• Journal of Environmental Impact Assessment
• /
• v.18 no.6
• /
• pp.445-452
• /
• 2009

This study surveys the surface water environment in Southwest sea areas of Vietnam in order to evaluate the current environment. It collects and analyzes experimental results of programs, scientific subjects, and international projects relevant to ecological areas and coastlines of Kien Giang province. The methods analyzed and discussed by specialists are evaluated according to pollution coefficients established by the World Health Organization (WHO), sampling methods, and case study analyses. Comparison between the scale of pollution levels and the surface water quality in experimental areas of Long Xuyen Quadrangle shows a light-moderate pollution level. In Ca Mau Peninsula, the surface water source is only slightly polluted. Sea areas and islands are also light-moderately polluted. Computing results from water quality indices (WQI) show the level of pollution in experimental sites. Activities such as constructing infrastructures for tourism, exploiting minerals, and increasing population accelerate environmental pollution by deteriorating inherently sensitive ecosystems like corals, sea grass, mangrove swamps, and Melaleuca forests. Surveying and evaluating the present situation of surface water are fundamental solutions for environmental protection in the Southwest sea areas of Vietnam.

• Science of Emotion and Sensibility
• /
• v.2 no.1
• /
• pp.105-111
• /
• 1999

In order to introduce the touch to engineering and industries, it must be preceded to dstablish a quantitative barometer of the feeling. for this purpose, we developed a tactile measuring system to measure physical properties of texture, such as surface roughness, friction coefficient and compliance. The tactile measuring system uses a LASER type displacement sensor, which is a non-contacting system, in measuring the surface roughness. By considering that human tactile system is a contacting mechanism, this non-contacting method needs to be modified. As a precedent research of that, we compared the contacting and non-contacting method in this paper. Surface roughness of ten cloths were measured by using the measuring system, then compared to the test results using the Kawabata evaluation system(KES), which uses a contacting method in measuring the surface roughness.

• Journal of Ship and Ocean Technology
• /
• v.5 no.4
• /
• pp.29-43
• /
• 2001

In this paper, free surface flows around an advancing two-dimensional rectangular cylinder piercing the free surface are studied using numerical and experimental methods. Especially, wave breaking phenomenon around the cylinder is treated in detail. A series of numerical simulations and experiments were performed for the purpose of comparison. For the numerical simulations, a finite difference method was adopted with a rectangular grid system, and the variation of the free surface was computed by the marker density method. The computational results are compared with the experiments. It is confirmed that the present numerical method is useful for the numerical simulation of nonlinear free surface waves around a piercing body.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.11 no.10
• /
• pp.878-884
• /
• 1998

We have investigated that the monodomain alignment of nematic liquid crystal (NLC) is obtained with polarized ultraviolet(PUV) light irradiation on polyimide (PI) surface. The LC alignment capability increases with increasing the UV light irradiation time. The polarized UV light irradiation on oblique angle of 60。 irradiated on PI surface rotated by 90。 at 10 min. after being normally irradiated on PI surface at 30 min., the generated pretilt angle of NLC is about 2.5。. The pretilt angle of NLC is attributed to the interaction between the LC molecules and the asymmetric triangular structure of polymer surface due to photo-depolymerization of polymer with the oblique UV light on PI surface. The voltage -transmittance and response time characteristics of photo-aligned twisted nematic (TN)-LCD with UV light irradiation time 60 min. were almost same in comparison with the rubbing-treated TN-LCD.

• Ocean Systems Engineering
• /
• v.7 no.4
• /
• pp.371-398
• /
• 2017

Calm water wave resistance plays a very important role in ship hull design. Numerical methods are meaningful for this reason. In this study, two prevailing methods, the Neumann-Kelvin and the Rankine source method, were implemented and compared. The Neumann-Kelvin method assumes linearized free surface boundary condition and only needs to mesh the hull surface. The Rankine source method considers nonlinear free surface boundary condition and meshes both the ship hull surface and free surface. Both methods were implemented and the wave resistance of a Wigley III and three Series 60(Cb=0.6, 0.7, 0.8) hulls were analyzed. The results were compared with experimental results and the merits of both numerical techniques were quantified. Based on the results, it is concluded that the Rankine source method is more accurate in the calculation of the wave-making resistance. Using the Neumann-Kelvin method, it is found to be easier to model the hull and can be used for slender ships to solve problems like wave current coupling calculation.

• Journal of the Society of Naval Architects of Korea
• /
• v.28 no.2
• /
• pp.21-27
• /
• 1991

This paper outlines the method of formulating the bi-cubic B-spline surface of ship hull, employing the open uniform knot vector as well as the periodic uniform knot vector. An appropriate set of B-spline control vertices to generate the B-spline surface is determined by obtaining the pseudoinverse matrix of basis functions. The comparison between the given offsets and the resulting coordinates from the generated ship hull surface shows a good agreement. To check the fairness of the surface Gaussian curvature is calculated on many small subpatches and displayed on the black-and-white plot of the isoparametric net of the surface.

• Applied Science and Convergence Technology
• /
• v.23 no.1
• /
• pp.54-59
• /
• 2014

The roll-to-roll (R2R) fabrication method to make micro-scale pillar arrays for biomimetic functionalization of surfaces is presented. Inspired by the micro-structure of plants in nature, a surface with a synthetic micro-scale pillar array is fabricated via maskless photolithography. After the surface is SAM (self-assembled monolayer) coated with trichlorosilane in a vacuum desiccator, it displays a hydrophobic property even in R2R replicas of original substrate, whose properties are further characterized using various pitches and diameters. In order to perform a comparison between the original micro-pattern and its replicas, surface morphology was analyzed using scanning electron microscopy and wetting characteristics were measured via a contact angle measurement tool with a $10{\mu}L$ water droplet. Efficient roll-to-roll imprinting for a biomimetic functionalized surface has the potential for use in many fields ranging from water repelling and self-cleaning to microfluidic chips.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.15 no.1
• /
• pp.1-6
• /
• 2002

The hot carried degradation in a metal oxide semiconductor device has been one of the most serious concerns for MOS-ULSI. In this paper, three types of LDD(lightly doped drain) structure for suppression of hot carried degradation, such as decreasing of performance due to spacer-induced degradation and increase of series resistance will be investigated. in this study, LDD-nMOSFETs used had three different drain structure, (1) conventional surface type LDD(SL), (2) Buried type LDD(BL), (3) Surface implantation type LDD(SI). As experimental results, the surface implantation the LDD structure showed that improved hot carrier lifetime to comparison with conventional surface and buried type LDD structures.

• Journal of The Korean Society of Integrative Medicine
• /
• v.6 no.2
• /
• pp.37-44
• /
• 2018

Purpose : The aim of this study is to compare the trunk muscle activities in trunk stabilization on the stable and unstable supporting surfaces using by sEMG. Methods : The subjects of this study include seventeen male. We measured sEMG activities of rectus abdominis and erector spine in subjects during trunk stabilization such as plank exercise, quadruped position, quadruped position with rising hand and foot on the stable and unstable surface. Results : sEMG activities in plank exercise was significantly higher in left rectus abdominis and left erector spine on unstable surface then stable surface (p<.05). sEMG activities of left rectus abdominis and left erector spine in quadruped position was significantly higher in unstable surface than stable surface (p<.05). In comparison with posture, Plank exercise showed a significant difference increase other postures (p<.05). Conclusion : sEMG activities of muscle in trunk stabilization was significantly higher in unstable surface than stable surface and plank exercise. So, we suggest that trunk stabilization on the unstable supporting surface and plank exercise were more effective method than stable surface to improve trunk muscles activities.

• Journal of International Academy of Physical Therapy Research
• /
• v.10 no.2
• /
• pp.1756-1762
• /
• 2019

Background: Functional ankle instability (FAI) indicating a decrease in muscle strength, proprioception, neuromuscular control, balance and postural control function. Objective: To investigate the effect of jumping exercise on the supporting surface on the ankle muscle thickness, proprioceptive sensation, and balance in adults with FAI. Design: Randomized Controlled Trial. Methods: Twenty young people with FAI were randomly assigned to the unstable supporting surface jump group (N=10) and the stable supporting surface jump group (N=10). The intervention was conducted three times a week for eight weeks, and for 30 minutes per session. Trampoline was used as an unstable support surface and the stable support surface was carried out on a regular floor. The thickness of the tibialis anterior muscle and medial gastrocnemius muscle was measured by ultrasonography, and the proprioception of dorsiflexion and plantarflexion was measured using an electrogoniometer. The dynamic balance was also measured with a balance meter. Results: The the muscle thickness of the medial gastrocnemius muscle was significantly higher in the stable supporting surface jump group than in the unstable supporting surface jump group (p<.05). Furthermore, the plantar flexion proprioception and dynamic balance were significantly improved in the unstable supporting surface jump group than in the stable supporting surface jump group in the intergroup comparison (p<.05). Conclusions: The conclusion has been reached in this study that the jumping exercise on the unstable supporting surface could be a more effective in improving FAI than the regular surface.