• 한국산학기술학회논문지
• /
• 제10권1호
• /
• pp.19-24
• /
• 2009

구조물 동특성 변경법이란 부가 구조물의 첨가나 삭제, 재료 물성치의 변경, 구조물의 형상변경 등을 이용해 구조물의 동특성을 향상시킬 수 있는 매우 효과적인 방법이다. 하지만 이러한 구조물 동특성 변경법 중 구조물의 형상 변경을 통해 그 구조물의 동특성을 향상시키는 방법은 지금까지는 주로 엔지니어의 경험이나 많은 시간을 요하는 시행착오법에 의존해 왔다. 따라서, 앞선 연구를 통해 이러한 구조물의 형상 변경을 통한 동특성변경법에 있어서 기존의 경험이나 시행착오법에 의존하는 방법이 아닌, 체계화된 방법론을 제안하게 되었으며 하드디스크 드라이브 (HDD)에 성공적으로 적용하였다. 제안된 그루브를 통한 표면형상변형 동특성변경법을 검증해 보기 위하여, 본 연구에서는 모든 요소가 엠보싱 되어 있는 극한의 경우로부터 최적화를 수행하고 앞선 연구에서 얻어진 최적화 결과와 비교함으로써 제안된 방법론의 효과를 검토해 볼 수 있었으며, 1차 고유진동수를 높이기 위한 최적화 결과 그루브의 형상은 앞선 연구결과와 같음을 알 수 있었다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 춘계학술대회논문집
• /
• pp.128-131
• /
• 2005

Structural Dynamics Modification (SDM) is a very effective technique to improve structure's dynamic characteristics by adding or removing auxiliary structures. changing material properties and shape of structure. Among those of SDM technique, the method to change shape of structure has been mostly relied on engineer's experience and trial-and-error process which are very time consuming. In order to develop a systematic method to change structure shape, surface grooving technique is studied and successfully applied to HDD cover model. To check the effectiveness of this surface grooving technique, the grooved HDD cover design was manufactured using rapid prototyping and experimentally tested to prove the effectiveness of the grooving method as one of SDM techniques. And the modal strain energy and eigenvalue sensitivity method for choosing the initial starting point are compared.

• 한국지구과학회지
• /
• 제21권2호
• /
• pp.188-200
• /
• 2000

15년간의 안면도의 landsat TM 영상과 50여 년의 지형도 및 25년 사이의 항공사진을 토대로, 지형, 지질답사와 산림조사를 실시하고 이들로부터 지질특성, 지형변화 및 산림자원의 변화경향을 파악하였다. 소나무 숲만을 대상으로 볼 때, 겨울철의 식생지수가 0.5 이상인 지역이 소나무 숲과 일치하며 대체적으로 30년 내지 50년 연령의 숲에서 최대의 식생지수를 보이며 고령으로 가면서 약간 감소할 뿐, 별 차이를 보이지 않는다. 활엽수 및 초지와 침엽수의 구분은 계절별 식생지수의 급격한 변화 및 지형과의 대비로서 가능하였다. 지형변화는 창기리 부근에서 약 370년 전 운하를 건설한 이후, 조석에 의해 지속적인 침식이 진행 중이며 해안선에 발달해있던 만곡부는 방조제의 축조로 간척사업이 특히 과거 30여 년 동안에 진행되어 논 경작지가 크게 증가되었다. 소나무 숲의 면적을 해석하면, 1986년에는 소나무 삼림면적이 35.91km$^2$, 1993년에는 33.15 km$^2$이며, 안면도 남동부의 장곡리, 누동리에서는 1986년에는 넓게 분포했던 소나무 숲이 93년에는 초지로 바뀌어 있음이 나타나고, 중북부에서는 대체로 소나무 숲의 면적이 1986년에 비하여 1993년에 증가한 것으로 해석된다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 하계학술대회 논문집 C
• /
• pp.1897-1899
• /
• 2004

In this paper, in order to analyze the characteristics of degradation by salt water with insulation cover and OC wire(outdoor cross-linked polyethylene insulated wire) used in power receiving system, an experimental apparatus has been designed and fabricated. An insulation cover and OC wire were installed in an experimental apparatus, and degraded in each case of 2%, 5%, 10% salinity during 12 weeks. An optical microscope was used to observe a changing process of sample surface, and an electrical safety was analyzed by measuring dielectric breakdown voltages of samples. As salinity increased, so ununiformity of sample surface increased. The breakdown wasn't produced to 50kV about samples regardless of salinity, testing period.

• 센서학회지
• /
• 제26권2호
• /
• pp.141-147
• /
• 2017

A pressure sensor in pulse measurement system is a core component for precisely measuring the pulse waveform of radial artery. A pulse sensor signal that measures the pulse wave in contact with the skin is affected by the temperature difference between the ambient temperature and skin surface. In this study, we found experimentally that the signal changes of the pressure sensors and a temperature sensor were caused by the temperature of the wrist surface while the pressure sensor was contacted on the skin surface for measuring pulse wave. To observe the signal change of the pulse sensor caused by temperature increase on sensor surface, Peltier device that can be kept at a set temperature was used. As the temperature of Peltier device was kept at $35^{\circ}C$ (the maximum wrist temperature), the device was put on the pulse sensor surface. The temperature and pressure signals were obtained simultaneously from a temperature sensor and six pressure sensors embedded in the pulse sensor. As a result of signal analysis, the sensor pressure was decreased during temperature increase of pulse sensor surface. In addition, the signal difference ratio of pressure and temperature sensors with respect to thickness of cover layer in pulse sensor was increased exponentially. Therefore, the signal of pressure sensor was modified by the compensation equation derived by the temperature sensor signal. We suggested that the thickness of cover layer in pulse sensor should be designed considering the skin surface temperature.

• 정보저장시스템학회논문집
• /
• 제1권1호
• /
• pp.58-66
• /
• 2005

Pseudo-Near Field Recording (Pseudo-NFR) system is proposed to prevent contamination and oxidation of media surface occurred in conventional NFR systems. To solve these critical problems of the NFR systems, we investigate the optimal thickness of cover layer for Pseudo NFR. This paper presents the theoretical analysis for cover layer thickness based on the measured length of dust particle and numerical simulation for the temperature distribution using Finite Difference Time Domain (FDTD) method and heat conduction equation. To verify the simulation results, we conduct and compare simulation results in case of far field MO recording and near field MO recording. A measured dust particle length in general environment was mostly less than $20{\mu}m$, and the optimal thickness of cover layer is $30{\mu}m$ in this case. Based on the designed optimal cover layer thickness, temperature distribution is simulated to have $800{\~}850^{\circ}C$.

• KIEAE Journal
• /
• 제10권3호
• /
• pp.11-16
• /
• 2010

This paper has attempted to investigate the change in soil moisture volume and temperature of architecture by planting ground(soil thickness and soil mixture ratio) and ground cover plants(Sedum sarmentosum, Zoysia japonica, Chrysanthemum zawadskii) for middle region green roof system. For this, a test was conducted on the roof of Konkuk University building from April 2009 to October 2009. In terms of treatment, five types(SL, $P_7P_1L_2$, $P_6P_2L_2$, $P_5P_3L_2$, $P_4P_4L_2$) depending on soil mixture ratio and two types(15cm, 25cm) by soil depth were created. Results of soil moisture volume by soil mixture ratio in the 15cm soil thickness showed that the difference was significance between simple soil and mixture soil treatment, however, the statistical significance was not recognized according to soil mixture ratio. In case of 25cm soil thickness, soil moisture volume by soil mixture ratio was more higher 7Vol.%~10Vol.% in the mixture soil than simple soil treatment. In terms of districts planted ground cover plants, soil volume moisture differed among plants in the order Zoysia japonica 17.74 Vol.%$34.86^{\circ}C$, district non-planted $27.49^{\circ}C$, Sedum sarmentosum $25.11^{\circ}C$, Chrysanthemum zawadskii $23.08^{\circ}C$, Zoysia japonica $24.45^{\circ}C$ respectively So, concrete surface showed more higher $5^{\circ}C{\sim}15^{\circ}C$ than other things among the all the time. Result of inner temperature of the architecture and soil, it was measured inner of architecture $25.69^{\circ}C$, inner district non-planted $24.29^{\circ}C$, Chrysanthemum zawadskii $23.90^{\circ}C$, Zoysia japonica $24.02^{\circ}C$, Sedum sarmentosum $25.13^{\circ}C$, respectively.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2008년도 International Symposium on Remote Sensing
• /
• pp.382-385
• /
• 2008

MODIS images have a great advantage of high temporal resolution to monitor land cover changes in a large area. The moderate and low spatial resolution satellite images are incomparably economic than high resolution satellite images. As diverse satellite images are provided recently, strategies using satellite images are necessary for continuous, effective and long-term land monitoring. This research purposed to use MODIS images to monitor land cover in Korean peninsula for long-term and continuous change detection. To maximize the advantages of high temporal resolution, the change detection was based on the MODIS temporal profiles of the surface reflectance for one year. In this study as the reflectance patterns of year 2005 were compared with the reflectance patterns of year 2007, the changed pixels could be detected during two years. To set up the threshold value for the decision of change, ASTER images with the higher spatial resolution, 15m, were used for this study. The test area covered the suburban area of metropolitan city, Seoul, where the landcover changes have been frequently happened.

• 한국측량학회:학술대회논문집
• /
• 한국측량학회 2004년도 추계학술발표회 논문집
• /
• pp.161-166
• /
• 2004

Seoul has experienced a rapid urban expansion over the past three decades. This paper reports an investigation into the application of Landsat imagery for detecting urban growth and assessing its impact on surface temperature in the region. Land cover/use change detection w3s carried out by using Landsat data. The results revealed a notable urban growth in the study area. This urban expansion had raised surface radiant temperature in the urbanized area. The method using remote sensing data based on GIS was found to be effective in monitoring and analysing urban growth and in evaluating urbanization impact on surface temperature.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2003년도 Proceedings of ACRS 2003 ISRS
• /
• pp.908-910
• /
• 2003

In this paper the extraction method for the best suitable green vegetation area in urban area, Daegu, Korea, was developed using satellite images (1994, 1999, Landsat TM). For this, the GIS overlay analysis of GVI (Green Vegetation Index), SBI (Soil Brightness index), NWI (None-Such wetness Index) was performed to estimate the best suitable green vegetation area. Also, the statistical documents, algorithm and Tasseled-Cap index were used to recognize the change of land cover such as cultivation area, urban area, and damaged area. Through the result of this study, it is possible to monitor the large sized reclamation of land by drainage or damaged area by forest fires. Moreover, information with the change of green vegetation and the status of cultivation by GVI, but also moisture content by percentage by NWI and surface class by SBI can be obtained.