• Smart Structures and Systems
• /
• v.21 no.3
• /
• pp.305-320
• /
• 2018

The second half of the 20th century was marked with a significant raise in amount of railway bridges in Austria made of reinforced concrete. Today, many of these bridges are slowly approaching the end of their envisaged service life. Current methodology of assessment and evaluation of structural condition is based on visual inspections, which, due to its subjectivity, can lead to delayed interventions, irreparable damages and additional costs. Thus, to support engineers in the process of structural evaluation and prediction of the remaining service life, the Austrian Federal Railways (${\ddot{O}}$ BB) commissioned the formation of a concept for an anticipatory life cycle management of engineering structures. The part concerning concrete bridges consisted of forming a bridge management system (BMS) in a form of a web-based analysis tool, known as the LeCIE_tool. Contrary to most BMSs, where prediction of a condition is based on Markovian models, in the LeCIE_tool, the time-dependent deterioration mechanisms of chloride- and carbonation-induced corrosion are used as the most common deterioration processes in transportation infrastructure. Hence, the main aim of this article is to describe the background of the introduced tool, with a discussion on exposure classes and crucial parameters of chloride ingress and carbonation models. Moreover, the article presents a verification of the generated analysis tool through service life prediction on a dozen of bridges of the Austrian railway network, as well as a case study with a more detailed description and implementation of the concept applied.

• Journal of Information Technology Services
• /
• v.14 no.3
• /
• pp.183-196
• /
• 2015

The concept of energy-efficient networking has begun to spread in the past few years, gaining increasing popularity. A common opinion among networking researchers is that the sole introduction of low consumption silicon technologies may not be enough to effectively curb energy requirements. Thus, for disruptively boosting the network energy efficiency, these hardware enhancements must be integrated with ad-hoc mechanisms that explicitly manage energy saving, by exploiting network-specific features. The IEEE 802.3az Energy Efficient Ethernet (EEE) standard is one of such efforts. EEE introduces a low power mode for the most common Ethernet physical layer standards and is expected to provide large energy savings. However, it has been shown that EEE may not achieve good energy efficiency because mode transition overheads can be significant, leading to almost full energy consumption even at low utilization levels. Coalescing techniques such as packet coalescing and interrupt coalescing were proposed to improve energy efficiency of EEE, but their implementations typically adopt a simple policy that employs a few fixed values for coalescing parameters, thus it is difficult to achieve optimal energy efficiency. The paper proposes adaptive interrupt coalescing (AIC) that adopts an optimal policy that could not only improve energy efficiency but support performance. AIC has been implemented at the sender side with the Intel 82579 network interface card (NIC) and e1000e Linux device driver. The experiments were performed at 100 M bps transfer rate and show that energy efficiency of AIC is improved in most cases despite performance consideration and in the best case can be improved up to 37% compared to that of conventional interrupt coalescing techniques.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.11
• /
• pp.7285-7292
• /
• 2015

The purpose of this study was to investigate possibility of a forward gait with backward mechanism(dance gait) as rehabilitation and/or walking exercise by means of biomechanical variables. Thirteen professional women dancers(age, $21.1{\pm}1.3yrs$; height, $159.3{\pm}7.2cm$; body mass, $45.1{\pm}8.4kg$)participated in this study. We found that speed, stride length and double limb support time of a dance gait were more greater than backward gait, but stride width of dance gait less than a backward gait. Maximum RoMs, moments and powers of the lower limb joints on a dance gait were more frequent than a backward dance. These results were judged to be sufficient by the possibility of dance gait as rehabilitation and walking exercise.

• The Transactions of the Korea Information Processing Society
• /
• v.4 no.8
• /
• pp.2092-2105
• /
• 1997

In this paper, we propose a load sharing scheme in distributed systems. In the proposed scheme, the state of each host is classified as a server or a source by its current load and, to prevent excessive state changes of each host, we used three threshold values for identifying the current state of each host. Based on the threshold values, some hosts, called brokers, manage the servers registered to them. The brokers, whose number is determined by the system utilization factor and the total number of hosts, support task migration processes from overloaded sources to lightly loaded servers. Also they can hand over the broker's role to another host when it is overloaded. Simulation studies were performed for examining the sensitivity of each system parameters such as threshold values, utilization factor, the number of hosts, and the number of brokers to the system performance indices including mean response time, mean queue length.

• The Journal of Engineering Geology
• /
• v.18 no.4
• /
• pp.545-553
• /
• 2008

Face mapping and displacement monitoring during tunnel construction are the most influential information for the stability assessment of ground and around structures. Especially, the result of face mapping and displacement analysis is essential to the excavation and support design in NATM which is based on the drilling and blasting. However, there have not been so many studies to put those useful information into practice for decision-making process during construction. The study reviewed the tunnel behaviour based on the RMR rating and displacement monitoring when the geological condition of rock mass varies inevitably. The study analysed the crown settlement using convergence equation in order to compensate the disparity induced by the location and time of measurement and found a distinct relation between the geological condition and the line of influence. As a result of analysing the various parameters related to the tunnel convergence according to the geological condition, the study suggested the basic knowledge about the relation between face mapping and displacement behaviour of tunnel.

• Journal of Microbiology and Biotechnology
• /
• v.17 no.5
• /
• pp.784-791
• /
• 2007

The present work aims to use a biofilter technology(aerated submerged filters) for the aerobic transformation at laboratory-scale of olive washing water(OWW) generated in the first steps of olive oil processing, as well as the genetic profiling and identification to the species level of the bacteria involved in the formation of the biofilm, by means of TGGE. Chemical parameters, such as biological oxygen demand at five days($BOD_5$) and chemical oxygen demand(COD), decreased markedly(up to 90 and 85%, respectively) by the biological treatment, and the efficiency of the process was significantly affected by aeration and inlet flow rates. The total polyphenol content of inlet OWW was only moderately reduced(around 50% decrease of the inlet content) after the biofilter treatment, under the conditions tested. Partial 16S rRNA genes were amplified using total DNA extracted from the biofilm and separated by TGGE. Sequences of isolated bands were mostly affiliated to the $\alpha-subclass$ of Proteobacteria, and often branched in the periphery of bacteria] genera commonly present in soil(Rhizobium, Reichenowia, Agrobacterium, and Sphingomonas). The data obtained by the experimentation at laboratory scale provided results that support the suitability of the submerged filter technology for the treatment of olive washing waters with the purpose of its reutilization.

• Journal of Broadcast Engineering
• /
• v.10 no.3
• /
• pp.297-312
• /
• 2005

The multimedia traffic of continuous video and audio data via streaming service accounts for a significant and expanding portion of the Internet traffic. This streaming data delivery is mostly based on RTP with UDP. However, UDP does not support congestion control. For this reason, UDP causes the starvation of congestion controlled TCP traffic which reduces its bandwidth share during overload situation. In this paper, we propose a new TCP-friendly rate control scheme called 'TF-RTP(TCP-Friendly RTP)'. In the congested network state, the TF-RTP exactly estimates the competing TCP's throughput by using the modified parameters. Then, it controls the sending rate of the video streams. Therefore, the TF-RTP adjusts its sending rate to TCP-friendly and fair share with competing TCP traffics. Through the simulation, we prove that the TF-RTP correctly estimates the TCP's throughput and improves the TCP-friendliness and fairness.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.12
• /
• pp.5412-5419
• /
• 2011

The need is growing for high-speed spindle because various equipment are becoming more precise, miniaturization and high speed with the development of industries. Air-lubricated dynamic bearings are widely used in the optical lithographic manufacturing of wafers to realize nearly zero friction for the motion of the stage. Air-lubricated dynamic bearing can be used in high-speed, high-precision spindle system and hard disk drive(HDD) because of its advantages such as low frictional loss, low heat generation, averaging effect leading better running accuracy. In the paper, numerical analysis is undertaken to calculate the performance of air-lubricated dynamic bearing with herringbone groove. The static performances of herringbone groove bearings which can be used to support the thrust load are calculated. Electrochemical micro machining($EC{\mu}M$) which is non-contact ultra precision machining method has been developed to fabricate the air-lubricated dynamic bearing and optimum parameters which are inter electrode gap size, concentration of electrolyte, machining time are simulated using numerical analysis program.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.11
• /
• pp.2107-2112
• /
• 2016

This paper is designed to develop a Gimbal control stabilizer for drones Gimbal system control for drone for 3D image to make sure clean image in the shaking and wavering environments of drone system. The stabilizer is made of tools which support camera modules and IMU(Inertial Measurement Unit) sensor modules follow exact angles, which can brock vibrations outside of the camera modules. It is difficult for the camera modules to get clean image, because of irregular movements and various vibrations produced by flying drones. Moreover, a general PID controller used for the movements of rolling, pitching and yawing in order to control the various vibrations of various frequencies needs often to readjust PID control parameters. Therefore, this paper aims to conduct the Intelligent-PID controller as well as design the Gimbal control stabilizer to get clean images and to improve irregular movements and various vibrations problems referenced above.

• Journal of KIISE:Databases
• /
• v.31 no.6
• /
• pp.624-640
• /
• 2004

Recently, with the rapid development of location-based techniques, index structures to efficiently manage moving objects have been required. In this paper, we propose a new spatio-temporal index structure that supports a future position retrieval and minimizes a update cost. The proposed index structure combines an assistant index structure that directly accesses current positions of moving objects with KDB-tree that is a space partitioning access method. The internal node in our proposed index structure keeps time parameters in order to support the future position retrieval and to minimize a update cost. Moreover, we propose new update and split methods to maximize the space utilization and the search performance. We perform various experiments to show that our proposed index structure outperforms the existing index structure.