.

• Archives of Pharmacal Research
• /
• 제23권5호
• /
• pp.507-512
• /
• 2000

This study set out to improve the physical and pharmaceutical characteristics of the present formulation using an appropriate experimental design. The work described here concerns the formulation of the dispersible tablet applying direct compression method containing roxithromycin in the form of coated granules. In this study $2^3$ factorial design was used as screening test model and Central Composite Design (CCC) associated with response surface methodology was used as optimization study model to develop and to optimize the proper formulation of roxithromycin dispersible tablet. The three independent variables investigated were functional excipients like binder (X1), disintegrant (X2) and lubricant (X3). The effects of these variables were investigated on the following responses: hardness (Y1), friability (Y2) and disintegration time (Y3) of tablet. Three replicates at the center levels of the each design were used to independently calculate the experimental error and to detect any curvature in the response surface. This enabled the best formulations to be selected objectively. The effect order of each term to all response variable was X3> X2> Xl> X1＊X2> X2＊X2> X2＊X3> X3＊X3> Xl＊X3> Xl＊Xl and model equations on each response variables were generated. Optimized compositions of formula were accordingly computed using those model equations and confirmed by following demonstration study. As a result, this study has demonstrated the efficiency and effectiveness of using a systematic formulation optimization process to develop the tablet formulation of roxithromycin dispersible tablet with limited experiment.

• 한국실내디자인학회논문집
• /
• 제26권6호
• /
• pp.163-171
• /
• 2017

Brick is not only aesthetically beautiful and emotional material, but also eco-friendly and good building commodity for human health. Nonetheless, the use of brick has declined, due to the difficulty of building high-rise buildings and the limitation of the free form implementation. However, modern society is increasingly interested in environmentally friendly finishing materials for solving environmental problems. From this point of view, the brick architecture is being reexamined as a material to improve the living environment and to provide comfort without destroying nature. In addition, the development of digital technology enables the implementation of various types of masonry method and curved forms. Parametric design is one of the ways to realize the curved forms and various architectural expressions for brick architecture. In this background, the purpose of this study is to develop algorithms that can easily generate curved brick walls through parametric design, enable various pattern designs, and respond to real-time feedback. The details of the study are as follows. First of all, we examine organic architecture, the trend of brick architecture, and the concept of parametric design. Secondly, In order to generate curved surface with complex curvature, major planning factors affecting form generation are examined. Finally, we develop a parametric design method that consists of generating a curved surface for brick arrangement, implementing a parametric algorithm, and generating a curved form using bricks. Consequentially, we propose an algorithm that can maximize the use of ready-made bricks without using cut bricks to design curved walls and present efficient and economical design alternatives.

• 한국정밀공학회지
• /
• 제29권3호
• /
• pp.289-294
• /
• 2012

There are several indicators to represent characteristics of chemical mechanical planarization (CMP) such as material removal rate (MRR), surface quality and removal uniformity on a wafer surface. Especially, the removal uniformity on the wafer edge is one of the most important issues since it gives a significant impact on the yield of chip production on a wafer. Non-uniform removal rate at the wafer edge (edge effect) is mainly induced by a non-uniform pressure from nonuniform pad curvature during CMP process, resulting in edge exclusion which means the region that cannot be made to a chip. For this reason, authors tried to minimize the edge exclusion by using an edge profile control (EPC) ring. The EPC ring is equipped on the polishing head with the wafer to protect a wafer from the edge effect. Experimental results showed that the EPC ring could dramatically minimize the edge exclusion of the wafer. This study shows a possibility to improve the yield of chip production without special design changes of the CMP equipment.

• Restorative Dentistry and Endodontics
• /
• 제45권3호
• /
• pp.30.1-30.11
• /
• 2020

Objectives: This micro-computed tomographic (CT) study aimed to compare the shaping abilities of ProTaper Next (PTN), One Shape (OS), and One Curve (OC) files in 3-dimensionally (3D)-printed mandibular molars. Materials and Methods: In order to ensure standardization, 3D-printed mandibular molars with a consistent mesiobuccal canal curvature (45°) were used in the present study (n = 18). Specimens were instrumented with the OC, OS, or PTN files. The teeth were scanned pre- and post-instrumentation using micro-CT to detect changes of the canal volume and surface area, as well as to quantify transportation of the canals after instrumentation. Two-way analysis of variance was used for statistical comparisons. Results: No statistically significant differences were found between the OC and OS groups in the changes of the canal volume and surface area before and after instrumentation (p > 0.05). The OC files showed significantly less transportation than the OS or PTN systems for the apical section (p < 0.05). In a comparison of the systems, similar values were found at the coronal and middle levels, without any significant differences (p > 0.05). Conclusions: These 3 instrumentation systems showed similar shaping abilities, although the OC file achieved a lesser extent of transportation in the apical zone than the OS and PTN files. All 3 file systems were confirmed to be safe for use in mandibular mesial canals.

• 한국정밀공학회지
• /
• 제30권1호
• /
• pp.32-38
• /
• 2013

Small mobile robots which use round wheels are suitable for driving on a flat surface, but it cannot climb the obstacle whose height is greater than the radius of wheels. As an alternative, legged-wheels have been proposed by many researchers due to its better climbing performance. However, driving and climbing performances have a trade-off relationship so that their driving performance should be sacrificed. In this study, in order to achieve both driving and climbing performances, a new transformable wheel was developed. The developed transformable wheel can have a round shape on a flat surface and change its shape into legged-wheel when it makes a contact with an obstacle. For design of the transformable wheel, the performance of legged-wheel was analyzed with respect to the number and curvature of the leg, and then the new transformable wheel was designed based on the analysis. Contrary to the existing transformable wheels that contain additional actuators for the transformation, the developed transformable wheel can be unfolded without any additional actuator. In this study, in order to validate the transformable wheel, a simple robot platform was fabricated. Consequently, it climbed the obstacle whose height is 2.6 times greater than the wheel radius.

• 대한기계학회논문집B
• /
• 제28권7호
• /
• pp.789-799
• /
• 2004

An experimental study is conducted to investigate the effects of duct corrugation angle on heat/mass transfer characteristics in wavy ducts of a primary surface heat exchanger application. Local heat/mass transfer coefficients on the wavy duct sidewalls are determined by using a naphthalene sublimation technique. The corrugation angles(${\alpha}$) of the wavy ducts are 145$^{\circ}$, 130$^{\circ}$, 115$^{\circ}$ and 100$^{\circ}$. And the Reynolds numbers based on the duct hydraulic diameter vary from 300 to 3,000. The results show that at the low Re(Re $\leq$1000), the secondary vortices called Taylor-Gortler vortices perpendicular to the main flow direction are generated due to effect of duct curvature. By these secondary vortices, high heat/mass transfer regions are formed on both pressure-side and suction-side walls. At the high Re(Re $\geq$ 1000), these secondary flows are vanished with helping flow transition to turbulent flow and the regions which show high heat/mass coefficients by flow reattachment are formed on suction side. As corrugation angle decreases, the local peak Sh induced by Taylor-Gortler vortices increase at Re $\leq$1000. At high Re(Re $\geq$ 1000), by the existence of different kind of secondary flows called Dean vortices, non-uniform Sh distribution appears along spanwise direction at the narrow corrugation angle (${\alpha}$=100$^{\circ}$). Average Sh also increase by the enhanced effect of secondary vortices and flow reattachment. More pumping power (pressure loss) is required with the smaller corrugation angle due to the enhancement of flow instability.