• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.10a
• /
• pp.151-157
• /
• 2004

In this paper, we propose a simple control scheme, based on second order sliding modes, which guarantees a fast and precise container transfer and the swing suppression during the container movement, despite of model uncertainties and unmodeled dynamic actuators. In the actual case, the swing suppression is obtained by constraining the system motion on a suitable surface which involves both the desired path and the swing angle. Strictly speaking, the trolley velocity is modified on-line, on the actual swing angle, to obtain the suppression of the oscillations not only at the end of the transport but during transfer as well. Such controller has been tested on a laboratory-size model of the 3Dcrane, and some experimental results are reported.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.18 no.6
• /
• pp.743-754
• /
• 2015

FASCAM is a newly introduced mean against enemy fire power and supposed to be scattered on base areas in front of a tunnel so as to deter maneuver and shooting of enemy artilleries. However, for its characteristics different from conventional munitions, only a few studies have been undertaken on operations system using this new measure. In this research, we propose a procedure to describe and analyze mathematically an operation system for suppression of enemy fire power using FASCAM. Two suggested simulation methods, impact point generation and density integration, both can describe the actual operation rationally and each has advantages of its own respectively. Further, we demonstrated an example analysis to derive an optimal suppression plan based on the proposed procedure.

• Journal of Communications and Networks
• /
• v.10 no.1
• /
• pp.63-70
• /
• 2008

Narrow-band interference (NBI) from the coexisting narrow-band services affects the performance of ultra wideband (UWB) systems considerably due to the high power of these narrow-band signals with respect to the UWB signals. Specifically, IEEE 802.11a systems which operate around 5 GHz and overlap the band of UWB signals may interfere with UWB systems significantly. In this paper, we suggest a novel NBI suppression technique based on singular value decomposition (SVD) algorithm in time hopping UWB (TH-UWB) systems. SVD is used to approximate the interference which then is subtracted from the received signals. The algorithm precision and closed-form bit error rate (BER) expression are derived in the wireless multipath channel. Comparing with the conventional suppression methods such as a notch filter and a RAKE receiver, the proposed method is simple and robust and especially suitable for UWB systems.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2006.05a
• /
• pp.43-44
• /
• 2006

The performance of the direct adaptive time-delay filter depends on the select time-delay. In this paper, the authors introduce a new scheme to adapt the time-delay which is to be used in conjunction with the direct adaptive command shaping for the improved vibration suppression in flexible motion system. In order to formulate the time-delay adaptation scheme, the authors have analyzed the effect of the time-delay value on the performance of the direct adaptive command shaping filter. By modifying the direct adaptation formula based on the analysis result the authors have established a set of equations to adapt the time-delay toward the optimal value. Simulation results show the effectiveness of the proposed time-delay adaptation approach for the improved vibration suppression.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.34S no.8
• /
• pp.10-19
• /
• 1997

In this paper, perfodrmance of matched-filter (MF) acquisition scheme is analyzed for a direct-sequence/code-division-multiple-access (DS/CDMA) system in a microcellular environment. Mean acquistion time is used as a performance measure. It is demonstrated that acquisition performance is enhanced using interference suppression filter in a Rician fading channel. To apply for multiuser environments, multiple access interference is considered in the performance analysis. From the numerical results, it is shown that mean acquistion time decreases with the increasing SNR/chip, and acquisition performance is improved as the number of taps of interference suppression filter. It is also shown that mean acquisition time increases with the number of users in the system, and acquistion performance is degraded as the icrease of narrowband interference bandwidth. The analysis in this paper can be applied to a DS/CDMA overlay environment.

• Journal of Ship and Ocean Technology
• /
• v.12 no.4
• /
• pp.20-31
• /
• 2008

Development of rudder gap flow blocking device for lift augmentation and cavitation suppression is presented. In order to verify the performance of this device, cavitation visualization and surface pressure measurements were carried out in a cavitation tunnel. Numerical simulations were conducted using a computational fluid dynamics code for more rigorous verification. The new rudder system is equipped with cam devices, which effectively close the gap between the horn/pintle and movable wing parts. The experimental and computational results show that the proposed rudder system is superior to the conventional rudder systems in terms of the lift augmentation and cavitation suppression.

• Nuclear Engineering and Technology
• /
• v.14 no.3
• /
• pp.110-115
• /
• 1982

The mechanism of the suppression effect of the extraction of microquantities of an element in the presence of microquantities of another element in some solvent extraction systems is considered. For the system of metal halide complex acids, it has been revealed that the principal cause of the suppression phenomenon is due to the dissociation of the compounds extracted into the organic phase. The various factors, such as relative value of distribution ratios of the individual micro and macroelements, stability of halide complex anion are discussed, and a equation relating those factors are derived.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.53 no.5
• /
• pp.264-267
• /
• 2004

Recently the pulsed power systems have been widely used in many fields such as E/P(Electrostatic Precipitator), DeNOx/DeSOx power systems, ozone generators and power sources of the laser beam. In this paper, we studied various electrical characteristics for arc suppression of line-to-line electrodes in air and removal of the metaloxide using our pulsed power system. To obtain high efficiency of the pulsed power system, we repeatedly experimented and tested their characteristics. by adjusting electrode length of the load. As a result, when the value of the electrode length and pulse repetition rate were changed at the load, the value of the arc voltage changed at the electrode load. In conclusion, we controlled arc voltage of the load by ,changing electrode length and pulse repetition rate. Also. we stydied removal area of the metaloxide using area discharge according to pulse repetition rate.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2005.11a
• /
• pp.929-929
• /
• 2005

In this study, computational demonstrations for the flutter suppression are presented for the 3-DOF airfoil system with oscillating flap. Advanced computational methods such as computational fluid dynamics (CFD) and computational structural dynamics (CSD) are used and a simultaneous coupling method has been developed to accurately conduct flutter analyses. In addition, optimal control theory is integrated into the CFD based flutter analysis method to construct the coupled aeroservoelastic analysis system for the airfoil with oscillating flap. For a well-defined typical section model, fundamental unsteady aerodynamics and flutter characteristics are investigated. Finally, to show the effectiveness of flutter control the physical aeroelastic responses are directly compared between the open loop and the closed loop systems.

• Journal of the Semiconductor & Display Technology
• /
• v.21 no.3
• /
• pp.33-38
• /
• 2022

A solar power generation system uses a solar module that collects solar radiation energy, a connecting board that collects DC power generated from the solar module, and a diode to prevent reverse current from flowing from an inverter to the solar module. The existing photovoltaic connection module consists of only fuses and diodes for reverse polarity and overcurrent blocking, and does not have fire diagnosis, prevention, and suppression functions in the event of a fire. To solve this problem, this paper presents a method to monitor the internal state of the photovoltaic connection module using several sensors and to prevent and extinguish a fire using solenoid valves and fire extinguishing agents when a fire is detected. Through the experiment, it was confirmed that the proposed method normally suppresses the fire in event of a fire.