• 제목/요약/키워드: surface balance

Search Result 862, Processing Time 0.023 seconds

Difference in Core Stability and Muscle Balance of the Pilates Teaser Motion According to Kinds of the Ground and Skills (지면의 종류와 숙련도에 따른 필라테스 티져(Teaser)동작의 코어안정화와 근육 균형의 차이)

  • Shin, Yun-Kyung;Yi, Kyung-Ock
    • Korean Journal of Applied Biomechanics
    • /
    • v.25 no.1
    • /
    • pp.65-76
    • /
    • 2015
  • Objective : The purpose of this study was to analyse the differences in core stability and muscle balance of the pilates Teaser motion according to the surfaces and skills. Methods : There were 10 subjects in this study with 5 being skilled and 5 that were not skilled. The independent variables were surfaces (high elastic & aluminum) and skills (skilled & unskilled). Dependent variables were core stability and muscle balance. Core stability was measured by Force Platform (9872, Switzerland), 3D Imagery (IBS-2000, EXYMA) was used to understand the muscle balance. In order to do the Teaser movement subjects had to lay flat on their back and then lean forward as much as possible and hold the position for 10 seconds. Afterwards, they would lay back down again. A camera (MHS-PM5K, SONY) was used to make 4 phases (take off, recoil forward, holding, recoil backward) during the teaser exercise to analyze movement. In this study quantitative and qualitative analysis was used. For the statistical analysis, 2X2 ANOVA was used to analyze the differences in movement time, X,Y,Z maximum force, center of pressure and angles according to different phases. 2X3 ANOVA was used to analyze the differences in muscle balance via SPSS 18.0. Results : Soft. Elastic mat had a longer holding time, lower Fx/ Fy/ Fz, shorter Fx trajectory, larger angle and shorter gaps in muscle balance than a hard surface in skilled subjects. This was because the mat can help to recruit and then sustain core fine muscles during holding time in the Teaser movement.

Correlations between Biomechanical Characteristics, Physical Characteristics, and the Ability to Maintain Dynamic Sitting Balance on an Unstable Surface in the Disabled with Spinal Cord Injury

  • Kim, Solbi;Chang, Yoonhee;Kim, Gyoosuk
    • Journal of the Ergonomics Society of Korea
    • /
    • v.33 no.1
    • /
    • pp.15-25
    • /
    • 2014
  • Objective: This study aims to analyze the factors that affect the ability to maintain dynamic sitting balance (DSB), biomechanical characteristics, and physical characteristics in spinal cord injuries (SCI) patients. Background: Virtual ski training systems, ski equipment, and training protocols for disabled skiers are being studied to spread awareness. However, few studies have been reported on the sitting balance ability associated with chair mono skiing. Method: A dynamic sitting balance border system was built to investigate the ability to maintain dynamic sitting balance in SCI patients. Trunk muscle activity was evaluated by electromyogram while conducting dynamic sitting balance tests. The trunk muscle strength was tested with a portable handheld dynamometer. Physical activity scores were measured with the physical activity recall assessment. Results: There were high levels of correlation between the ability to maintain DSB and trunk flexor strength, extensor strength, rotator strength, and physical activity score. However, height, weight, and injury level in SCI patients were not correlated with the ability to maintain DSB. Additionally, strong negative correlations were found between muscle activities of the external oblique and lumbar erector spinae muscles and the ability to perform the backward tilt test. Trunk extensor muscle activity during the ball lifting test was significantly higher than in other tests. Conclusion: The results indicate that improving trunk muscle strength and physical activity can increase the ability to maintain DSB. Application: The findings of a close relationship between trunk strength, physical activity, and the ability to maintain DSB need to be reflected in the chair mono ski training program.

The Effects of Action Observation Training on Lower Limb Muscle Activity and Dynamic Balance in Chronic Stroke Patients (동작관찰훈련이 만성 뇌졸중 환자의 하지 근 활성도 및 동적 균형에 미치는 영향)

  • Kim, Jae-Woon;Son, Young-Lan;Kim, Yong-Nam
    • PNF and Movement
    • /
    • v.17 no.2
    • /
    • pp.245-252
    • /
    • 2019
  • Purpose: The purpose of this study was to determine the effects of action observation training on lower limb muscle activity and dynamic balance in chronic stroke patients. Methods: This study evaluated 20 chronic stroke patients who were divided randomly into a control and an experimental group comprising 10 patients each. Both the experimental group and the control group performed the general exercise therapy provided by the hospital, but the experimental group also performed action observation training. Lower limb muscle activity was measured with a surface electromyograph, and dynamic balance was measured with the Timed Up and Go test and the 10-meter walk test. The paired t-test was used to compare the groups before and after the experiment. Furthermore, the independent t-test was used to assess differences in the degree of change between the two groups before and after the experiment. Results: The within-group comparisons for both the experimental group and the control group showed significant differences in muscle activity and dynamic balance (p<0.05). In a comparison between the groups, the differences in the muscle activity and dynamic balance of the experimental group appeared significant compared with those of the control group (p<0.05). Conclusion: The study results indicate that action observation training is effective in improving the muscle activity and dynamic balance of chronic stroke patients.

Estimation of Spatial Evapotranspiration Using satellite images and SEBAL Model (위성영상과 SEBAL 모형을 이용한 공간증발산량 산정 연구)

  • Ha, Rim;Shin, Hyung-Jin;Lee, Mi-Seon;Kim, Seong-Joon
    • KSCE Journal of Civil and Environmental Engineering Research
    • /
    • v.30 no.3B
    • /
    • pp.233-242
    • /
    • 2010
  • SEBAL (Surface Energy Balance Algorithm for Land) developed by Bastiaanssen (1995) is an image-processing model comprisedof twenty-five sub models that calculates spatial evapotranspiration (ET) and other energy exchanges at the surface. SEBAL uses image data from Landsat or other satellites measuring thermal infrared radiation, visible and near infrared. In this study, the model was applied to Gyeongancheon watershed, the main tributary of Han river Basin. ET was computed on apixel-by-pixel basis from an energy balance using 4 years (2001-2004) Landsat and MODIS images. The scale effect between Landsat (30 m) and MODIS (1 km) was evaluated. The results both from Landsat and MODIS were compared with FAO Penman-Monteith ET. The absolute errors between satellite ETs and Penman-Monteith ET were within 12%. The spatial and temporal characteristics of ET distribution within the watershed were also analyzed.

Daily Streamfiow Model based on the Soil Water (유역 토양 수분 추적에 의한 유출 모형)

  • 김태일;여재경;박승기
    • Magazine of the Korean Society of Agricultural Engineers
    • /
    • v.33 no.4
    • /
    • pp.61-72
    • /
    • 1991
  • A lumped deterministic model(DAWAST model) was developed to predict the daily streamflow. Since the streamflow is dominantly determined by the soil water storage in the watershed, the model takes the soil water accounting procedures which are based on three linear reservoirs representing the surface, unsaturated, and saturated soil layers. The variation of soil water storage in the unsaturated zone is traced from the soil water balance on a daily basis. DAWAST model consists of 5 parameters for water balance and 3 parameters for routing. A optimization technique of unconstrained nonlinear Simplex method was applied for the determination of the optimal parameters for water balance. Model verification was carried out to the 7 hydrologic watersheds with areas of 5.89-7,126km$^2$ and the results were generally satisfactory. The daily streamflow can be arbitrarily simulated with the input data of daily rainfall and pan evaporation by the DAWAST model at the station where the observed streamflow data of short periods are available to calibrate the model parameters.

  • PDF

Numerical Modeling of Soot Formation in $C_2H_4$/Air Turbulent Non-premixed Flames ($C_2H_4$/Air 비예혼합 난류화염의 매연생성 모델링)

  • Kim, Tae-Hoon;Woo, Min-O;Kim, Yong-Mo
    • Journal of the Korean Society of Combustion
    • /
    • v.15 no.4
    • /
    • pp.22-28
    • /
    • 2010
  • The Direct Quadrature Method of Moments (DQMOM) has been presented for the solution of population balance equation in the wide range of the multi-phase flows. This method has the inherently interesting features which can be easily applied to the multi-inner variable equation. In addition, DQMOM is capable of easily coupling the gas phase with the discrete phases while it requires the relatively low computational cost. Soot inception, subsequent aggregation, surface growth and oxidation are described through a population balance model solved with the DQMOM for soot formation. This approach is also able to represent the evolution of the soot particle size distribution. The turbulence-chemistry interaction is represented by the laminar flamelet model together with the presumed PDF approach and the spherical harmonic P-1 approximation is adopted to account for the radiative heat transfer.

Self-Regulation of Star Formation Rates: an Equilibrium Vieww

  • Kim, Chang-Goo;Ostriker, Eve C.
    • The Bulletin of The Korean Astronomical Society
    • /
    • v.41 no.2
    • /
    • pp.55.2-55.2
    • /
    • 2016
  • In this talk, I will present a theoretical and numerical framework for self-regulation of the star formation rates (SFRs) in disk galaxies. The theory assumes (1) force balance between pressure support and the weight of the interstellar medum (ISM), (2) thermal balance between radiative cooling in the ISM and heating via FUV radiation from massive young stars, and (3) turbulent energy balance between dissipation in the ISM and driving by momentum injection of SNe. Numerical simulations show vigorous dynamics in the ISM at all times, but with proper temporal and spatial averages, all the expected balances hold. This leads to a scaling relation between mean SFRs and galactic gas and stellar properties, arising from the fundamental relationship between SFR surface density and the total midplane pressure.

  • PDF

THE PHYSICALLY-BASED SOIL MOISTURE BALANCE MODEL DEVELOPMENT AND APPLICATIONS ON PADDY FIELDS

  • Park, Jae-Young;Lee, Jae-Hyoung
    • Water Engineering Research
    • /
    • v.1 no.3
    • /
    • pp.243-256
    • /
    • 2000
  • This physically-based hydrologic model is developed to calculate the soil-moisture balance on paddy fields. This model consists of three modules; the first is the unsaturated module, the second is the rice evapotranspiration module with SPAC(soil-plant-atmospheric-continuum), and the third is the groundwater and open channel flows based upon the interrehtionship module. The model simulates the hydrlogical processes of infiltration, soil water storage, deep perocolation or echarge to the shallow water table, transpiration and evaporation from the soil surface and also the interrelationship of the groundwater and river flow exchange. To verify the applicability of the developed model, it was applied to the Kimjae Plains, located in the center of the Dongjin river basin in Korea, during the most serious drought season of 1994. The result shows that the estimated water net requirement was 757mm and the water deficit was about 5.9% in this area in 1994. This model can easily evaluate the irrigated water quantity and visualize the common crop demands and soil moisture conditions.

  • PDF

Lifter Design for Enhanced Heat Transfer in Rotating Counter-Current Flow Reactor and Application to One Dimensional Heat Balance Model (회전식 대향류 반응기 내 열전달 증진을 위한 리프터 설계와 1차원 열평형 모델로의 적용)

  • Lee, Hookyung;Choi, Sangmin
    • 한국연소학회:학술대회논문집
    • /
    • 2013.06a
    • /
    • pp.51-54
    • /
    • 2013
  • Rotary kiln reactors are frequently equipped with an axial burner with which solid burden material is directly heated. Lifters are commonly used along the length of the system to lift particulate solids and increase the heat transfer between the solid bed and the combustion gas. The material cascading from the lifters undergoes drying and reacting through direct contact with the gas stream. In this study, volume distribution of materials held within lifters was modeled according to the different lifter configuration and appropriate configuration was used for the design purpose. This was applied to the one-dimensional heat balance model of a counter-current flow reactor, which contributes to the increase of the effective contact surface, and thereby enhances the heat transfer.

  • PDF

Comparison of Land Surface Temperatures from Near-surface Measurement and Satellite-based Product

  • Ryu, Jae-Hyun;Jeong, Hoejeong;Choi, Seonwoong;Lee, Yang-Won;Cho, Jaeil
    • Korean Journal of Remote Sensing
    • /
    • v.35 no.4
    • /
    • pp.609-616
    • /
    • 2019
  • Land surface temperature ($T_s$) is a critical variable for understanding the surface energy exchange between land and atmosphere. Using the data measured from micrometeorological flux towers, three types of $T_s$, obtained using a thermal-infrared radiometer (IRT), a net radiometer, and an equation for sensible heat flux, were compared. The $T_s$ estimated using the net radiometer was highly correlated with the $T_s$ obtained from the IRT. Both values acceptably fit the $T_s$ from the Terra/MODIS (Moderate Resolution Imaging Spectroradiometer)satellite. These results will enhance the measurement of land surface temperatures at various scales. Further, they are useful for understanding land surface energy partitioning to evaluate and develop land surface models and algorithms for satellite remote sensing products associated with surface thermal conditions.