• Journal of the Korean Magnetics Society
• /
• v.8 no.5
• /
• pp.261-269
• /
• 1998

Induced anisotropy with the energy of $6{\times}10^4\; J/m^3$ is obtained in amorphous Sm-Fe based thin films which are fabricated by rf magnetron sputtering under a magnetic field of 500~600 Oe. Compared with conventional thin films, the anisotropic thin films exhibit a similar "saturation" magnetostriction, but show a very large anisotropy in magnetorstiction which is of significant practical importance due to increased strain at a particular direction. It is shown from a systematic investigation over a wide composition range for binary Sm-Fe alloys that anisotropy is also induced, though small, during a normal sputtering procedure due to the stray field, and the largest anisotropy is observed in the composition range of 25~30 at.% Sm. Furthermore, induced anisotropy is also found to be formed by magnetic annealing, but the anisotropy energy is much smaller than that by magnetic sputtering. This may be because the volume diffusion by which atoms move during magnetic annealing to from induced anisotropy is much slower than the surface diffusion which is expected to be a dominant factor during magnetic sputtering.puttering.

• The Korean Journal of Physiology and Pharmacology
• /
• v.4 no.1
• /
• pp.41-46
• /
• 2000

Using fluorescence polarization of 12-(9-anthroyloxy)stearic acid (12-AS) and 2-(9-anthroyloxy)stearic acid (2-AS), we evaluated the differential effects of local anesthetics on differential rotational rate between the surface (in carbon number 2 and its surroundings including the head group) and the hydrocarbon interior (in carbon number 12 and its surroundings) of the outer monolayer of the total lipid fraction liposome extracted from synaptosomal plasma membrane vesicles. The anisotropy (r) values for the hydrocarbon interior and the surface region of the liposome outer monolayer were $0.078{\pm}0.001$ and $0.114{\pm}0.001,$ respectively. This means that the rate of rotational mobility in the hydrocarbon interior is faster than that of the surface region. In a dose-dependent manner, the local anesthetics decreased the anisotropy of 12-AS in the hydrocarbon interior of the liposome outer monolayer but increased the anisotropy of 2-AS in the surface region of the monolayer. These results indicate that local anesthetics have significant disordering effects on the hydrocarbon interior but have significant ordering effects on the surface region of the liposome outer monolayer.

• The Journal of the Acoustical Society of Korea
• /
• v.20 no.1
• /
• pp.62-67
• /
• 2001

Velocities of leaky surface acoustic waves (LSAW/sub s/) were measured by using a line-focus polyvinylidene fluoride (PVDF) transducer and compared with theoretically calculated ones. Isotropic materials of Cu, Al, fused quartz, and anisotropic one of Z-cut α-quartz crystal were used as specimens. The velocities were obtained by the separation time between wave components reflected directly from the surface of specimen and LSAW components according to the defocusing distance. The measured velocities well agree with the theoretical results within 1％ error, and it was shown that the leaky pseudo-surface acoustic wave (LPSAW) as well as the LSAW propagates with the typical 6-fold anisotropy on the (0,0,1) surface of α-quartz.

• Geophysics and Geophysical Exploration
• /
• v.2 no.3
• /
• pp.137-141
• /
• 1999

In order to estimate the anisotropy of the medium, we deployed a series of 120-sources in a borehole, and simultaneously recorded 3-component seismic data at 5 locations on the surface. We have tried to estimate the directional velocities by comparing the first arrivals at different receivers. For that purpose, the receiver statics must be corrected prior to pick the first arrivals. However, in an IVSP with a limited number of receiver points, it may not possible to estimate a reliable receiver statics, therefore, instead of using individual first arrival times, we tried to estimate the move-out velocity at each records. From this analysis, we have found that there exists a measurable amount of difference in directional velocities, and confirmed that the velocity anisotropy agrees with the results of the previous studies conducted in this area.

• Journal of the Korean Society for Precision Engineering
• /
• v.15 no.5
• /
• pp.167-175
• /
• 1998

A mathematical formulation is presented to model anisotropy from the deformation textures developed in a forming process. In this work, a micro-mechanical-based polycrystalline analysis is implemented into a consistent finite element method for the anisotropic, viscoplastic deformation of polycrystalline metals. As suggested by Taylor, the deformation of each grain in an aggregate is assumed to be same as the macroscopic deformation of an aggregate or a macro-continuum point. Algorithms are developed to represent the plastic anisotropy, such as the anisotropic yield surface and R-value, from the predicted deformation texture. As applications, the evolution of texture in rolling, upsetting and drawing/extrusion processes are simulated and the corresponding changes of mechanical properties such as yield surface and R-value are predicted.

• Journal of Korean Vacuum Science & Technology
• /
• v.5 no.2
• /
• pp.33-37
• /
• 2001

We measured x-ray magnetic circular dichroism of Co films on Pd(111) surface with and without Pd capping layer at the Co L$_2$,$_3$ edges. Perpendicular magnetization and orbital-moment enhancement are induced by the capping layer. The increase of perpendicular magnetic anisotropy induced by capping layer is considered to result from the increase of surface anisotropy due to the hybridization at the surface.

• Korean Journal of Materials Research
• /
• v.17 no.9
• /
• pp.500-506
• /
• 2007

The effects of anisotropic surface energy on the microstructure development of porous materials have been studied through Monte Carlo simulation using a three dimensional lattice. The changes in porosity ($f_v$), mean grain diameter ($D_s$), fraction of connected pores ($f_{v,c}$) and contiguity of the solid phase (C) were examined in cases with three different ${\gamma}_{SV}$ relations and initial grain diameters ($D_{s,o}$). It has been found that larger ${\gamma}_{SV}$ enhances sintering of particles and increases C and does not change $D_s$. And Introducing anisotropic ${\gamma}_{SV}$ brought an increase in $f_v$ and $f_{v,c}$ and an decrease in $D_s$ and C, and this tendency become more marked for fine $D_{s,o}$.

• Journal of Magnetics
• /
• v.5 no.4
• /
• pp.135-138
• /
• 2000

In order to study the effect of the magnetic anisotropy on the giant magnetoresistance in a Co/Cu multilayered system, the angle dependent magnetoresistance (MR) was measured. The experimental results showed that the maximum MR ratio depends on the angle between the direction of the applied field and the easy axis. The angular modulation of the MR ratio can be explained by the alignments of the two 'effective' magnetization vectors that are bound to their own easy axes. Two maxima observed in MR loops at the second antiferromagnetic maximum are discussed in relation to the magnetic anisotropy, The simulated results under the assumption of the existence of two in-plane easy axes in the sample are compared with the experiments.

• Proceedings of the Korean Magnestics Society Conference
• /
• 2000.09a
• /
• pp.307-314
• /
• 2000

In order to study the effect of the magnetic anisotropy on the giant magnetoresistance (GMR), the angle dependent magnetoresistance (MR) was measured. The experimental results show that the maximum MR ratio depends on the angle between the direction of the applied field and that of the easy axis. The angular modulation of the MR ratio can be explained by the alignments of the two 'effective' magnetization vectors that are bound to their own easy axes. The typical property of MR loops at 2$\^$nd/ antiferromangtic maximum (AFM) such as two maxima was discussed in relation with the magnetic anisotropy (MA). The simulated results under an assumption of the two in-plane easy axes, which exist in the sample, were compared with the experiments.

• Journal of the Korean institute of surface engineering
• /
• v.31 no.3
• /
• pp.151-156
• /
• 1998

코발트계 비정질 합금을 여러 온도 구간 및 시간에 대해서 열처리하며 표면 결정화 현상이 자기 이방성에 미치는 영향을 탐구하였다. 자기 이방성은 비정질 표면의 결정 구조에 민감한 변화를 보였는데 면심입방점 코발트에 많은 결함이 존재할 경우 자기이방성이 최대치를 나타내였다.