• 한국음향학회지
• /
• 제3권2호
• /
• pp.23-29
• /
• 1984

In this paper surface acoustic wave beam track changers using symmetric multistrip coupler are designed on the basis of the perturbation theory, and its characteristics are studied. SAW beam track changers, which have the configuratio of the periodic array of metal strips, are designed with the following specifications ; the number of strips : 140, the strip period: 0.25λ, the ratios of the strip width to the period a/p: 0.5, 0.375, 0.25, respectively, and approximately consistent with the theoretical values, and also the bulk wave mode and the 2nd-order effects are suppressed by these track changers.

• 비파괴검사학회지
• /
• 제19권5호
• /
• pp.340-346
• /
• 1999

액체/고체 경계면에 표면파가 발생할 때 나타나는 최소반사 및 후방복사 현상을 이용하여 brass와 aluminum 시편 그리고 copper/stainless steel, nickel/brass, nickel/aluminum 도금시편에 대한 표면 탄성파 속도의 주파수 의존성이 측정되었다. 측정된 속도의 분산관계는 일반화 램 표면파의 분산 특성과 잘 일치하였다. 시편들의 분산 특징에 따라 최소반사와 후방복사에 의해 결정된 속도 차이의 경향이 다르게 나타났다. 이러한 대응 관계는 두 현상의 생성 메커니즘과 군속도의 도입으로 설명되었다.

• 한국음향학회지
• /
• 제10권1호
• /
• pp.71-82
• /
• 1991

• 한국음향학회지
• /
• 제11권4호
• /
• pp.45-52
• /
• 1992

• 한국음향학회지
• /
• 제20권1호
• /
• pp.62-67
• /
• 2001

직선집속 PVDF 초음파 트랜스듀서를 이용하여 누설탄성표면파 (Leaky Surface Acoustic Wave: LSAW)의 전파속도를 측정하고, 그 결과를 이론해석 결과와 비교하였다. 시료로는 등방성 재료인 구리, 알루미늄 및 용융석영, 이방성 재료인 Z-cut α/sup-/수정을 사용하였다. 측정방법으로는 초점면에 위치한 시료를 트랜스듀서 쪽으로 접근시켰을 때 LSAW가 트랜스듀서의 중심축을 통과한 후 시료표면에서 직접 반사되어오는 종파와 분리되어지는 현상을 이용하였다. 음속의 측정결과는 이론 해석결과와 오차 1％이내에서 잘 일치하였으며,α/sup-/수정의 (0,0,1)면에서는 LSAW 외에 의사누설탄성표면파 (Leaky Pseudo Surface Acoustic Wave : LPSAW)가 전형적인 6-fold 이방성을 가지고 전파됨을 알 수 있었다.

• The Journal of the Acoustical Society of Korea
• /
• 제25권2E호
• /
• pp.60-68
• /
• 2006

High-frequency bistatic scattering measurements from a corrugated surface were made in an acoustic water tank. First the azimuthal scattering pattern was measured from an artificially corrugated surface which has varying impedance. The corrugated surface was installed both transverse to the direction of incident wave and longitudinal to the direction of incident wave. The angle between the corrugated surface and the direction of the incident wave was about $45^{\circ}$. Second, the scattering strengths were measured from the flat sediment and the corrugated sediment. A critical angle of about $37^{\circ}$ was calculated in the acoustic water tank. The measurements were made at three fixed grazing angles: $33^{\circ}$ (lower than critical angle), $37^{\circ}$ (critical angle), and $41^{\circ}$ (higher than critical angle). The scattering angle and the grazing angle are equal in each measurement. Frequencies were from 50 kHz to 100 kHz with an increment of 1 kHz. The corrugated sediment was made transverse to the direction of the incident wave. The first measurement indicates that the scattering patterns depend on the relations between the corrugated surface and the direction of the incident wave. In the second measurement, the data measured from the flat sediment were compared to the APL-UW model and to the NRL model. The NRL model's output shows more favorable comparisons than the APL-UW model. In case of the corrugated sediment, the model and the measured data are different because the models used an isotropic wave spectrum of sediment roughness in the scattering calculations. The isotropic wave spectrum consists of $w_2$ and ${\gamma}_2$. These constants derived from sediment names or bulk size. The model which used the constants didn't consider the effect of a corrugated surface. In order to consider a corrugated surface, the constants were varied in the APL-UW model.

• 한국음향학회지
• /
• 제3권2호
• /
• pp.13-22
• /
• 1984

A surface acoustic wave signal processing device using the silicon surface state is presented and shown capable of storing a reference signal and later correlating another signal with the stored reference. The device memory consists of the storage of the spatial 2k pattern of an acoustic wave as stored charges in the surface state of silicon surface. Results of experiments are presented which characterize the operation of device. Simpliied models for charging process and nonlinear acoustoelectric interactions based on consideration of single surface state at the surface of silicon The validity of simplified model has been qualitatibely confirmed with experimental results and the application of this device to aprogrammable matched filter of communication is considered.

• 한국음향학회:학술대회논문집
• /
• 한국음향학회 1999년도 학술발표대회 논문집 제18권 1호
• /
• pp.303-306
• /
• 1999

The paper describes a theoretical study on the speed of the torsional elastic waves propagating in a circular cylinder whose outer radius varies periodically as a harmonic function of the axial coordinate. The approximate solution for the phase speed has been obtained using the perturbation technique for sinusoidal modulation of small amplitude. It is shown that the wave speed in the cylinder with a corrugated outer surface is less than that in a smooth cylinder by the square of the amplitude of the surface perturbation. This theoretical prediction agrees reasonably with an experimental observation reported earlier. It is also shown that the wave speed reduction due to the surface corrugation becomes larger for a thinner cylinder and for a bigger density of corrugation.

• 한국음향학회지
• /
• 제1권1호
• /
• pp.37-44
• /
• 1982

In the mixed layer when the frequency approaches the cut-off frequency for the first mode of notmalmode theory, sound ceases to be trapped. Based on the data of surface sound velocities abtained during the period of 16 years in the Sea of Japan. A new cut-off frequency coefficient in the surface duct that will determine the miximum wave length for duct transimission of underwater sound has been calculated.

• 한국음향학회:학술대회논문집
• /
• 한국음향학회 1999년도 학술발표대회 논문집 제18권 1호
• /
• pp.403-408
• /
• 1999

In this paper, ultrasonic tomography by the Mode-Converted Rayleigh wave (MCRW) in the back-scattered direction is presented. When a beam with a short pulse and narrow beam width enters a reflector with smooth surface, in general, two major arrivals can be observed in the output waveform: the specular reflection and the radiation of the MCRW from the reflector surface. The time-delay between the two waves is relatively large and thus can be measured easily. This large time-delay is due to the fact that the MCRW is slower than incident wave. In our method, this large time- delay is used for ultrasonic image reconstruction. To effectively detect the MCRW, the arrayed-receiving transducers are circularly arranged around the transmitter. In addition, a deconvolution method is employed to remove specular echo signals for reconstructing the MCRW image.