• 식물분류학회지
• /
• 제36권4호
• /
• pp.309-333
• /
• 2006

한국산 향유속 분류군의 분류학적 개정을 위해 영양기관과 생식기관 형질 [외부형태학, 미세형태학, 해부학(엽신, 엽병, 줄기), 화분, 소견과]의 상세한 비교연구를 수행하였다. 한국산 향유속의 화서는 원통형으로 배열되는 분류군도 있으나 대개 꽃이 한쪽으로 치우쳐서 배열하고, 길이는 0.5-10 cm이다. 잎은 난형 혹은 선형으로 길이는 0.2-10 cm이고, 너비는 0.2-6 cm이다. 화서와 잎의 종마다 다른 크기와 모양 등은 종간 구별에 유용한 형질로 나타났다. 식물체의 잎과 포에는 불규칙형(anomocytic)과 교차형(diacytic)의 기공복합체가 관찰되었으며, 소견과의 형태는 난형으로 표면무늬는 다공형이고, 과피는 모두 점액성과피(myxocarpy)의 특징을 가졌다. 화분의 크기는 대부분 중립, 모양은 아장구형, 발아구는 6구형이고, 표면무늬는 전형적인 이중 망상형(bireticulate)이었다. 한국산 향유속 식물에 대한 분류학적 개정을 하였다. 4개의 종이 구별되었고, 각 분류군의 기재문과 검색표를 제시하였다.

• Restorative Dentistry and Endodontics
• /
• 제43권2호
• /
• pp.16.1-16.9
• /
• 2018

Objectives: Understanding the reason for an unsuccessful non-surgical endodontic treatment outcome, as well as the complex anatomy of the root canal system, is very important. This study examined the cross-sectional root canal structure of mandibular first molars confirmed to have failed non-surgical root canal treatment using digital images obtained during intentional replantation surgery, as well as the causative factors of the failed conventional endodontic treatments. Materials and Methods: This study evaluated 115 mandibular first molars. Digital photographic images of the resected surface were taken at the apical 3 mm level and examined. The discolored dentin area around the root canal was investigated by measuring the total surface area, the treated areas as determined by the endodontic filling material, and the discolored dentin area. Results: Forty 2-rooted teeth showed discolored root dentin in both the mesial and distal roots. Compared to the original filled area, significant expansion of root dentin discoloration was observed. Moreover, the mesial roots were significantly more discolored than the distal roots. Of the 115 molars, 92 had 2 roots. Among the mesial roots of the 2-rooted teeth, 95.7% of the roots had 2 canals and 79.4% had partial/complete isthmuses and/or accessory canals. Conclusions: Dentin discoloration that was not visible on periapical radiographs and cone-beam computed tomography was frequently found in mandibular first molars that failed endodontic treatment. The complex anatomy of the mesial roots of the mandibular first molars is another reason for the failure of conventional endodontic treatment.

• Clinics in Orthopedic Surgery
• /
• 제10권4호
• /
• pp.462-467
• /
• 2018

Background: Significant discrepancy exists between anatomical plate designs and the anatomy of the native distal radius, which may be attributable to considerable morphometric variations in the volar aspect of the distal radius. We aimed to evaluate the degree of variability in the morphometry of the distal radius and identify factors associated with this variability. Methods: We measured the volar surface angle (VSA) of the intermediate and lateral columns and the volar surface width (VSW) in the distal radius from three-dimensional computed tomography scans acquired from 81 cadaveric forearms. These morphometric parameters were compared between the lateral and intermediate columns, between males and females, and between Koreans and Caucasians. Caucasian morphometric data were obtained and pooled from the previous studies. The coefficient of variation was used to assess the variability of the parameters and Cohen's d to estimate the effect size of the difference between groups. Results: The average VSA of the lateral column was $22^{\circ}{\pm}6^{\circ}$, and that of the intermediate column was $29^{\circ}{\pm}8^{\circ}$ in Koreans (p < 0.001). The variability was high for both VSAs. The VSA of the intermediate column was significantly larger in males than in females (p < 0.001) and in Caucasians than in Koreans (p < 0.001). The average VSW of distal radius was $30{\pm}3mm$ at the watershed line, and it became narrower proximally. The VSW was significantly larger in males than in females (p < 0.001) and in Koreans than in Caucasians (p < 0.001). The effect sizes of the difference for the VSA and VSW between sexes, races and columns were medium to large. Conclusions: Considerable variability exists in the morphometry of the volar distal radius, with sex, race, and column as contributing factors. These results suggest that surgeons should carefully choose an anatomical volar locking plate with appropriate angulation characteristics for each patient to achieve patient-specific alignment of the distal radius.

• Imaging Science in Dentistry
• /
• 제53권4호
• /
• pp.325-333
• /
• 2023

Purpose: The objective of this study was to evaluate and compare the accuracy and image quality of root surface area (RSA) measurements obtained with various cone-beam computed tomography (CBCT) protocols, relative to the gold standard of micro-computed tomography (CT), in an in vitro setting. Materials and Methods: Four dry human skulls were scanned using 8 different protocols, with voxel sizes of 0.15 mm, 0.3 mm, and 0.4 mm. Three-dimensional models of the selected teeth were constructed using CBCT and microCT protocols, and the RSA was automatically measured by the image-processing software. The absolute difference in the percentage of the RSA(%ΔRSA) was calculated and compared across the 8 CBCT protocols using repeatedmeasures analysis of variance. Finally, image quality scores of the RSA measurements were computed and reported in terms of percent distribution. Results: No significant differences were observed in the %ΔRSA across the 8 protocols (P>0.05). The deviation in %ΔRSA ranged from 1.51% to 4.30%, with an increase corresponding to voxel size. As the voxel size increased, the image quality deteriorated. This decline in quality was particularly noticeable at the apical level of the root, where the distribution of poorer scores was most concentrated. Conclusion: Relative to CBCT protocols with voxel sizes of 0.15mm and 0.3mm, the protocols with a voxel size of 0.4 mm demonstrated inferior image quality at the apical levels. In spite of this, no significant discrepancies were observed in RSA measurements across the different CBCT protocols.

• Applied Science and Convergence Technology
• /
• 제25권3호
• /
• pp.51-55
• /
• 2016

The surface treatment of a titanium implant is investigated with a non-thermal atmospheric pressure plasma jet. The plasma jet is generated by the injection of He and $O_2$ gas mixture with a sinusoidal driving voltage of 3 kV or more and with a driving frequency of 20 kHz. The generated plasma plume has a length up to 35 mm from the jet outlet. The wettability of 4 different titanium surfaces with plasma treatments was measured by the contact angle analysis. The water contact angles were significantly reduced especially for $O_2/He$ mixture plasma, which was explained with the optical emission spectroscopy. Consequently, plasma treatment enhances wettability of the titanium surface significantly within the operation time of tens of seconds, which is practically helpful for tooth implantation.

• Asian Spine Journal
• /
• 제12권6호
• /
• pp.1123-1126
• /
• 2018

Study Design: Observational study. Purpose: To assess the correlational accuracy between the traditional anatomic landmarks of the neck and their corresponding vertebral levels in Southern Chinese patients. Overview of Literature: Recent studies have demonstrated discrepancies between traditional anatomic landmarks of the neck and their corresponding cervical vertebra. Methods: The center of the body of the hyoid bone, the upper limit of the lamina of the thyroid cartilage, and the lower limit of the cricoid cartilage were selected as representative surface landmarks for this investigation. The corresponding vertebral levels in 78 patients were assessed using computed tomography. Results: In both male and female patients, almost none of the anatomical landmarks demonstrated greater than 50% correlation with any vertebral level. The most commonly corresponding vertebra of the hyoid bone, the lamina of the thyroid cartilage, and the cricoid cartilage were the C4 (47.5%), C5 (35.9%), and C7 (42.3%), respectively, which were all different from the classic descriptions in textbooks. The vertebral levels corresponding with the thyroid and cricoid cartilage were significantly different between genders. Conclusions: The surface landmarks of the neck were not accurate enough to be used as the sole determinant of vertebral levels or incision sites. Intra-operative fluoroscopy is necessary to accurately locate each of the cervical vertebral levels.

• 한국작물학회지
• /
• 제36권6호
• /
• pp.560-567
• /
• 1991

콩잎의 광합성능력이 잎의 내부형태 변이와 관련되어 있는지 검토하기 위해 대두품종 ‘Hodg-son 78’을 공시하여 포장실험을 수행하였다. 잎의 내부 형태면이를 촉진시키기 위해 착협시(R3 stage)에 유아주기 (1m이랑당 26주에서 6.5주)와 곁가지 치기를 통해 source활성 증대를, 계속적인 꼬투리 제거 (절위당 한개의 꼬투리만 남김)를 통해 sink활성 감소를 시도하였다. 협신장기(R4 stage)로부터 3-4일 간격으로 5회에 걸쳐 제 10절위 복엽의 중앙소엽을 대상으로 기체교환특성, 잎의 두께, 엽육세포의 체적 및 표면적, 그리고 주변 미기상변수를 측정하였다. 가설검증을 위해 기존의 광합성모형을 엽육세포의 표면적이 기체확산과, 엽육세포의 체적이 생화학적 활성과 관련되도록 수정하였다. 실측 광합성속도의 변이가운데 79%는 이 수정된 모형에 의해 설명 가능하였으며, 엽내부형태의 영향을 무시한 기존의 광합성모형에 비해 평균 14.5%의 추정능력 향상을 확인할 수 있었다.

• The Korean Journal of Pain
• /
• 제22권1호
• /
• pp.47-51
• /
• 2009

Background: The blind sacroiliac joint (SIJ) block cannot always be performed accurately; it is commonly performed in the office based setting because intraarticular and periarticular injections are effective for SIJ pain. However, knowledge on the surface anatomy of the SIJ is lacking. The purpose of this study was to analyze the surface anatomical location of the posterior-inferior margin of the SIJ. Methods: After informed consent was obtained, fifty patients undergoing SIJ block in the prone position were examined. The oblique angles where the anterior-inferior margin and the posterior-inferior margin of the SIJ overlap on X-ray were evaluated. In addition, the surface anatomical relationships between the posterior-inferior margin of the SIJ on X-ray and the posterior superior iliac spine (PSIS) and sacral hiatus by palpation were assessed. Results: The oblique angle was $5.4{\pm}2.9^{\circ}$. The vertical and transverse distance between the posterior-inferior margin of the SIJ and PSIS were $3.8{\pm}0.8cm$ and $0.9{\pm}0.6cm$, respectively. The vertical and transverse distance between the posterior-inferior margin of the SIJ and the midpoint of the sacral hiatus were $3.4{\pm}0.7cm$ and $3.9{\pm}0.6cm$, respectively. Only the vertical distance between the posterior-inferior margin of the SIJ and PSIS showed significant difference between the male and the female groups (P = 0.0016). Conclusions: The measurements in this study can be used as a reference standards for the blind SIJ block.

• Journal of the Korean Wood Science and Technology
• /
• 제26권2호
• /
• pp.29-37
• /
• 1998

An image analysis program with the function of measuring various quantitative characteristics in the transverse surface of wood was developed using Delphi 2.0. Data on pore characteristics (conditions for image processing, proportion of pores in relationship to other elements, tangential diameter, area, tangential and radial diameter, x and y coordinates of pore center, and geometric coefficients) were saved in text file format. In addition, the pore area histogram in the tangential and radial directions was saved as a BMP (bitmap) type file. Analyses indicated that quantitative characteristics such as the relative radial distribution of pores in a growth ring, pore tangential area histogram, and proportion of pore in lumen area appear to be useful in separating four diffuse-porous woods and four ring-porous woods on the species level.

• 한국가시화정보학회:학술대회논문집
• /
• 한국가시화정보학회 2004년도 Proceedings of 2004 Korea-Japan Joint Seminar on Particle Image Velocimetry
• /
• pp.135-140
• /
• 2004

Several studies have utilized physical models of the healthy nasal cavity to investigate the relationship between nasal anatomy and airflow. With our experiences of experimental investigations on nasal airflows in normal and abnormal nasal cavity models, we are going to deal with the topic that may contribute to the diagnosis and treatment of nasal diseases. In this paper, airflows in the normal and artificially deformed models, which simulate surgical treatment, are investigated experimentally by PIV. High-resolution CT data and careful surface rendering of computational model with the help of the ENT doctor provide more sophisticated nasal cavity models. The CBC PIV (Correlation Based Correction PIV) algorithm with window offset is used for PIV flow analysis. Average and RMS distributions in sagittal and coronal sections are obtained for inspiratory and expiratory nasal airflows. Comparisons in nasal airflows for both normal and deformed cases are also appreciated. In case of simulations of surgical operations, velocity and RMS distributions in coronal section changes locally, this may cause some difficulties in physiologic functions of noses and may hurt mucosal surface.