• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2001년도 창립10주년 제20회 학술발표회
• /
• pp.91-91
• /
• 2001

• 소성∙가공
• /
• 제17권7호
• /
• pp.517-522
• /
• 2008

A visco-plastic self-consistent (VPSC) polycrystal model has been applied to simulate texture simulation and anisotropic properties of DP steels during deep drawing process. In order to evaluate the strain path during deep drawing, a steady state was assumed in the flange part of deep drawn cup. The final stable orientations were strongly dependent on the initial location in the blank. The evolution of anisotropy of DP steel sheets has been demonstrated through comparison of plastic strain rate vector at the different plastic strain levels.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 하계학술대회 논문집
• /
• pp.463-465
• /
• 2002

In order to increase perpendicular magnetic anisotropy of magnetic layer and prepare magnetic recording layer with a good quality by epitaxial growth between magnetic layer and, we prepared Co$\_$77/Cr$\_$20/Ta$_3$/Si doublelayer for perpendicular magnetic recording media which was promoted as next generation recording media on slide glass substrate. The thickness of magnetic layer and Underlayer were varied from 20 to 100 nm and 5 to 100 m, respectively. The surface morphology and crystal structure of the CoCrTa/Si film were examined with XRD and AFM. Prepared thin films showed improvement of dispersion angle of c-axis orientation Δ$\theta$$\_$50/ caused by inserting amorphous Si underlayer.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 영호남학술대회 논문집
• /
• pp.323-326
• /
• 2000

In this study, we used Brewster-Angle Microscope(BAM) to study on the molecular orientation of monolayer on the water surface. The behaviors of molecules on three different subphase have been observed. Reproducible $\pi$-A isotherm have been obtained only on information about phase transition by molecular area. BAM facilitates the observation of morphology by optical anisotropy and thickness in monolayer and multilayers as BAM is shown to be sensitive to anisotropy of film. Every transition was found by BAM technique, either as a dramatic change in degree of contrast or as a sudden alteration of molecular action and $\pi$-A isotherm.

• 한국전기전자재료학회논문지
• /
• 제17권5호
• /
• pp.530-535
• /
• 2004

We have studied 90$^{\circ}$ twisted nematic mode switching by fringe electric field(F-TN mode) using a liquid crystal (LC) with negative dielectric anisotropy. In the device, two polarizers are parallel each other, electrodes exist only on bottom substrate, and one of rubbing direction is coincident with polarizer axis. Therefore, the cell shows a black state before a voltage is applied. With a bias voltage generating fringe-electric field, the LC twists perpendicular to fringe electric field such that the LCs are almost homogeneously aligned except near the bottom surface since the negative type of the LC is used. Consequently, the new device exhibits much wider viewing angle than that of the conventional TN mode due to in-plane switching and relatively high transmittance since the LC director above whole electrode area aligns parallel to the polarizer axis.

• 소성∙가공
• /
• 제20권8호
• /
• pp.527-533
• /
• 2011

In order to take into account the strong anisotropy and the tension-compression asymmetry of AZ31 sheet alloy, the Cazacu-Plunkett-Barlat yield criterion(Cazacu, 2006), CPB06, was adopted in the present material modeling. The variation of anisotropic coefficients which describe the yield surface evolution of AZ31 is optimized using an interpolation function based on specific calibration results. It generates continuous yield surfaces, which makes it possible to describe the different hardening rates in tension and compression as well as tension-compression asymmetry of magnesium alloys. The ability of the CPB06 yield criterion to predict experimental results was demonstrated and compared with that of the Hill(1948) yield criterion.

• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 2013년도 자성 및 자성재료 국제학술대회
• /
• pp.29-29
• /
• 2013

We predict agigantic perpendicular magnetocrystalline anisotropy (MCA) in Fe (001) capped by 5d transition metal (TM) overlayers by using first principles calculations. Analysis of atom-by-atom contribution to MCA reveals that gigantic MCA as large as 11 meV/TM originates not from Fe atoms but from the 5d TMs through the strong spin-orbit coupling. More specifically, it is the hybridization between TM and Fe d orbitals that also induces non-negligible magnetic moments in TM. Furthermore, spin-channel decompositions of MCA matrix with and without the presence of Fe substrate identify the electronic origin of the perpendicular MCA that the down-down channel contribution plays the most crucial role for the sign changes of MCA of TM overlayers upon the hybridization with Fe-3d.

• 반도체디스플레이기술학회지
• /
• 제3권1호
• /
• pp.31-34
• /
• 2004

We develop Mueller-matrix spectroscopic ellipsometry based on dual compensator configuration. This technique is very powerful for measuring surface anisotropy in nano-scale, especially when materials show depolarization. Dual-rotating compensator configuration is adopted with the rotational ratio of 5:3 originally developed by Collins et al[1]. The instrument can provide 250-point spectra over the wavelength range from 230 nm to 820 nm in one irradiance waveform with minimum acquisition time of Tc=10 s. In this work, the results obtained in transmission modes are presented for the initial attempt. We present calibration procedures to diagnose the system from the utilized data collected in transmission mode without sample. We expect that the instrument will have important applications in thin films and surfaces that have anisotropy and inhomogeneity.

• 한국반도체및디스플레이장비학회:학술대회논문집
• /
• 한국반도체및디스플레이장비학회 2003년도 추계학술대회 발표 논문집
• /
• pp.12-17
• /
• 2003

We develop Mueller-matrix spectroscopic ellipsometry based on dual compensator configuration. This technique is very powerful for measuring surface anisotropy in nano-scale, especially when materials show depolarization. Dual-rotating compensator configuration is adopted with the rotational ratio of 5:3 originally developed by Collins et al [1]. The instrument can provide 250-point spectra over the wavelength range from 230 nm to 820 nm in one irradiance waveform with minimum acquisition time of $Tc{\approx}10 s$. In this work, the results obtained in transmission modes are presented for the initial attempt. We present calibration procedures to diagnose the system from the utilize data collected in transmission mode without sample. We expect that the instrument will have important applications in thin films and surfaces that have anisotropy and inhomogeneity.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2008년도 춘계학술대회 논문집
• /
• pp.396-399
• /
• 2008

A visco-plastic self-consistent (VPSC) polycrystal model has been applied to simulate texture simulation and anisotropic properties of DP steels during deep drawing process. In order to evaluate the strain path during deep drawing, a steady state was assumed in the flange part of deep drawn cup. The final stable orientations were strongly dependent on the initial location in the blank. The evolution of anisotropy of DP steel sheets has been demonstrated through comparison of plastic strain rate vector at the different plastic strain levels.