• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 춘계학술대회 논문집 센서 박막재료 반도체 세라믹
• /
• pp.37-40
• /
• 2003

As the integrated circuit device shrinks to the smaller dimension, the chemical mechanical polishing (CMP) process was required for the global planarization of inter-metal dielectric (IMD) layer with free-defect. However, as the IMD layer gets thinner, micro-scratches are becoming as major defects. Micro-scratches are generated by agglomerated slurry, solidified and attached slurry in pipe line of slurry supply system. It is well known that the presence of hard and larger size particles in the CMP slurries increases the defect density and surface roughness of the polished wafers. In this paper, we have studied aging effect the of CMP slurry as a function of particle size. We prepared and compared the self-developed silica slurry by adding of abrasives before and after annealing. As our preliminary experiment results, we could be obtained the relatively stable slurry characteristics comparable to original silica slurry in the slurry aging effect.

• 한국음향학회:학술대회논문집
• /
• 한국음향학회 1994년도 FIFTH WESTERN PACIFIC REGIONAL ACOUSTICS CONFERENCE SEOUL KOREA
• /
• pp.662-667
• /
• 1994

This paper presents the design and construction details of a soundproof enclosure for housing 20 KVA diesel generator-set. As the generator had to be installed close to the hospital building, it was desirable to reduce the transmission of noise by housing the generator in such an enclosure. The diesel engine being an air cooled one, it was essential to supply fresh air into the enclosure for its cooling. Forced inflow of air is provided through an inlet duct located in such a way that the incoming fresh air is thrown close to the inlet of cooling fan of the engine. The high velocity air stream, which heats up while passing over the engine head, escapes to the atmosphere through a rectangular outlet duct with enlarges inlet that receives hot air from the engine. The air ducts were designed specially and have been provided with acoustic lining for sound absorption. The masonary enclosure has been provided with double glazed fixed windows and double doors. The exhaust pipe of the engine fitted with a muffler has been taken out through the enclosure wall facing away from the hospital. Acoustic performance studies conducted in terms of attenuation provided by the enclosure at different frequencies have also been presented and discussed. The noise control measures adopted for building the sound-proof enclosure have been found to be quite effective as the noise levels inside the hospital building are now within the acceptable limits.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2008년 영문 학술대회
• /
• pp.732-736
• /
• 2008

The traditional method to calculate the gravity feed is to assume that only one tank in fuel system supplies the needed fuel to the engine, and then calculated for the single branch. Actually, all fuel tanks compete for supplying oil. Our method takes into consideration all fuel tanks and therefore, we believe, our method is intrinsically superior to traditional methods and is closer to understanding the real seriousness of the oil supply situation. Firstly, the thesis gives the mathematical model for fuel flow pipe, pump, check valve and the simulation model for fuel tank. On the basis of flow network theory and time difference method, we established a new calculation method for gravity feed oil of aeroplane fuel system, secondly. This model can solve the multiple-branch and transient process simulation of gravity feed oil. Finally, we give a numerical example for a certain type of aircraft, achieved the variations of oil level and flow mass per second of each oil tanks. In addition, we also obtained the variations of the oil pressure of the engine inlet, and predicted the maximum time that the aeroplane could fly safely under gravity feed. These variations show that our proposed method of calculations is satisfactory.

• 대한조선학회논문집
• /
• 제56권2호
• /
• pp.143-151
• /
• 2019

This study describes a method for analyzing log data generated in a process using process mining techniques. A system for collecting and analyzing a large amount of log data generated in the process of manufacturing an offshore plant piping material was constructed. The analyzed data was visualized through various methods. Through the analysis of the process model, it was evaluated whether the process performance was correctly input. Through the pattern analysis of the log data, it is possible to check beforehand whether the problem process occurred. In addition, we analyzed the process performance data of partner companies and identified the load of their processes. These data can be used as reference data for pipe production allocation. Real-time decision-making is required to cope with the various variances that arise in offshore plant production. To do this, we have built a system that can analyze the log data of real - time system and make decisions.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2021년도 학술발표회
• /
• pp.146-146
• /
• 2021

A contamination event occurring in water distribution networks (WDNs) needs to be handled with the appropriate mitigation strategy to protect public health safety and ensure water supply service continuation. Typically the mitigation phase consists of contaminant sensing, public warning, network inspection, and recovery. After the contaminant source has been detected and treated, contaminants still exist in the network, and the contaminated water should be flushed out. The recovery period is critical to remove any lingering contaminant in a rapid and non-detrimental manner. The contaminant flushing can be done in several ways. Conventionally, the opening of hydrants is applied to drain the contaminant out of the system. Relying on advanced information and communication technology (ICT) on WDN management, warning and information can be distributed fast through electronic media. Water utilities can inform their customers to participate in the contaminant flushing by opening and closing their house faucets to drain the contaminated water. The household draining strategy consists of determining sectors and timeslots of the WDN users based on hydraulic simulation. The number of sectors should be controlled to maintain sufficient pressure for faucet draining. The draining timeslot is determined through hydraulic simulation to identify the draining time required for each sector. The effectiveness of the strategy is evaluated using three measurements, such as Wasted Water (WW), Flushing Duration (FD), and Pipe Erosion (PE). The optimal draining strategy (i.e., group and timeslot allocation) in the WDN can be determined by minimizing the measures.

• 한국산업융합학회 논문집
• /
• 제26권5호
• /
• pp.757-763
• /
• 2023

Major industrial accidents in which workers die due to fires or explosions while working at chemical substance handling workplaces continue to occur. Among the major industrial accidents that occurred between 2005 and 2021, the accident status by work situation and equipment was analyzed. Through analysis, it was confirmed that storage, reaction, and piping facilities were the main causes of the accident, and a self-checklist for each facility was developed. Verification was conducted through the supply and use groups to evaluate the suitability of the use, duties, and items of the self-checklist. The user group showed higher satisfaction than the supplier group for all three suitability of use, job, and item. In particular, since the inspection items of the self-checklist were organized around the cause of the accident derived through the analysis of actual accident cases, the satisfaction level was high in all groups. It is expected that the self-checklist developed through this study will be useful not only for large companies but also for small and medium-sized chemical industries that lack professional manpower.

• 한국수자원학회논문집
• /
• 제55권spc1호
• /
• pp.1251-1260
• /
• 2022

최근 상수관망은 노후화 및 관 내 스케일의 박리로 인해 적수 사고등 수질사고가 지속적으로 발생하고 있다. 관내 퇴적되어있는 스케일은 평상시엔 안정화되어 문제를 야기하지 않지만, 상수관망 시스템의 급격한 유속 및 유향 변화 등에 의해 발생하는 수충격에 의해 박리된 후 수용가로 유입되며 수질사고를 야기한다. 이를 사전에 방지하기 위해서는 주기적인 관세척으로 스케일을 제거할 필요가 있다. 관세척공법 중 가장 보편적으로 사용되는 방법은 플러싱으로 현재 국내·외에서 관세척을 위한 유속 및 세척기준 연구가 활발하게 진행되고 있다. 하지만, 플러싱 공법 적용 시 적정유속 기준에 관한 연구가 주로 진행되어, 세척시 관내 적정유속 확보여부를 사전에 검토하기 위한 구체적인 방안에 관한 연구는 미흡한 실정이다. 관 세척시 용수는 소화전 또는 이토변을 통과하면서 주손실과 미소손실이 발생하며, 이는 관 내 유속에 영향을 미치는 요인으로 세척효과 분석에 직접적인 영향을 준다. 이에 본 연구는 Minorloss Coefficient와 Emitter Coefficient를 적용한 모의를 통해 플러싱 적용 시 관 내 유속을 분석하는 수리해석 방법을 제안하였다. 제안한 방법을 예시관망과 A시 일부구역에 적용하여 적절성을 검토하고, 소화전과 이토변의 세척효과를 비교하였다. 적용 결과 소화전을 통과하는 수리학적 조건을 고려하지 않은 경우, 실제 발생하는 손실을 고려하지 못해 소화전에서 방출 가능한 유량 대비 큰 유량과 유속이 산출되는 결과를 보였고, 이토변의 경우는 긴 세척구간에도 세척유속과 유량의 확보가 용이하여 소화전에 비해 시간적. 효율적으로 큰 세척효과가 있을 것으로 판단하였다. 하지만, 실제 상수관망의 적용 시 이토변은 소화전에 비해 설치 개수가 적어 적용이 제한적이다. 이와같은 특성을 이해하여 실무자의 판단과 대상지역의 특징에 따라서 적절한 세척계획을 수립하는 것이 필요할 것으로 판단된다.

• 대한기계학회논문집B
• /
• 제34권2호
• /
• pp.213-218
• /
• 2010

인공위성 적외선 탑재체의 열싱크 역할을 위해, 액체헬륨을 이용하여 극저온패널(가로 약 800 mm, 세로 약 700 mm)을 4.2 K까지 냉각시키는 시스템을 설계, 개발, 검증하였다. 유효직경 8 m, 유효 깊이 10 m의 대형열진공챔버에서 검증된 본 냉각시스템은 500리터 용량의 액체헬륨용기 두 개(극저온 패널로의 액체헬륨 또는 저온헬륨가스 주 공급용기 및 주공급용기로의 재충진용기)를 사용하였는데, 목표인 극저온패널의 냉각 및 온도제어는 주 공급용기 내부의 미세압력조절을 통해 액체헬륨 공급유량을 제어함으로써 이루었다. 극저온패널에 공급된 후 배기되는 저온 헬륨가스는 특별히 설계, 제작된 사중진공배관의 제3층을 흐르며 열차단막의 역할을 수행함으로써, 액체헬륨 공급 라인인 제1층(중심배관)으로의 열유입을 최소화하였다. 극저온패널을 상온에서 40 K(합성표준불확도 194 mK)까지 냉각시키는데 약 3시간이 소요되었으며, 20 W의 열을 발산하는 극저온패널을 40 K 주변 온도에서 1 K 이내의 온도균일도를 가지며 유지할 수 있었다.

• 한국환경보건학회:학술대회논문집
• /
• 한국환경보건학회 2005년도 국제학술대회
• /
• pp.263-272
• /
• 2005

Chlorine disinfection has been used in drinking water supply to disinfect the water-borne microbial disease which may cause to serious human disease. it is still the least costly, relatively easy to use, Chlorination is the primary means to disinfect portable water supplies and control bacterial growth in the distribution system. However, chlorine reacts with natural organic matter(NOM), that presents in nearly all water sources, and then produces disinfection by-products(DBPs), that have adverse health effects. Although the existent DBPs have been reported in drinking water supplies, it is not feasible to predict the levels of the various DBPs due to the complex chemistry reaction involved. 1. The objectives of this study is to investigate seasonal variation difference concentration of DBPs in the plant to tap water. The average concentration of THMs was 20.04 ${\mu}g/{\ell}$ , HAAs 8-15 ${\mu}g/{\ell}$ , HANs 2-4.5 ${\mu}g/{\ell}$ respectively. 2. Distant variation of DBPs furmation by the distance is that THMs concentration increased by 17% at 2km point from the plant and by 28% at 7km and HAAs, HANs also increase each by 16%, 32% at 2 km from the plant and 35%, 56% at 7 km. DBPs increase in water supply pipe continually, 3. The seasonal occurrence of BBPs is that in May and August DBPs concentration is very higher than in march, in May DBPs concentration is highest. The temperature is main factor of DBPs formation, precursor also. 4. Precursor which was accumulated for winter flowed into the raw water by flooding in spring and summer and produced DBPs. 5. Therefore for the supply of secure drinking water, it is required to protect precursor of flowing into raw water and to add to BCAA and DBAA to drinking water standards.

• 대한환경공학회지
• /
• 제35권5호
• /
• pp.312-320
• /
• 2013

상수도관망에서의 입자성 물질들은 대부분 금속관로의 내부부식 및 퇴적물에 의한 영향으로 이를 해결할 수 있는 방법은 제한적이라 할 수 있다. 수중의 입자성 물질들은 입자크기, 화합물 성분 및 성상들이 다르며, 이들 특성은 시설별 종류, 관 상태, 외부적 요인 및 공급과정 등에 의해서 차이가 발생하게 된다. 본 연구에서는 상수도관망의 수질조사를 수행하면서 수중의 입자성 물질들에 대한 조사를 실시하고자 하였으며, 정수를 공급하는 각 계통들의 배수지 및 관말지역을 대상으로 실시하였다. 각 조사지점에서 입자성 물질을 포집하기 위해 $47{\phi}$ 의 유리섬유여지(GF/C)를 이용하여 여과를 수행하였다. 수중의 탁도에 영향을 미치는 물질들이 입자성 부유물질과 무기물질들에 의한 것으로 관말지역으로 갈수록 입자성 물질이 증가하는 것으로 조사되었다. XRD를 이용한 입자성 물질의 화합물 성분분석결과 상수도관망의 관말지역에서 가장 많은 화합물은 Goethite (${\alpha}$-FeOOH), Magnetite ($Fe_3O_4$) 등이고 정수와 각 배수지 유출수에서는 Quartz ($SiO_2$)와 Yeelimite ($Ca_4Al_6O_{12}SO_4$) 등도 있는 것으로 조사되어 각 상수도 시설별 용출되거나 잔존하고 있는 화합물 성분이 다르며, 침적물들에도 차이가 있었다.