• Journal of the Korean Solar Energy Society
• /
• 제30권3호
• /
• pp.71-80
• /
• 2010

This study carried out to understand the thermal characteristics of various surface material which compose the city through the observation in the summer. To examine passive cooling effect of planting of building, it is arranged four different materials that is natural grass, grass block, concrete slab and artificial grass. The results of this study are as follows; (1) Natural grass and grass block show the lower surface temperature because of the structures of leaf can do more thermal dissipation effectively. (2) There is little surface temperature between artificial grass and concrete. But there is little high surface temperature difference between natural grass and concrete because of latent heat effect. (3) The concrete can play a role of the tropical nights phenomenon as high heat capacity of concrete compare with other materials. (4) It is nearly same color in artificial grass and natural grass but there is large difference between natural grass and artificial grass at albedo. There is different albedo in near infrared ray range. (5) A short wave radiation gives more effect at the globe temperature than long wave radiation. (6) The artificial turf protected the slab surface temperature increase in spite of thin and low albedo materials.

• Journal of Korea Multimedia Society
• /
• 제4권2호
• /
• pp.97-107
• /
• 2001

In this paper, an illuminant estimation algorithm of a chromatic digital images proposed. The proposed illumination estimation method has two phases. First, the surface spectral reflectances are recovered. In this case, the surface spectral reflectances recovered are limited to the maximum highlight region (MHR) which is the most achromatic and highly bright region of an image after applying intermediate color constancy process using a modified gray world algorithm. Next, the surface reflectances of the maximum highlight region are estimated using the principal component analysis method along with a set of given Munsell samples. Second, the spectral distribution of reflected lights of MHR is selected from the spectral database. That is a color difference is compared between the reflected lights of the MHR and the spectral database that is the set of reflected lights built by the given Munsell samples and a set of illuminants. Then the closest colors from the spectral database are selected. Finally, the illuminant of an image can be calculated dividing the average spectral distributions of reflected lights of MHR by the average surface reflectances of the MHR. In order to evaluate the proposed algorithm, experiments with artificial and real captured color-biased scenes were performed and numerical comparison examined. The proposed method was effective in estimating the spectral of the given illuminant sunder various illuminants.

• Journal of the Korean institute of surface engineering
• /
• 제47권2호
• /
• pp.57-62
• /
• 2014

The biogas holder is composed of an outer membrane and an inner membrane which are subject to outdoor exposure and gas exposure respectively. The influence of weathering conditions on the photo-degradation of a biogas holder was investigated. Tests were performed under three different methods - outdoor exposure tests (Seosan, Arizona), accelerated tests (Xenon-are lamp) with the outer-membrane of biogas. Moreover, the changes in the aging process were monitored using color difference, gloss, the contact angle and an optical microscope. Changes in physical properties, such as decrease reduction in gloss, decrease in the contact angle, increase in color difference were observed in the aging process. The comparison between membrane 3B, 4B and membrane 5B under xenon-arc were discussed. Membrane 5B was very sensitive to ultraviolet (UV) ray. There were many difficulties in the outdoor exposure test due to acid rain, dust, and stain resistance.

• Restorative Dentistry and Endodontics
• /
• 제25권3호
• /
• pp.482-486
• /
• 2000

The purpose of the present study was first, to evaluate the relationship between composite surface conversion and surface discoloration, second, to know if there was difference in surface discoloration between celluloid-strip-finished composite surface and polished surface. In addition, the discoloration of composite surface was also evaluated with visual inspection or digital camera with high resolution monitor, Z100, Tetric Ceram, Spectrum, and Aelitfil were used. The composite surfaces were celluloid-strip finished (group 1), polished (group 2), celluloid-strip finished under nitrogen gas purging (group 3) or only light cured without finishing or polishing under nitrogen gas purging (group 4). The microhardness of each samples were also measured in each group. The samples of each group were also divided into 4 subgroup whether they were immediately placed in disclosing solution (0.2% Elythrosin, pH 7.0) (subgroup1), 1 day after light curing(subgroup 2), 3day after light curing(subgroup 3) or 7 day after light curing(subgroup 4). The computer controlled spectrophotometer was used to determine CIELAB coordinates ($L^*$, $a^*$, $b^*$). The amounts of color difference were compared. The results were as follows; 1. There was no difference in discoloration between celluloid strip finished composite surface and polished surface. 2. The samples discolored more when they were placed in disclosing solution immediately after polymerization than other groups. 3. When the samples were light cured under nitrogen gas purging and without polishing process, they discolored more than other groups even though they showed higher micro hardness. 4. With visual inspection or digital camera, only a limited information was available in detecting composite surface discoloration.

• Journal of the Korean Society of Clothing and Textiles
• /
• 제21권2호
• /
• pp.471-481
• /
• 1997

Denims were treated with neutral cellulase, acid cellulase, stone, and stone-neutral cellulase respectively at different cellulase concentrations varying treatment times in rotary washer. The effect of washing on denim was estimated by the changes in weight, color, back staining, tear strength, flex stiffness, and surface characteristics. Also the comparison of neutral cellulase, acid cellulase, stone, and stone-neutral cellulase washings was studied. Washing removes surface fibers and provides weight loss, color difference, back staining, and a decrease in tear strength and in flex stiffness. Stone-neutral cellulase washing and acid cellulase washing have a larger washing effect than neutral cellulase washing and stone washing.

• Korean Journal of Food Science and Technology
• /
• 제21권2호
• /
• pp.294-299
• /
• 1989

The quality of dehydrated instant rice produced by a few selected processing methods with short grain milled rice was evaluated. Instant rice produced by process 2 had high rehydration rate, and those by processes 1 and 2 revealed light brown color with less lightness. Instant rice produced by processes 1 and 2 with ammonium carbonate treatment had more uniform porous microstructure, as shown by SEM micrographes, and microstructural difference was noticed between instant rice prepared with government rice and Akibari. Instant rice produced by processes 1 and 2 had less sensory color score, and those by processes 2 and 4 had higher sensory cohesiveness. Overall quality of instant rice produced by process 2 was better, except color.

• Current Photovoltaic Research
• /
• 제10권3호
• /
• pp.73-76
• /
• 2022

BIPV (Building Integrated Photovoltaic) supplemented the minimum area problem required when installing existing solar modules. However, in order to apply it to buildings, research was needed to increase the aesthetics of solar modules and use them as a design. Accordingly, modules with color applied to the entire surface of the photovoltaic module were being developed, but there was a disadvantage of low power. Therefore, by dividing and bonding the cell strips, it was possible to improve the output power by applying a shingled technology in which other divided cells overlap in a busbar region where light couldn't be received. Shingled technology was advantageous for color modules because the front busbar part that degrades aesthetics was removed. In this research, four color shingled solar modules (Green, Yellow, Blue, Gray) were manufactured and power degradation was analyzed by measuring transmittance and reflectance. Gray color had 80.83% transmittance, which was 31.31% higher than Yellow, resulting in a power difference of 4.45 W.

• Textile Coloration and Finishing
• /
• 제32권1호
• /
• pp.44-50
• /
• 2020

In this study, pre-treatment was performed on kapok, a hydrophobic fiber, to compare dyeability by hydrophilization. The pretreatment conditions of kapok fiber were used with different amounts of sodium oleate(NaO), a fatty acid-based anionic surfactant, and xanthan gum(XG) as a natural thickener. At this time, NaO and XG were separately or mixed treated with 0.01%, 0.1%, 1% aqueous solution at 80℃ for 30 min. Hydrophilicity through dyeing was confirmed using Sappan wood extract. Therefore, SEM observation was performed to investigate the surface change of kapok fiber according to the conditions. The surface color difference was also analyzed. Pretreated kapok fibers were made from nonwoven fabrics and the contact angles were measured to determine their hydrophilization. The surface of the fiber after pretreatment was found to be cracked when NaO and NaO were mixed with XG. The surface color was the highest in a^⁎ and K/S values after the simultaneous treatment of NaO and XG, followed by NaO pretreatment and XG pretreatment. The contact angle of kapok fiber made of nonwoven fabric was slightly lower at 300g/㎡ than the fabric weight of 150g/㎡. Such hydrophilized nonwoven kapok fiber are expected to be used in various fields.

• Journal of dental hygiene science
• /
• 제22권1호
• /
• pp.57-66
• /
• 2022

Background: This study aimed to investigate the effect of selecting commercially available blending teas and applying them to bovine teeth on color change over time. Methods: After selecting healthy bovine teeth, using a cutting-disc, 105 specimens with a dimension of 5×5×3 mm were prepared, and 15 specimens were distributed to each group. Black tea was used as a positive control, water was used as a negative control, and blended tea of five types was used as an experimental group. First, pH and buffering capacity were measured with a pH meter, and tooth color was determined using a spectrophotometer before immersion in the blending tea solution and 1, 5, 7, 14, and 21 days after immersion. Thereafter, the shape change of the enamel surface was observed using a scanning electron microscope, and SPSS ver.26 was used to analyze the color change. Results: The average pH of the five blending teas in the experimental group was 3.78, and the pH of group 3 (strawberry rhubarb) was the lowest at 3.22. The pH levels of black tea and water were 5.19 and 7.30, respectively. The buffering capacity was the highest in group 3 at both pH levels of 5.5 and 7.0. The L^*a^*b^* color change according to immersion time was the largest in group 4 (rooibos yellow flower), and the amount of color change was large in black tea and group 4. As a result of observing the enamel surface of bovine teeth, changes in the surface shape were noted in all groups immersed in the experimental solution for 21 days, except for water. Conclusion: There was a significant difference between the experimental groups in terms of color change according to the immersion time, and color and enamel surface changes were observed in black tea and all experimental groups, except for water.

• Restorative Dentistry and Endodontics
• /
• 제32권4호
• /
• pp.356-364
• /
• 2007

The purpose of this study was to assess the background color-interceptive ability ana opacity of opaque shade composites (Universal composite, Filtek Z350, Charisma, Clearfil ST, Palpaque Estelite, Esthet-X, and Metafil Flo). Twenty four background specimens (diameter 5.5 mm, thickness 3.0 mm) with Root dentin Mustard (Bisco, Schaumburg, IL, USA) were made. The CIE $L^*a^*b^*$ value of background specimens was measured by a spectrophotometer (Spectrolino, GretagMacbeth, Regensdorf, Switzerland). Three specimens in every group were filled on the background specimens. The surface color of samples was measured by a spectrophotometer in 3.0 mm and every thickness to 0.5 mm while grinding. The color difference in the background color along with 3.0 mm specimen gauged the masking effect in each thickness while grinding and polishing. The opacity was calculated in 1 mm thick specimens. The opacity was in the decreasing order of Clearfil ST, Metafil Flo, Filtek Z350, Palpaque Estelite, Universal composite, Charisma, and Esthet-X (p < 0.05). As the thickness get reduced, $L^*$ value showed decreasing, $a^*$ increasing tendency. The surface color difference between pair of the 3.0 mm thick specimen and after grinding in same opaque resin was above 3.3 except Clearfil ST and Metafil Flo. The color difference (${\Delta}E^*$) between pair of background specimen and opaque resin built-up specimen showed more than 10.0 regardless kinds and thickness. The variance in opacity characteristics and color of the opaque composites is dependent upon manufacturer. When using the opaque resin, the optical properties of each material must be considered as well as cavity.